Elechelf Portable Blender

Specifications

Components List

The picture is only for reference, please make the object as the standard.

• Indicator light
• Switch Button
• Charging Port
• Handles rope
• Sealing Ring
• Mixing Knife
• Cup Sleeve
• Juicer Cup

Diagram Description: The components list shows three main parts of the blender. The first diagram shows the top part of the blender base with an indicator light, switch button, and charging port, along with handles rope and sealing ring at the bottom. The second diagram shows the main body of the blender cup. The third diagram shows the cup with the mixing knife and cup sleeve attached to the lid, and the juicer cup itself.

Operation Instructions

1. Cut the ingredients into chunks at about 1.5*1.5cm (0.6*0.6inch). If ingredients have kernels, are very hard, have thick skin, or a hard shell, please remove them first.
2. Fill the ingredients into the blend jar, then add some water or milk. Ensure the ingredients do not exceed the 'max' mark.
3. Screw the main engine onto the cup. The white light flashes once, indicating the main engine has been screwed in place. [arrow]
4. Double-press the blender button. The white light turns on, and the machine starts blending. The light turns off when finished. [arrow]
5. Turn the product upside down and shake it lightly for better mixing. [arrow]
6. After blending, the product will automatically enter the standby state. Pull out the silica gel to drink, or insert a straw to drink directly.

Notice: When the product cannot be started and the indicator light flashes red, the product is out of power. Insert the USB cable into the charging port (applicable to various 5V power supplies). When the product is fully charged, the white indicator light is always on.

Diagram Descriptions:

• Step 1: Shows ingredients being cut on a cutting board.
• Step 2: Shows ingredients and liquid being poured into the blender cup.
• Step 3: Shows the blender base being screwed onto the cup, with an indicator light.
• Step 4: Shows the blender button being double-pressed.
• Step 5: Shows the blender being turned upside down and shaken.
• Step 6: Shows the lid with a straw inserted, ready for drinking.
• Step 7: Shows the blender cup with the lid and straw, indicating drinking.

Cleaning

1. Pour water into the juice cup, assemble the main body to the cup, and start the machine. The water flow from stirring will automatically clean the unit.
2. After the machine stops, pour out the water in the cup to complete the cleaning. If there is any residue, it can be rinsed with water.
3. Do not use a dishwasher for cleaning, as it will cause the machine to deform and not work. ❌ [dishwasher]

Diagram Descriptions:

• Diagram 1: Shows water being poured into the juice cup.
• Diagram 2: Shows the assembled blender unit.
• Diagram 3: Shows the blender unit being tilted, possibly for rinsing.
• Diagram 4: Shows a kitchen sink with a red cross over spray nozzles, indicating a prohibition against using certain cleaning methods (likely high-pressure spray or dishwasher).

Technical Support

UK Importer: PHONINES LTD

Address: 3RD FLOOR, 21 HILL STREET, HAVERFORDWEST, SA61 1QQ

Manufacturer: Foshan speedfrog electronic technology Co.,Ltd

Address: #203B of 2nd floor, East building, Phase2 GIDC, North 1 Sanle Road, Beijiao Town, ShundeDistrict, Foshan City, Guangdong Province

UK Representative: Sea&Mew Accounting Ltd

Address: Electric Avenue Vision 25, London, Enfield EN3 7GD

Contact Person: Billy Han

E-mail: info@seamew.net

Follow Us: [Facebook] [Instagram] [Twitter] [TikTok] [Pinterest] [YouTube]

Search: elechelfclub

Certifications: [UK CA] [RoHS] [CE] [FC]

Origin: Made in China