JBL Grand Touring Series GTO 509C/GTO 609C
This document provides technical specifications and assembly information for the JBL Grand Touring Series GTO 509C and GTO 609C speakers. It also includes data for related models such as GTO 400C, GTO 500C, GTO 800C, and GTO 100C.
Technical Specifications
| SPECIFICATIONS | GTO 400C | GTO 500C | GTO 800C | GTO 100C |
| RL (Tm) | 0.600 | 0.700 | 0.9200 | 1.000 |
| GCR (mm/s) | 2.72 | 2.27 | 40.1 | 46.3 |
| Wm cp | 70.08 | 71.174 | 0.99 | 1.043 |
| RA (mm) | 106.73 | 66.33 | 0.473 | 1.049 |
| Cms (μm/h) | 0.307 | 0.203 | 0.413 | 0.740 |
Model Overview
The Grand Touring Series includes various models, indicated by their numerical designations, such as GTO 400C through GTO 7900C, and further models like GTO 7100C, GTO 7200C, etc. The specific capabilities and applications may vary across this range.
Assembly and Components
The following describes the assembly process and identifies key components using lettered diagrams:
- Diagram 1: Speaker Assembly Stages This diagram illustrates the sequential steps for assembling a speaker, showing the interaction of various parts labeled A through Q. It begins with initial component identification (B/N, C/O) and progresses through stages of connection and enclosure.
- Diagram 2: Component Identification This section details individual components with labels A through U. For example, components A, B, C, D, and E are shown as different types of speaker drivers. Components F through M represent various fasteners, wiring terminals, and mounting hardware, with quantities indicated (e.g., 2X, 6X, 8X, 1X). Component N appears to be a speaker grille.
- Diagram 3: Wiring and Installation This diagram shows the electrical connections and mounting of the speaker components, highlighting the use of terminals (F) and various fasteners (P). It demonstrates how the speaker is integrated into a system.
For detailed technical specifications and further product information, please refer to the official JBL documentation.
