Alphacool Eisbaer CPU Cooler

Alphacool Eisbaer Series

The Alphacool Eisbaer is a high-performance CPU cooler designed for efficient thermal management. This guide covers its features, compatibility, and installation.

Socket Compatibility

Intel Sockets: 775, 1156, 1155, 1150, 1151, 1366, 2011, 2011-3, 2066, 604, 771

AMD Sockets: 754, 939, AM2, AM2+, AM3, AM3+, AM4 [RYZEN], FM1, FM2, FM2+, 940, C32, G34

Note: A mounting kit for 2011-3 Narrow ILM is available separately (EAN: 4250197125314).

Available Models:

• Eisbaer 420
• Eisbaer 280
• Eisbaer 360
• Eisbaer 240
• Eisbaer 140
• Eisbaer 120

Safety First: ⚠️ Read the safety instructions before starting the installation.

Mounting Material

The package includes the following components for installation:

• AMD screws
• Intel 2011 / 2011-3 screws
• Intel 775 / 1156 / 1155 / 1150 / 1151 / 1366 / 604 / 771 screws
• Springs
• Washers (0.8 mm)
• Washers (2.0 mm)
• Nuts
• PWM-adapter (version varies by product)
• Intel backplate
• Thermal grease (e.g., GELID GC-Extreme)
• Radiator screws (number varies by product)
• AMD bracket
• Intel bracket

Functionality and Technology

Cooler Base

The cooler base is equipped with very fine cooling fins to ensure optimal cooling performance. The reservoir, containing the DC-LT 2600 Ultra Low Noise ceramic pump, is situated directly above the base. An accessible opening on the top allows for easy system cleaning, refilling, and expansion.

Technical Specifications (DC-LT Pump):

• Power consumption: 2.04W
• Operating voltage: 7 - 13.5V
• Flow rate: max. 60 L/h
• Pressure head at 12V: 0.80m

Full-Copper Radiator

The radiator utilizes copper in all critical areas, including the front chamber, cooling fins, and channels. This design significantly enhances cooling performance to a superior level, a fact confirmed by numerous tests from independent media.

Quick Release Fitting

The hoses are protected by anti-kink springs to prevent bending and potential blockage of water flow. The nylon safety quick-locking closure offers a simple and rapid method for expanding the cooling loop, providing maximum flexibility.

Eiswind Fans

The Eiswind fans are specifically engineered to meet radiator requirements and are controllable via a PWM connection. An included cable allows for simultaneous control of all fans through a single connection, enabling precise adjustment to meet specific needs.

Installation Guide Overview

Follow the specific instructions based on your CPU socket type:

• Intel Sockets (775, 1156, 1155, 1150, 1151, 1366, 604, 771): See pages 10-11
• Intel Sockets (2011, 2011-3, 2066): See pages 12-13
• AMD Sockets (754, 939, AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+, 940, C32, G34): See pages 14-15
• AMD AM4 [RYZEN] Sockets: See pages 16-17

Screw Mounting (Intel)

For Intel Sockets (775, 1156, 1155, 1150, 1151, 1366, 604, 771):

1. Select the appropriate bracket and screws.
2. Assemble the bracket components.
3. Place compression springs and washers onto the screws, then attach to the bracket using nuts.

Visual Description: Shows an Intel mounting bracket assembly with screws, springs, and washers being attached to the cooler base. A screw (M4, M3, 7.5mm length) is depicted.

CPU Mounting (Intel)

For Intel Sockets:

3. Apply thermal grease to the CPU surface, ensuring a thin layer (less than 0.5mm thickness).
4. Mount the cooler onto the CPU socket, utilizing the included backplate. Hand-tighten the screws in a crosswise pattern.

Visual Description: Illustrates the application of thermal grease to a CPU and the subsequent mounting of the cooler onto the socket with screws. A caution symbol (?) is shown, indicating careful handling.

Screw Mounting (Intel 2011 / 2011-3 / 2066)

For Intel Sockets (2011, 2011-3, 2066):

1. Select the appropriate bracket and screws.
2. Assemble the bracket components.
3. Place compression springs and washers onto the screws, then attach to the bracket using nuts.

Visual Description: Depicts the mounting process for Intel 2011 sockets, showing screws (M4) and associated hardware.

CPU Mounting (Intel 2011 / 2011-3 / 2066)

For Intel Sockets:

3. Apply thermal grease to the CPU surface, ensuring a thin layer (less than 0.5mm thickness).
4. Mount the cooler onto the CPU socket. Hand-tighten the screws in a crosswise pattern.

Visual Description: Shows the thermal grease application and cooler installation for Intel 2011 sockets. A caution symbol (?) is displayed.

Screw Mounting (AMD)

For AMD Sockets (754, 939, AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+, 940, C32, G34):

1. Select the appropriate bracket and screws.
2. Assemble the bracket components.
3. Place compression springs and washers onto the screws, then attach to the bracket using nuts.

Visual Description: Illustrates the mounting procedure for AMD sockets, featuring screws (M4 UNC 6-32, 10.5mm length) and mounting hardware.

CPU Mounting (AMD)

For AMD Sockets:

3. Apply thermal grease to the CPU surface, ensuring a thin layer (less than 0.5mm thickness).
4. Mount the cooler onto the CPU socket using the motherboard's backplate. Hand-tighten the screws in a crosswise pattern.

Visual Description: Shows the application of thermal grease and the cooler mounting process for AMD CPUs. A caution symbol (?) is present.

Screw Mounting (AMD AM4 RYZEN)

For AMD AM4 [RYZEN] Sockets:

1. Select the appropriate bracket and screws.
2. Assemble the bracket components.
3. Place compression springs and two different washers (0.8mm and 2.0mm) onto the screws, then attach to the mount using nuts.

Visual Description: Depicts the mounting process for AMD AM4 sockets, including screws (M4 UNC 6-32, 10.5mm length) and two types of washers.

CPU Mounting (AMD AM4 RYZEN)

For AMD AM4 [RYZEN] Sockets:

3. Apply thermal grease to the CPU surface, ensuring a thin layer (less than 0.5mm thickness).
4. Mount the cooler onto the CPU socket using the motherboard's backplate. Hand-tighten the screws in a crosswise pattern.

Visual Description: Shows the thermal grease application and cooler installation for AMD AM4 CPUs. A caution symbol (?) is displayed.

Radiator Mounting

Follow these steps for mounting the radiator:

1. Choose a suitable location within your PC case.
2. Mount the radiator using M3 screws.
3. Fan orientation can be customized. It is recommended to position fans to exhaust air from the case. For Push&Pull configurations, ensure all fans are oriented in the same direction. (Refer to "Radiator Placement Tips" on page 14).

Visual Description: Illustrates radiator and fan installation within a PC case, with arrows indicating airflow direction for intake and exhaust setups.

Connecting Fans & Pump

Instructions:

1. Connect the fans to the PWM adapter.
2. Connect the fan and pump to the mainboard.

Visual Description: Shows the PWM fan adapter connecting multiple fans, and the pump unit connecting to the mainboard headers.

Expanding with Eiswolf AiO

Instructions for expansion:

1. Switch off the PC.
2. Loosen the quick release connector (caution: 1-2 drops of water may leak).
3. Insert the graphics card with the Eiswolf cooler attached.
4. Connect the Eisbaer outlet (red connector) to the Eiswolf inlet (blue connector).
5. Connect the radiators to create a closed cooling loop.

Important Note: Always connect red quick release parts with blue quick release parts.

Further Expansion Possibilities:

• Eisbaer Ready Radiators (pre-filled)
• Standard GPX Cooler with Eisbaer Extension Set or Quick-Connect Extension Kit

Visual Description: Depicts an expanded cooling system configuration, including a graphics card cooler and additional radiators connected via the quick release fittings.

Radiator Placement Tips

This section provides guidance on optimal radiator placement within a PC case for effective airflow management. The diagrams illustrate various configurations:

• Configuration 1: Radiator at the front, fans set for intake (pushing air into the case).
• Configuration 2: Radiator at the front, fans set for exhaust (pulling air out of the case).
• Configuration 3: Radiator at the top, fans set for intake (pushing air into the case).
• Configuration 4: Radiator at the top, fans set for exhaust (pulling air out of the case).

Arrows indicate airflow direction, distinguishing between hot and cool air.

Imprint

Alphacool International GmbH

Marienberger Str. 1
38122 Braunschweig

Head Office: +49 (0) 531 28874 - 0

Fax: +49 (0) 531 28874 - 22

E-Mail: info@alphacool.com

General Manager: Fabian Noelte

WEEE Registration Number: DE 54464644

Trade Register: Amtsgericht Braunschweig HRB 202390

VAT ID Number: DE27058421

Tax Number: 13/207/02047