Starlink Mini Setup Guide

What's In The Box

The Starlink Mini Kit includes:

• Starlink with Integrated WiFi
• Kickstand
• Pipe Adapter
• DC Power Cable (15 m / 49.2 ft)
• Power Supply
• Starlink Plug

Install

1. Download the Starlink App

   Download the Starlink App and scan the QR code to step through the install process. Visit setup.starlink.com.

   The app provides guidance and tools, including an obstruction checker, to help you find the best location for your Starlink.

2. Find a Clear View of Sky and Check for Obstructions

   Your Starlink needs an unobstructed view of the sky to maintain a stable connection with satellites. Objects like tree branches, poles, or roofs can interfere with the signal, causing service interruptions.

   Obstruction Guidelines:

   • Ensure a clear view within a 110° cone, with a 20° elevation from the horizon.
     [Clear view symbol] Indicates a suitable location.
     [Obstruction symbol] Indicates an unsuitable location.

   If a clear view cannot be found at ground level, consider elevated mounting options such as a roof, pole, or wall. Additional mounts and accessories are available for purchase on the Starlink Shop.

3. Plug in Starlink

   Lift the kickstand and plug one end of the provided cable into your Starlink. Ensure the plug is fully inserted and flush with the surface.

   Route the other end of the power cable to your power supply and plug it into a power outlet.

4. Connect to WiFi

   1. On your device, find and connect to the STARLINK network in your WiFi settings.
   2. You are now connected! Open the Starlink App to customize additional settings, check your connection, and more.

5. Align Starlink

   An alert in the App will notify you if your Starlink needs to be rotated for proper alignment. Tap the alert to use the alignment tool.

Can't Get Online?

1. Open the Starlink App to check for any alerts, outages, or obstructions.
2. Check the status light on the back of your Starlink:
   • Slow Blinking: Powered on.
   • No Light: No power to Starlink.
   • Fast Blinking: The LED will blink quickly for 3 seconds while holding down the reset button, then the LED will turn off as your Starlink reboots.
3. Make sure all connections are secure and there is no damage to hardware or cables.
4. Power cycle your Starlink by unplugging the power cord and then plugging it back in.
5. Factory reset the Starlink: Locate the reset icon on the back. Press and hold the button firmly until you hear a click, then hold for 3 seconds. The LED will blink quickly and shut off when complete.
6. If these steps do not resolve the issue, contact Starlink Customer Support via the app or the Support section of support.starlink.com.

Ethernet Port

Using the RJ45 Port

1. Remove the Starlink Plug.
2. Plug in the Mini Starlink Cable (available on shop.starlink.com) or your own Ethernet cable into the port. Connect the other end of your cable to your wired network or third-party hardware.

Note: This product is no longer rated IP67 when using a standard RJ45 cable.

Pipe Adapter Install

1. Remove Kickstand

   Squeeze the release tab and pull it away from its fixed location.

2. Route Cable Through Pipe Adapter and Plug In Cable

   Route the Starlink cable through the opening in the pipe adapter and out the front end. Plug the cable into your Starlink, ensuring the plug is fully inserted and flush with the surface.

3. Install Pipe Adapter

   Slide the mount into your Starlink until it clicks into place.

4. Mount Starlink to Pipe

   Loosen the locking thumbscrew and slide the Pipe Adapter onto your mounting pipe. Temporarily tighten the thumbscrew to stabilize Starlink onto the pipe.

   Connect the other end of the Starlink cable to the power supply and plug it into a power outlet.

5. Align Your Starlink

   An alert in the App will show if you need to rotate Starlink for proper alignment. Click the alert to use the alignment tool.

6. Lock Alignment

   Tighten the thumbscrew on the Pipe Adapter Mount to lock your Starlink in place. Ensure your Starlink is firmly attached.