Foxwell T2000 TPMS Tool Quick Start Guide

To Register Through Website

Visit www.foxwelltech.us.

1. On the website, press the Register icon or navigate to the registration page via Support.
2. Enter your email address as your user ID and click 'Send Code'.
3. Find the security code in your email, input it, create a password, and click 'Free Registration'.
4. Sign in to the Member Center, click 'New Registration', input the serial number, and click 'Submit' to activate the product. (Password is not required for serial number activation).

To find the serial number:

• On the back of the main unit.
• In the scanner's About page.

To Register Via Update Client

1. Visit www.foxwelltech.us, click 'Support', then 'Tools', and download the update client for your product.
2. Unzip the downloaded file, run the installer, and install the update client on your computer.
3. Launch the update client from the desktop icon and click the 'Register' icon to create a Foxwell ID.
4. Enter your email address and click 'Send Code'. A 4-digit verification code will be sent to your email.
5. Enter the received code, create a password, and click 'Free Registration' to complete.
6. Sign in to your Foxwell account, select 'Activation', input the serial number or click the 'Read' icon to read it from the scanner, and click 'Activate'. (Password is not required).

TPMS Service Tool Specifications

• Rated input: 8-18V DC
• Operating temperature: 0°C-60°C
• Storage temperature: -20°C-70°C

Certifications: CE FC

TPMS Sensor Activation

1. Highlight 'TPMS' from the main menu and select the vehicle model.
2. Select 'Trigger' from the available menu.
3. Place the tool near the correct position to ensure sensor activation and decoding.
4. Press 'Activate' to test the TPMS. If the test passes, TPMS data will be displayed for 3 seconds.

Battery Charging

The scanner has a built-in lithium-ion polymer rechargeable battery. It can be charged using any of the following sources:

• 12-volt wall plug
• USB connection to a personal computer

TPMS Sensor Programming

Manual Create

1. Highlight 'TPMS' from the main menu and select the vehicle model.
2. Select 'Programming' > 'Manual Create'.
3. Input the sensor ID in the dialog box and press 'Y' to continue.
4. Place a new Foxwell sensor near the TPMS tool (around 0-20 cm).
5. Press 'F3' to start programming when the tool detects the sensor.

Clone by Activation

1. Highlight 'TPMS' from the main menu and select the vehicle model.
2. Select 'Programming' > 'Clone by Activation'.
3. Place the tool near the original sensor to be copied and press 'Activate' to continue.
4. After successful triggering, press 'Y' to continue.
5. Place a new Foxwell sensor near the TPMS tool (around 0-20 cm).
6. Press 'F3' to start programming when the tool detects the sensor.

Automatic Create (1-16 sensors)

1. Highlight 'TPMS' from the main menu and select the vehicle model.
2. Select 'Programming' > 'Automatic Create'.
3. Place new Foxwell sensors (1-16) near the TPMS tool (around 0-20 cm).
4. Press 'F3' to start programming when the tool detects the sensors.

Clone by OBD

1. Highlight 'TPMS' from the main menu and select the vehicle model.
2. Select 'Programming' > 'Clone by OBD'.
3. Connect the TPMS tool to the vehicle via OBDII cable and turn the ignition on.
4. After reading ID information successfully, select the sensor ID to be copied and press 'Y' to continue.
5. Place a new Foxwell sensor near the TPMS tool (around 0-20 cm).
6. Press 'F3' to start programming when the tool detects the sensor.

Update

Before updating, ensure you are connected to the internet and have created a Foxwell ID.

1. Launch the update tool 'FoxAssist' by double-clicking the desktop icon and log in with your Foxwell ID and password.
2. Connect the scanner to the computer using the TF card reader or USB cable (TF card reader update is suggested).
3. Select 'Download'. All applicable updates will be displayed. Check the boxes for the desired software and click 'Upgrade' to begin.

Contact Us

For service and support, please contact Foxwell:

• Website: www.foxwelltech.us
• E-mail: support@foxwelltech.com
• Service Number: +86-755-26697229
• Fax: +86-755-26897226

Register your product at: http://www.foxwelltech.us/register.html