TADAR Cookie Mold: Safety and Usage Instructions
Product Description
This product is designed for preparing cookies/desserts by deep-frying at home. It is not a toy.
1. Instructions for Use
- Before first use, wash all parts thoroughly in warm water with mild detergent and dry.
- Heat oil to 180°C. Dip the metal tip of the mold into the batter, then immerse in hot oil.
- When the batter browns, carefully remove it from the mold (careful - hot!) and place on paper towels to drain excess oil.
Cleaning
Hand wash only. Do not use abrasive sponges or corrosive agents. Dry all parts thoroughly before storage.
2. Safety Rules
During use:
- Keep out of reach of children – do not leave unattended. Disabled and elderly persons only with supervision or with kitchen gloves.
- Do not touch hot metal parts during or immediately after frying.
- Avoid contact of water with hot oil. Do not overheat oil – risk of fire.
During frying:
- Be cautious of hot oil – keep a safe distance.
- Avoid water contact with hot oil – risk of splattering.
- Do not overheat oil – fire hazard.
3. Storage and Maintenance
- Store in a dry, ventilated place.
- Regularly check product condition (no cracks, deformations, loose handles).
- Stop use if damaged.
- Before use: read the instructions and keep them during the entire period of use. If passing product to others, include instructions.
- Proper use: use product only as intended.
Reporting Issues
In case of problems — stop use immediately if any irregularities occur. For injuries consult a doctor. Report issues to manufacturer or seller:
Phone: 61 8952300
E-mail: tadar@tadar.pl
Provide batch or serial number and problem description.
Limitations
Product is not suitable for storing chemicals or non-food materials.
Maintenance
Use according to manufacturer's instructions and maintain regularly to extend product life.
Warning!
Foil and packaging are not toys. Keep out of reach of children and disabled persons to avoid suffocation risk.
Manufacturer Information
PRODUCENT: TADAR spółka z ograniczoną odpowiedzialnością sp. k.
Jasin | ul. Poznańska 53 | 62-020 Swarzędz | tel.: +48 61 84 65 111
www.tadar.com.pl | tadar@tadar.pl