Hamron Traffic Mirror 012112

Product Description

The Hamron Traffic Mirror (model 012112) is designed to enhance safety at intersections, exits from parking lots, and garages. It features an aluminum-reinforced screen and an adjustable post bracket suitable for posts with a diameter of 50-85 mm. The mirror provides a wide-angle view (160°) and is constructed from durable polycarbonate.

Technical Data

• Size: Ø 60 cm
• Wide Angle: 160°
• Mirror Material: Polycarbonate
• Bracket: Adjustable

Symbols Key

• [Instructions Symbol]: Read the user instructions.
• CE: Approved in accordance with relevant directives and regulations.
• [Recycling Symbol]: Recycle discarded products in accordance with local regulations.

Assembly Instructions

NOTE: The mirror surface is covered with a protective film. Do not remove this film until the installation is fully completed and checked.

1. Screw the right and left parts of the mirror bracket onto the back of the mirror, ensuring the slot is facing downwards. [See Figure 1]
2. Loosely fit the bracket halves around the post using M8 screws. Adjust to the desired position and then tighten the screws. [See Figure 2]
3. Fit the mirror bracket loosely onto the bracket using M8 screws. Adjust the mirror's angle and position, then tighten the screws. [See Figure 3]

Maintenance

• Clean the product regularly with a soft cloth moistened with water, and then wipe dry with a soft cloth.
• Carefully clean the polycarbonate mirror surface with water and allow it to air dry.

IMPORTANT: Do not use solvents, strong, corrosive, or abrasive detergents, or abrasive or scratching tools for cleaning, as this may damage the product and impair its functionality.

Environmental Care

Dispose of the product responsibly. Recycle discarded products according to applicable local regulations.

Manufacturer Information

JULA AB, BOX 363, SE-532 24 SKARA