7864sp

Read instructions >

MOEN 7864 SLEEK ONE-HANDLE PULLDOWN KITCHEN FAUCET, CHROME

Specification Sheet

Moen 7864ORB Sleek Single Handle Pre-Rinse Spring Pull-down Kitchen Faucet, Oil Rubbed Bronze

Moen 7864 Sleek Single Handle Pulldown Kitchen Faucet, Chrome

PDF preview unavailable. Download the PDF instead.

671731 dsp0GR
Specifications

DESCRIPTION
· ReflexTM pulldown system offers smoother operation, easy movement and secure docking · PowerCleanTM Spray Technology · DuralockTM quick connect installation · Metal construction with various finishes identified by suffix · Pulldown spray with 68" braided hose · High arc spout provides height and reach to fill or clean large pots while pullout wand
provides the maneuverability for cleaning or rinsing · 360o rotating spout · Flexible supply lines with 3/8" compression fittings
OPERATION
· Lever style handle · Operates with less than 5 lbs. of force · Operates in stream or spray mode in the pulldown or retracted position · Temperature controlled by 100o arc of handle travel
FLOW
· Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
· 1255TM DuralastTM cartridge for Single-Handle Faucets · Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
· Third party certified to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all applicable requirements referenced therein including NSF 61/9 & 372
· Meets CalGreen and Georgia SB370 requirements · Complies with California Proposition 65 and with the Federal Safe Drinking Water Act · ADA for lever handle · The backflow protection system in this device consists of two independently operating
check valves, a primary and a secondary which prevent backflow
WARRANTY
· Lifetime limited warranty against leaks, drips and finish defects to the original homeowner · 10 year limited warranty when used in a multifamily installation · 5 year limited warranty when used in a commercial installation Visit www.moen.com/support for complete details and limitations
8-1/2" (21.5cm)

SleekTM
Single-Handle High Arc Pulldown Kitchen Faucet
Models: 7864 series
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH 1 OR 3 HOLES, 1-1/2" (38mm) MIN. DIA.

15-9/16" (39.5cm)
3" (7.6cm) 10-3/8" (26.3cm)
5/19

4-7/16" (11.3cm)
2-13/16" (7.1cm) 5-3/4"
(14.6cm)

8-5/16" (21.1cm)

7-5/8" (19.4cm)
3-1/2" (8.9cm)
2-5/16" (5.9cm)

7/8" (2.2cm)

CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN www.moen.com


SEAL Systems - PDF Tools 3.3.1.2 Adobe InDesign 14.0 (Windows)