Foxwell T1000 TPMS Service Tool

Product Registration

To Register Through Website

1. Visit www.foxwelltech.us.
2. Press the Register icon or navigate to Support > Register.
3. Create an account: Enter your email address, create a password, and click [Send Code].
4. Check your email for the security code, input it, and complete registration.

To Register Via Update Client

1. Download the update client from www.foxwelltech.us (Support > Tools).
2. Unzip and install the update client on your computer.
3. Launch the update client using the desktop icon.
4. Click the [Register] icon to create a Foxwell ID.
5. Enter your email address and click [Send Code].
6. Find the security code in your email, input it, create a password, and click [Free Registration].

Product Activation

1. Sign in to your Foxwell account.
2. Select [New Registration] or [Activation].
3. Input the product's serial number (found on the back of the unit or in the scanner's About page) and click [Submit].

TPMS Sensor Activation

1. From the main menu, highlight TPMS and select the vehicle model.
2. Select [Trigger] from the available menu.
3. Place the tool near the TPMS sensor to ensure activation and decoding.
4. Press [Activate]. If successful, TPMS data will be displayed for approximately 3 seconds.

TPMS Sensor Programming

Manual Create

1. From the main menu, highlight TPMS and select the vehicle model.
2. Select Programming > [Manual Create].
3. Input the sensor ID in the dialog box and press Y to continue.
4. Place a new Foxwell sensor near the TPMS tool (0-20 cm).
5. Press Y to start programming when the tool detects the sensor.

Clone by Activation

1. From the main menu, highlight TPMS and select the vehicle model.
2. Select Programming > [Clone by Activation].
3. Place the tool near the original sensor to be copied and press [Activate].
4. After successful trigger, press Y to continue.

Automatic Create (1-16 sensors)

1. From the main menu, highlight TPMS and select the vehicle model.
2. Select Programming > [Automatic Create].
3. Place new Foxwell sensors (1-16) near the TPMS tool (0-20 cm).
4. Press Y to start programming when the tool detects the sensors.

Battery Charging

The scanner features a built-in lithium-ion polymer rechargeable battery. Charge the unit using any of the following sources:

• 12-volt wall plug
• USB connection to a personal computer

Software Update

Before updating, ensure you have an internet connection and a Foxwell ID.

1. Connect the scanner to your computer using the provided TF card reader or USB cable (TF card reader update is recommended).
2. Launch the FoxAssist update tool via its desktop icon and log in with your Foxwell ID and password.
3. Select [Download]. All applicable updates for your tool will be displayed.
4. Check the boxes next to the software you wish to update and click the [Upgrade] button.

Contact Us

For service and support:

• Website: www.foxwelltech.us
• E-mail: support@foxwelltech.com
• Service Number: +86-755-26697229
• Fax: +86-755-26897226

Register your product at: http://www.foxwelltech.us/register.html