Aoocci C6 Pro User Manual

Attention

Please read this manual carefully before use and keep it for future reference.

1. Check all accessories before installation. No returns are accepted after installation, but repairs or discounted returns may be possible.
2. Do not use a high-pressure water gun to clean the host and cameras. The product is only waterproof against rain.
3. Do not use alcohol, stain removal solutions, or other corrosive solvents to wipe the host and lens, as this may damage the product's appearance and waterproofness.
4. Ensure all units are connected before turning on the power.
5. Do not fold the cable lines during installation.

Special Attention:

6. Use a certified 8-256GB MICRO TF memory card with a CLASS 10 classification or above. Format the memory card before first use.
7. Long-term use of the memory card can cause fragmentation; regular formatting is recommended.
8. Press the rubber plugs firmly after inserting to ensure the product's waterproofness.

Explanation of Main Components

The Aoocci C6 Pro is a driving recorder system. The main unit features a touchscreen display. It includes two cameras (front and rear) and two tire pressure sensors (labeled 'F' and 'R').

Main Components:

• Host: The central unit with the display and processing capabilities.
• Front Camera: Captures video footage from the front.
• Rear Camera: Captures video footage from the rear.
• Tire Pressure Sensor: Monitors tire pressure for safety.
• Wrenches/Reverse Screws: Tools for installation and securing components.
• Power Line/USB Line: Cables for power supply and data transfer.
• Camera Line: Cables connecting the cameras to the host.
• Hood/Screws: Mounting hardware and protective covers.

Accessories Details:

The package includes a mounting bracket, various cables (USB test cable, camera connection cables, power cable), and a user manual. Additional accessories include camera accessories and tool sets, and controller accessories.

Installation and Connection

Description of Main Parts and Key Functions

The host unit features a GPS module for location tracking, a power indicator light, a video indicator light, a speaker, and a memory card slot/TYPE-C connector. It also has screw holes for attaching the hood and bracket module. The front and rear lenses capture video.

Connection Method

To connect the device, follow these steps using a multimeter:

1. Set the multimeter to DC mode. Connect the black probe to the negative battery pole and the red probe to the test line.
2. When the ACC (Accessory) is OFF, the multimeter should show no voltage. When the ACC is ON, the multimeter should display approximately 12V. This indicates you have found the ACC power line.
3. If the ACC line is not found, use the red probe to test various lines (keeping the black probe connected to the negative pole) until the ACC line is identified.

Note: The wiring diagram is scaled down; actual sizes may vary.

Interface and Settings

Main Menu Screen

The main menu screen displays the driving recorder status, time, date, and temperature. Key icons and functions include:

• ? Home
• ? Volume adjustment
• ? GPS
• ? G-sensor (Collision sensitivity)
• ▶️ Playback
• ⚙️ System settings
• ? Bluetooth settings
• ? WiFi
• ? Storage card status
• ? Camera angle

LED Indicator Light: Steady green light/flashing red light indicates normal power supply and no memory card. Steady green light means a memory card is present but not recording. Flashing green light indicates normal recording.

Navigation:

1. Press to select CarPlay or Android Auto to connect to a phone.
2. Select the motorcycle driving recorder function.
3. Playback: Access recorded videos.
4. Date time: Set or view date and time.
5. Tire pressure: View tire pressure status.

CarPlay & Android Auto Connection Instructions

To connect your smartphone:

1. Ensure your phone's Bluetooth and Wi-Fi are turned on.
2. On the dash cam's home page, click the "Interconnect" window.
3. Click the CarPlay or Android Auto icon and follow the on-screen prompts.

For the first connection, turn on your phone's Bluetooth and connect to the host's Bluetooth. Wait 5-10 seconds. If your phone's Wi-Fi is enabled, the Android Auto interface will transmit automatically. Press the home button to return to the dash cam's main interface.

Main Settings Screen Description

Access the main settings screen by clicking the settings icon (⚙️). Key settings include:

• ? Language: Select from multiple languages.
• ⏰ Time Setting: Set the host time. It updates automatically after connecting to GPS/Wi-Fi/Bluetooth.
• ? Phone audio: Enable/disable sound output through the host; when OFF, phone sound plays via the host.
• ? Key Volume: Enable/disable touch key tones.
• ? Wi-Fi switch: Turn Wi-Fi on/off. The connection distance is up to 10 meters without obstruction.
• ? Pressure: Pairing for tire pressure detection.
• ?️ Screen Saver: Set the auto-lock time for the screen.
• ? GPs info: Check GPS signal information.
• ? Format SD: Format the memory card.
• ? Reset: Reset the host to factory settings.
• ℹ️ Version: View firmware version, Bluetooth name, and Wi-Fi name/password.

Tire Pressure Detection Interface Explanation

Access tire pressure settings by clicking the pressure icon (?).

Settings include:

• Tyre unit: Select between Bar or Psi.
• Temperature unit: Select between °C or °F.
• Alarm values: Set LOW ALARM and HIGH ALARM thresholds for tire pressure.

Pairing Sensors:

1. Install the sensors onto the tire valves.
2. On the device, the FRO (Front Right Outer) tire pressure number will flash. Click to confirm pairing.
3. The BAC (Back Left Outer) tire pressure number will flash for the rear wheel. Click to confirm pairing.
4. Once paired, screw the reverse lug nuts back to secure the sensors.

If tire pressure is displayed inaccurately, check sensor installation and ensure the inflation tool's pressure unit matches the host's setting.

Driving Recorder Operation

Driving Recorder Interface

The driving recorder interface displays real-time information. Key elements include:

• ? Video recording indicator
• ?️ Recording button
• ↔️ Front and rear camera switch button
• ? GPS Signal status
• ? Rear camera with mirroring support
• ?️ Full screen mode
• ?️ Map selection (requires downloading map packages)
• ? Speed (KM/H)
• ⬆️ Current Altitude (m)
• ⬆️ Total Altitude (m)
• ? Accelerated speed (G)

Controls:

1. ? Homepage: Return to the previous page.
2. ⚙️ Settings: Enter the settings menu.
3. ▶️ Playback: Return to the playback interface.
4. ?️ Recording: Turn voice recording on/off.
5. ? Lock: Lock/unlock the current video recording.
6. ? Take a photo: Capture a still image from front and rear cameras simultaneously.
7. ? Video recording: Start/pause video recording.
8. ? Time/date: Display current time and date.
9. ⬆️ Altitude: Display current altitude.
10. ?️ Position: Display current GPS position.
11. ⏱️ Recording time: Show recording duration.
12. ? Speed: Display current speed.

Recorder Setup Menu Description

Access the recorder setup menu by clicking the settings button (⚙️) on the recorder interface.

• Resolution: Set video resolution.
• Loop: Set loop recording intervals (1/3/5 minutes).
• G-sensor: Configure collision sensitivity settings.
• Date: Enable/disable time watermark on videos.
• GPS switch: Enable/disable GPS signal reception.
• Recording: Configure video sound settings.
• GPS speed: Enable/disable GPS speed recording.
• Compass: Configure compass bearing display.
• GPS: Toggle GPS signal on/off.
• Back: Enable/disable rear lens mirror function.

Wi-Fi Connection and App Usage

Instructions for Wi-Fi Connection

Connect your smartphone to the dash cam's Wi-Fi for app control.

Android System Connection Procedure:

1. Turn on your phone's Wi-Fi and select the network name "MT91CXXX". Enter the password "12345678" to connect.
2. After successful connection, the Wi-Fi logo will change from white to green.
3. Some Android phones may prompt "no internet access in this network". Select "connect only this time" or "always connect". Note: The dash cam's Wi-Fi is for device-to-phone connection and app operation only, not for internet access.

iOS System Connection Procedure:

1. Go to iPhone Settings > Wi-Fi. Select the network "MT91C-16e4e4" and enter the password "12345678" to connect.
2. Open the KYCAM2 app. Press "Enter recorder". The dash cam may prompt for GPS location access; select "Allow when using app" and "Allow to connect to local network".

KYCAM2 App Usage

The KYCAM2 app allows control and access to recordings.

• My Camera: Add or manage connected cameras.
• Into Camera: Enter the main interface to view and set up the dash cam.
• Album: View downloaded videos and photos.
• More: Access settings for language, time, and offline maps.

App functions are subject to updates; refer to the app for the latest details.

Main Features and Troubleshooting

Main Features

Common Troubleshooting Solutions

1. How to disconnect CarPlay or Android Auto?
   Answer: Turn off the Wi-Fi or forget the Bluetooth device on your phone.
2. How to reconnect to CarPlay/Android Auto after manual disconnection?
   Answer: Reconnect to the dash cam via Bluetooth.
3. How to reconnect to CarPlay/Android Auto after restarting the dash cam?
   Answer: It will reconnect automatically when Bluetooth and Wi-Fi are both enabled.
4. How to use the App-Kycam2 when connected to CarPlay?
   Answer: Both can be operated simultaneously.

FCC Compliance

FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.