Moen Smyth™ Single-Handle High Arc Pulldown Kitchen Faucet
Model: 7770 Series
Specifications
Description
- Reflex™ pulldown system offers smoother operation, easy movement, and secure docking.
- PowerBoost™ technology provides boosted water performance with the push of a button.
- Duralock™ quick connect installation.
- Metal construction with various finishes identified by suffix.
- Pulldown spray with 68" braided hose.
- High arc spout provides height and reach to fill or clean large pots, while the pulldown wand provides maneuverability for cleaning or rinsing.
- 360° rotating spout.
- Flexible supply lines with 3/8" compression fittings.
Operation
- Lever style handle.
- Four function spray wand: stream, spray, boosted stream, and boosted spray.
- Operates with less than 5 lbs. of force.
- Operates in stream or spray mode in the pulldown or retracted position.
- Temperature controlled by 100° arc of handle travel.
Flow
Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi.
Cartridge
- 1255™ Duralast™ cartridge for Single-Handle Faucets.
- Engineered polymers, non-ferrous, and stainless steel materials.
Standards & Compliance
- Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1, and all applicable requirements referenced therein, including NSF 61/9 & 372.
- Meets CalGreen and Georgia SB370 requirements.
- Complies with California Proposition 65 and the Federal Safe Drinking Water Act.
- ADA compliant for lever handle.
- The backflow protection system consists of two independently operating check valves, a primary and a secondary, which prevent backflow.
Warranty
- Lifetime limited warranty against leaks, drips, and finish defects to the original homeowner.
- 10-year limited warranty when used in a multifamily installation.
- 5-year limited warranty when used in a commercial installation.
Visit www.moen.com/support for complete details and limitations.
Critical Dimensions
Note: This faucet is designed to be installed through 1 or 3 holes, 1-1/2" (38mm) MIN. DIA.
- Overall Height: 16-9/16" (421mm)
- Spout Height (from mounting surface): 9-5/8" (245mm)
- Spout Reach (from faucet base center to spout tip): 8-3/4" (223mm)
- Handle Height (from mounting surface): 4-1/2" (115mm)
- Handle Width: 3-1/2" (89mm)
- Base Diameter: 2-1/2" (64mm)
- Mounting Hole Diameter: Minimum 1-1/2" (38mm)
- Nozzle Diameter: 7/8" (23mm)
- Clearance from spout base to handle: 3-1/8" (105mm)
- Clearance from spout base to faucet body: 3-1/2" (89mm)
- Overall Width at base: 2-1/2" (64mm)