Find Your Card Page
This section describes how to locate your LOC8 Card using the Find My app.
Follow these steps:
- In the "Find My" app, tap "Items".
- Check your card's last known time and place.
- For distant items, click "Directions" to open Maps to the last-known location.
- To find a nearby item, tap "Play Sound" and listen for a chime.
- Click and select the card from the list.
Visual Description of App Interface: The screen shows a card interface with options like "Play Sound" (with a sound icon) and "Directions" (with a map icon). There's also an 'X' icon to close the card view.
Set Up Page
This section guides you through setting up your LOC8 Card with Apple's Find My app.
- Update your iPhone to the latest version of iOS.
- Activate Bluetooth.
- Press your LOC8 Card button once (once arrow pointing to button on your iPhone screen for pairing).
- Open the Apple Find My app.
- Tap "+", then select "Add Other Item".
- Bring your LOC8 Card on your iPhone screen for pairing.
Visual Description of Setup: An illustration shows a hand holding an iPhone, with an arrow pointing from the LOC8 Card towards the iPhone screen, indicating the pairing process. The "JOURNEY" logo is visible on the card.
Compliance Page
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Responsible Party - U.S. Contact Information
ALOGIC USA LLC
37524 Marsten DR,
Newark CA 94560, USA
EU Declaration of Conformity
Hereby, ALOGIC Corporation declares that this product is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address by clicking on the Compliance Documentation link: journeyofficial.com
Canadian Compliance
Innovation, Science and Economic Development Canada Statement (ISED)
This device complies with RSS-216 of the Industry Canada Rules. Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Radiation Exposure Statement:
The product complies with the Canada portable RF Exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. Further RF exposure reduction can be achieved if the product can be kept as far as possible from the user's body or the device is set to a lower output power if such a function is available.
This digital apparatus complies with CAN ICES-003(B)/NMB-003 (B).
Declaration d'Innovation, Sciences et Developpement economique Canada (ISDE)
L'emetteur/recepteur exempt de licence contenu dans le present appareil est conforme aux CNR d'Innovation, Sciences et Developpement economique Canada applicables appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes:
- L'appareil ne doit pas produire de brouillage;
- L'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.
Déclaration d'exposition aux radiations:
Le produit est conforme a la limite d'exposition aux RF portables au Canada etablie pour un environnement non controle et est sans danger pour le fonctionnement prevu tel que decrit dans manuel. Une reduction supplementaire de l'exposition aux RF peut etre obtenue si le produit peut etre maintenu aussi loin que possible du corps de l'utilisateur ou si l'appareil est regle sur une valeur inferieure, puissance de sortie si une telle fonction est disponible.
Ce peripherique numerique est conforme a la norme CAN ICES-003(B)/NMB-003 (B).
Use Lost Mode
If you can't find your card, enable Lost Mode. This will trigger Find My app notifications when your card is nearby.
- Tap "Continue".
- Follow the on-screen steps to finish setting up Lost Mode.
Your LOC8 Card will stay linked to your Apple ID, unless you unpair it. If someone finds your item while it is in Lost Mode, they can use their iPhone or any NFC-capable device to reach you.
Troubleshooting
This device can be reset if you have trouble pairing the card with your iPhone, or if you want to unpair it and give it to someone else.
To reset:
- Hold down the button for 10 seconds.
- Release the button once you hear the ringtone sound five times.
- You can repeat this step in "SETUP WITH APPLE'S FIND MY APP" to pair the card with your iPhone.
Charging Your LOC8 Card
Follow these steps to charge your LOC8 Card:
- Place the LOC8 Card on a wireless charger (with the card's thunder logo-side facing the charging surface). Once charging begins, the card's indicator light will illuminate. Once the card is fully charged, the indicator light will switch off.
- It takes approximately two hours to fully charge the LOC8 Card. A fully charged card battery lasts up to four months.
When the battery level is low, you will receive an urgent beep sound from the LOC8 Card. The Find My app will send a notification to your phone to remind you that the product's battery is low. You can also check the battery level of the LOC8 Card in the "Find My" app.
Warnings
Avoid exposing the LOC8 Card to extreme conditions that may affect its functionality.
- Keep your card away from all heat and fire sources, including heating equipment, heaters, ovens, open flames, and direct sunlight.
- Do not attempt to repair or disassemble the LOC8 Card yourself. Any unauthorized modification may result in damage or malfunction.
- Avoid using or storing the LOC8 Card in environments with high humidity or temperatures exceeding 60°C (140°F). This helps prevent potential failures.
- Minimize environmental harm by disposing of the LOC8 Card in adherence with your local government's regulations on waste disposal.
To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended. The Find Items app on Apple Watch requires the latest version of watchOS.
Use of the "Works with Apple" badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc. iOS is a trademark registered trademark of Cisco in the U.S. and other countries and is used under license.
Australian Warranty
Warranty Period
12 Months
Warranty Terms
ALOGIC Corporation Pty Ltd warrants this product to be free from defects in materials and workmanship for the warranty period stated above from the date of purchase, provided the product is used in accordance with the accompanying recommendations and instructions.
Exclusions
This warranty no longer applies where any defect results from alteration, accident, misuse, abuse or neglect of the product. The warranty does not cover the product failing to operate due to the battery that powers it being depleted. The battery is a consumable item intended to be replaced when it is exhausted.
How to Make a Claim
Please retain your receipt as proof of purchase and return the product with the receipt to your place of purchase to make a warranty claim.
This warranty is in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights under New Zealand legislation.
ALOGIC Corporation Pty Ltd
Level 34, 140 William St
Melbourne VIC Australia 3000
1300 760 989
