HOMCOM 831-269 Mirror Assembly Instructions

Parts Included

• Part A: Mirror (1 PC)
• Part D: Keys (2 PC)
• Part E: Double sided tape (1 PC)
• Part F: Over the door hooks (2 PCS)
• Part G: Pads/Buffers (4 PCS)
• Part H: Screws (4 PCS)
• Part I: Wall screws/anchors (2 PCS)
• Part J: Wall screw caps/covers (2 PCS)

Tools Required (Not included): Drill ड्रिल, Hammer ?, Screwdriver ?.

Over the Door Mounting

This section details how to mount the mirror over a door.

Step 1: Attach the 'Over the door hooks' (Part F) to the mirror frame (A). The diagram shows two hooks (F) being attached to the top of the mirror frame.

Step 2: Secure the hooks using screws (Part H). The diagram shows screws (H) being used to attach the hooks to the mirror frame.

Step 3: Apply 'Double sided tape' (Part E) to the back of the mirror or frame for added stability.

Step 4: Hang the mirror over the door. The diagram shows the mirror (A) with attached hooks (F) being hung on a door. The text "Fixed on the door to prevent swaying" indicates the purpose of the tape or additional securing points.

Step 5: Use the keys (Part D) to secure the mirror. The diagram shows keys (D) being inserted into a lock mechanism on the door, likely to prevent the mirror from being lifted off the hooks or to secure it further.

Wall Mounting

This section details how to mount the mirror on a wall.

Step 1: Prepare the wall. The diagram shows a drill ड्रिल being used to make a hole in the wall. Text indicates: "Drill the hole after measuring and marking position".

Step 2: Insert wall anchors. The diagram shows a wall anchor (Part I) being hammered ? into the drilled hole.

Step 3: Attach the mirror to the wall. The diagram shows the mirror (A) with the back facing outwards. It illustrates attaching it using screws (Part I) that go through the mirror's mounting points and into the wall anchors.

Step 4: Secure the screws. A screwdriver ? is shown being used to tighten the screws (Part I) into the wall anchors.

Step 5: Cover the screw heads. The diagram shows screw caps/covers (Part J) being placed over the screws (Part I) for a finished look.

Step 6: Apply 'Double sided tape' (Part E) to the back of the mirror or frame for added stability. The text "Fixed on the door to prevent swaying" is present, which might be a slight carry-over from the previous section, but the context here is wall mounting.