TP-Link Archer TX20U Wireless USB Adapter

Connect to a Computer

Note: It is recommended to connect the adapter to a USB 3.0 [USB 3.0] port.

Diagram Description: A computer is shown connected to the Wireless USB Adapter via a USB port. The adapter is depicted as a small device plugged into the computer's USB port.

Install Driver

1. Go to My Computer or This PC.
2. Double click the TP-Link CD-ROM then run SetupInstall.exe to install the driver.

Note:

• If you cannot find the setup program, please download the driver at www.tp-link.com/support.
• If an unknown publisher message pops up, select Yes to continue.
• If Windows User Account Control requires admin credentials, type your user name and password of your Windows administrator account.

Join a Wireless Network

1. Click the network icon on the taskbar (the icon might look like one of these: [network icon]).
2. Select your Wi-Fi network, click Connect and enter the password when prompted.

Diagram Description: The network status shows "Network 6 Connected". A Wi-Fi network named "TP-Link_XXXX" is listed, with options for "Connect automatically" and "Connect".

Troubleshooting

If you have problems during the installation, please refer to the following online FAQs:

• Can’t find the hardware version of the adapter: https://www.tp-link.com/faq-46.html
• Can’t find or connect to the wireless networks: https://www.tp-link.com/faq-2253.html
• Can’t install the driver: https://www.tp-link.com/faq-2252.html

Safety Information

• Do not attempt to disassemble, repair, or modify the device. If you need service, please contact TP-Link.
• Do not use the device where wireless devices are not allowed.
• Keep the device away from water, fire, humidity or hot environments.
• This product can be powered only by power supplies that comply with Power Source Class 2 (PS2) or Limited Power Source(LPS) of IEC 62368-1.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2011/65/EU and (EU) 2015/863. The original EU Declaration of Conformity may be found at https://www.tp-link.com/en/support/ce.

TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of the Radio Equipment Regulations 2017. The original UK Declaration of Conformity may be found at https://www.tp-link.com/support/ukca.

Support

For technical support, replacement services, user guides, and other information, please visit https://www.tp-link.com/support.

[compliance marks]