Midea Water Dispenser
User Manual
Model: MJR001T
Warning notices: Before using this product, please read this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details. The diagram above is just for reference. Please take the appearance of the actual product as the standard.
Thank You Letter
Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.
Safety Instructions
Intended Use
The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. Please check the packaging and appliance on arrival to make sure everything is intact to ensure safe operation. If you find any damage, please contact the retailer or dealer. Please note modifications or alterations to the appliance are not allowed for your safety concern. Unintended use may cause hazards and loss of warranty claims.
Explanation of Symbols
- ⚠️ [Danger]
- This symbol indicates that there are dangers to the life and health of persons due to extremely flammable gas.
- ⚡ [Electrical Warning]
- This symbol indicates that there is a danger to life and health of persons due to voltage.
- ⚠️ [Warning]
- The signal word indicates a hazard with a medium level of risk which, if not avoided, may result in death or serious injury.
- ⚠️ [Caution]
- The signal word indicates a hazard with a low degree of risk which, if not avoided, may result in minor or moderate injury.
- ? [Attention]
- The signal word indicates important information (e.g. damage to property), but not danger.
- ⚙️ [Observe Instructions]
- This symbol indicates that a service technician should only operate and maintain this appliance in accordance with the operating instructions.
Read these operating instructions carefully and attentively before using/commissioning the unit and keep them in the immediate vicinity of the installation site or unit for later use!
DANGER: Risk of Fire/Flammable materials
- Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
- The appliance must be disconnected from the main power before use and before user-performable maintenance is carried out.
- The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. Please check the packaging and appliance on arrival to make sure everything is intact to ensure safe operation. If you find any damage, please contact the retailer or dealer. Please note modifications or alterations to the appliance are not allowed for your safety concern. Unintended use may cause hazards and loss of warranty claims.
CAUTION: Risk of injury!
Failure to comply with the safety information and instructions may result in injury.
Safety of children and persons with reduced abilities.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- This appliance is intended to be used in household and similar applications such as: staff kitchen areas in shops, offices and other working environments; farm houses and by clients in hotels, motels and other residential type environments; bed and breakfast type environments; catering and similar non-retail applications.
WARNING
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial use by lay persons.
- The appliance is suitable for indoor use only.
- WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
- WARNING: When positioning the appliance, ensure the supply cord is not trapped or damaged.
- WARNING: Do not locate multiple portable socket-outlets or portable power supplies at the rear of the appliance.
- The appliance must not be cleaned by a water jet.
- The appliance must not be immersed.
- This product is not recommended to use in areas above 1,500m altitude.
- This machine is applicable to the water environment with TDS value less than 150 in case of the high water hardness lead to incrustation even breakdown of the heater.
- In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
- It's normal when water flow shaking a little for air enter in especially in first use or working without water.
Specifications
| Product Model | MJR001T |
|---|---|
| Rated Voltage | 220-240V~ |
| Rated Frequency | 50/60Hz |
| Rated power | 2100W |
| Hot water capacity | 20L/h(≥90°C) |
| Capacity | 3.0L |
| Product size | 309x143×320mm |
This appliance should work under environment of temperature from 10°C-43 °C and humidity ≤ 90%.
Product Overview
Product Components
The water dispenser features a control panel, a water outlet, a light indicator, a water drain, a rotary button, a water tank cover, a scale label, and a water tank. It is powered by a cable.
- Control Panel: Contains controls for temperature selection.
- Rotary Button: Used to select temperature and unlock the safety lock.
- Water Outlet: Where the heated water is dispensed.
- Light Indicator: Provides visual feedback on the appliance's status.
- Water Drain: Located at the base for draining.
- Water Tank Cover: Covers the water tank.
- Water Tank: Holds the water, with MIN and MAX level markings.
- Scale Label: Indicates water level marks within the tank.
- Cable: For connecting to the power supply.
Accessories
- Instruction Manual x1
- Warranty Card x1
Product Installation
Getting Started
- Fill the water tank with fresh water between the MIN and MAX level markings. Ensure the water temperature is above 5°C.
- Plug the appliance into a main power outlet. All lights on the control panel will illuminate, and the room temperature indicator will light up normally.
Use only fresh water at room temperature without any additives, as this can damage the appliance. This appliance is not suitable for dishwashers.
Unlock the appliance and dispense water
Turn the rotary button to unlock the safety lock mode. The water dispense indicator light will illuminate when dispensing water. The appliance automatically enters safety lock mode after 60 seconds if no function is selected.
Operation Instructions
Operation Panel
The operation panel allows selection of water temperature. The rotary button controls temperature settings from warm water up to boiling water.
| Indicator No. | Indicator Name | Description |
|---|---|---|
| No.1 | Temp"-" Indicator Light | When this light is on, the water temperature knob button is in the warm water position, and the water from the faucet is at constant temperature. |
| No.2 | 45°C Indicator Light | When this light is on, the water temperature knob button is selected at the 45°C gear, and the water outlet from the faucet is at 45°C. |
| No.3 | 55°C Indicator Light | When this light is on, the water temperature knob button is selected at the 55°C gear, and the water outlet from the faucet is at 55°C. |
| No.4 | 65°C Indicator Light | When this light is on, the water temperature knob button is selected at the 65°C gear, and the water outlet from the faucet is at 65°C. |
| No.5 | 80°C Indicator Light | When this light is on, the water temperature knob button is selected at the 80°C gear, and the water outlet from the faucet is at 80°C. |
| No.6 | 90°C Indicator Light | When this light is on, the water temperature knob button is selected at the 90°C gear, and the water outlet from the faucet is at 90°C. |
| No.7 | Temp"+" Indicator Light | When this light is on, the water temperature knob button is selected in the boiling water position, and the water outlet from the faucet is boiling water. |
Dispensing Water
Turn the rotary button to select the desired temperature. The water dispense indicator light will illuminate when dispensing water.
To dispense water, tap the button. Water will flow continuously from the spout. Press the Confirm button to stop the appliance immediately. Repeat if more hot water is required.
Water Flow:
- Tap Once: 250ml Water
- Tap 1.5 Sec: 1000ml Water
Notice: The appliance may take approximately 7 seconds to resume regular temperature after being plugged in.
Cleaning and Maintenance
-
Clean the water tank and spout
To maintain performance, it is recommended to descale the appliance at least twice a month. Use a non-toxic detergent such as citric acid or vinegar in the tank. For the first use, suggest using 50g-100g citric acid with 2.5L water. Wait until the citric acid is completely dissolved. Tap the button to empty the water tank. After that, fill in 2.5L water and wait for 5 minutes. Empty the water tank again. Repeat two or three times to complete descaling. Drain boiled water and replace with clean water before operating the appliance again.
-
Refreshing the water
If the water has been in the tank for more than 48 hours, please refresh the water periodically.
-
Always disconnect the appliance from mains power when not in use
Turn the appliance off if you are not going to use it for a long time. Wait for at least 3 minutes for reheating the water while plugging in the water dispenser. Drain boiled water and replace with clean water before operating the appliance again.
-
Emptying the Water Drain
Remove the water tray by using one hand to stabilize the appliance and another to lift the water drain slightly and remove it. Empty the water drain and replace it with medium force. Clean up the water tray periodically to prevent germs and bacteria.
TIPS:
- Do not drink the cleaning water.
- Empty the water tank and pour out the water in the appliance while using citric acid to prevent it from entering the pipeline and causing product damage.
- For first usage: Fill 3L of fresh water into the water tank. Turn the button to select the desired temperature. Suggest turning the button from the highest level to the lowest level once in sequence, and then empty the water tank.
Troubleshooting
Please use this chart to troubleshoot common problems with the instant hot water dispenser.
| Problem | Possible Reason | Solution |
|---|---|---|
| Panel light does not shine |
|
|
| Panel does not work |
|
|
| Not Heating |
|
|
| All panel lights flash |
|
|
| The room temperature light flashes, the other lights off |
|
|
| Water flow becomes smaller |
|
|
| No water |
|
|
Trademarks, Copyrights and Legal Statement
The Midea logo, word marks, trade name, trade dress, and all versions thereof are valuable assets of Midea Group and/or its affiliates (“Midea”), to which Midea owns trademarks, copyrights, and other intellectual property rights, and all goodwill derived from using any part of an Midea trademark. Use of the Midea trademark for commercial purposes without the prior written consent of Midea may constitute trademark infringement or unfair competition in violation of relevant laws.
This manual is created by Midea, and Midea reserves all copyrights thereof. No entity or individual may use, duplicate, modify, distribute in whole or in part this manual, or bundle or sell with other products without the prior written consent of Midea.
All the described functions and instructions were up to date at the time of printing this manual. However, the actual product may vary due to improved functions and designs.
Disposal and Recycling
Important instructions for environment
Compliance with the WEEE Directive and Disposing of the Waste Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
?️ [WEEE Symbol] This symbol indicates that this product shall not be disposed of with other household wastes at the end of its service life. Used devices must be returned to an official collection point for recycling of electrical electronic devices. To find these collection systems, please contact your local authorities or the retailer where the product was purchased. Each household performs an important role in recovering and recycling old appliances. Appropriate disposal of used appliances helps prevent potential negative consequences for the environment and human health.
Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
Package information
Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
Data Protection Notice
For the provision of the services agreed with the customer, Midea agrees to comply without restriction with all stipulations of applicable data protection law, in line with agreed countries within which services to the customer will be delivered, as well as, where applicable, the EU General Data Protection Regulation (GDPR).
Generally, Midea's data processing is to fulfil its obligation under contract with you and for product safety reasons, to safeguard your rights in connection with warranty and product registration questions. In some cases, but only if appropriate data protection is ensured, personal data might be transferred to recipients located outside of the European Economic Area.
Further information is provided on request. You can contact Midea's Data Protection Officer via MideaDPO@midea.com. To exercise your rights, such as the right to object to your personal data being processed for direct marketing purposes, please contact us via MideaDPO@midea.com. To find further information, please follow the QR Code.
