VIMLE 2-Seat Section Assembly Instructions
IKEA Design and Quality
Important Information
Please read these instructions carefully before beginning assembly. Ensure you have all parts and tools required. Two people are recommended for assembly.
Safety Precautions:
- Do not use power tools unless specifically instructed.
- Assemble on a soft surface, like a carpet, to avoid scratching the parts.
- Keep small parts away from children.
Parts Included
The following parts are included in the package:
- 4x Screws (Part No. 10047226)
- 4x Fasteners (Part No. 194377)
Visual Description: The package contains two types of hardware: long threaded screws and specialized fasteners with a locking mechanism.
Assembly Steps
Step 1: Attach Frame Components
Take the main frame sections. Align the pre-drilled holes and insert four screws (10047226) into the designated points. Tighten the screws securely using a screwdriver. Ensure the frame is stable.
Visual Description: This step shows two parts of the sofa frame being joined together. Screws are being inserted into holes on the side of one frame piece and into the corresponding holes on the other. An inset diagram shows a close-up of a screw being tightened with a screwdriver, indicated by a circular arrow.
Step 2: Install Backrest Support
Place the backrest support structure onto the assembled frame. The structure has a series of interlocking loops. Align the bottom edge of the backrest support with the corresponding slots on the main frame. Gently push down until it clicks into place.
Visual Description: The backrest support, which appears to be a metal grid with many wavy loops, is being lowered onto the base frame. An arrow indicates the direction of placement. The base frame has corresponding slots where the backrest support will connect.
Step 3: Secure Backrest Support
Insert the specialized fasteners (194377) into the designated holes on the underside of the frame, connecting it to the backrest support. Turn the fasteners clockwise to lock the backrest support in place. You will hear a click when it is securely fastened.
Visual Description: This step shows the specialized fasteners being inserted into holes from the bottom of the frame. An inset diagram shows a close-up of the fastener being turned with a screwdriver. The fastener has a mechanism that engages with the backrest support, securing it. The final inset shows the fastener fully engaged and locked.
Final Check
Ensure all screws and fasteners are tightened correctly and the VIMLE 2-seat section is stable and secure before use.