SPEEDLINK GRAVITY CARBON RGB 2.1 Subwoofer System User Guide

Get Started

This section provides instructions for setting up and operating the SPEEDLINK GRAVITY CARBON RGB 2.1 Subwoofer System.

Diagram Description: The system consists of a main subwoofer unit and two satellite speakers. The subwoofer unit features controls and connection ports. Key indicators and controls on the front of the subwoofer include: [Power LED], [BT Button] (for Bluetooth and Input mode switching), [Eco Button] (for Auto Standby mode), [Bass Control] knob, and an [Audio Input Port] for wired connections. The rear of the subwoofer has [Sound Output Ports] for connecting the satellite speakers and a power input. The text associated with the satellite output ports states: "The USB ports are strictly for connecting the included satellites." (Note: This likely refers to the dedicated satellite output ports, not standard USB ports).

Switching Connection:

• Press the [BT Button] once to switch to audio input mode. The [Power LED] will be lit permanently. You can now transmit the audio signal via the audio cable to the SPEEDLINK GRAVITY RGB.
• Press the [BT Button] again to switch back to Bluetooth mode. The [Power LED] starts blinking.

Colour Modes:

You can cycle through the following LED color modes by pressing the [LED Button] repetitively:

• 1. RUNNING
• 2. MULTICOLOUR STATIC
• 3. BREATHING
• 4. SINGLE COLOUR STATIC
• 5. WITH THE BEAT
• 6. OFF

Notes on Colour Modes:

• 'Single Colour Static' mode is achieved by selecting a color in 'Breathing' mode and then pressing the switch. The chosen color remains until the switch is pressed again.
• 'Multicolour Static' mode is derived from the 'Running' mode.
• 'With the Beat' mode creates effects that match the currently played music. It functions only when music is playing (not paused or stopped). The higher the volume on the output device, the faster the effects will shine.

Bluetooth* Pairing:

1. Activate Bluetooth mode on your device.
2. Press and hold the [BT Button] for approximately 5 seconds to activate pairing mode. The [Power LED] blinks fast.
3. Open the Bluetooth menu on your smartphone, tablet, or other Bluetooth-capable device and scan for new devices.
4. Pair your device with 'SPEEDLINK GRAVITY RGB'.
5. The connection will be established. The [Power LED] blinks slowly.
6. The connection between devices will automatically re-establish when Bluetooth is reactivated on both the SPEEDLINK GRAVITY RGB and your paired device.

Auto Standby Mode:

• The auto standby mode is activated by default. The [Power LED] is lit in purple.
• The speakers enter standby mode after 1 hour of inactivity (no signal received).
• To switch off auto standby mode, press the [Eco Button] once. The [Power LED] will turn blue.
• To switch auto standby mode back on, press the [Eco Button] again. The [Power LED] will turn purple.

Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

Please note that failure to observe these instructions can cause product damage, explosion, fire, and/or electric shocks!

• Only use the devices as indicated in the user guide. Do not open or repair them.
• Before use, ensure that all devices and cables used are compatible. Incompatible devices can cause damage or danger.
• Do not expose the devices to liquids, heat, or extreme cold.
• Do not use the devices in a damp environment. Clean the devices with a dry cloth.
• Keep the devices and all loose parts away from children, pets, and unauthorized persons.
• Only use the devices with the appropriate provided accessories/cables.
• Disconnect cables from the devices if they will not be used for a long time. When disconnecting cables, pull by the plug, not the cord.
• Do not use cables in any way other than mentioned in the user guide; do not bend, cut, extend, knot, or step on them.
• Do not insert any foreign objects into the openings of the devices.
• Check connections for cleanliness and foreign objects before each use. Contamination can lead to poor performance, overheating, or electric shock.
• If the devices are damaged in any way or get too hot, stop using them immediately.
• Take caution when using devices that emit radio signals if you have a pacemaker or are dependent on other sensitive electronic life aids.

Safety instructions in further languages are available at: www.speedlink.com

Warning Symbols and Markings:

• [Warning: Hearing Damage] Further information: www.speedlink.com
• [Warning: Indoor Use Only] Device may only be used in dry rooms.
• [Protection Class II] Insulated housing (protection class II).

Conformity Notice

Operation of the device may be affected by strong static, electrical, or high-frequency fields (e.g., radio installations, mobile telephones, microwaves, electrostatic discharges). If this occurs, try increasing the distance from the devices causing the interference.

Conformity notices in further languages are available at: www.speedlink.com

Trademarks and Legal Information

All rights reserved. Speedlink, the Speedlink word mark, and the Speedlink swoosh are registered trademarks of Kolibri Beteiligungsgesellschaft mbH & Co. KGaA.

*Bluetooth is a registered trademark owned by Bluetooth SIG, Inc. The Instagram logo is a registered trademark/service mark of Instagram LLC. The Facebook logo is a registered trademark of Facebook Inc. The TikTok logo is a registered trademark of ByteDance.

All trademarks are the property of their respective owners. Technical specifications are subject to change. Information contained herein is subject to change without prior notice. Zeitfracht Medien GmbH shall not be made liable for any errors that may appear. Please keep this information for later reference.