Husky 80 in. 10-Drawer Tool Chest and Cabinet Set with Side Locker

Safety Information

General Safety:

• Do not open more than one drawer at a time.
• Keep children away from the tool chest/cabinet, power strip, and LED working light.
• To prevent tipping, load the product starting with the bottom drawers.
• Keep locking casters engaged unless moving the cabinet to prevent rolling.
• Lock all lids and drawers before moving the cabinet/chest.
• Do not step in any drawer.
• Push, do not pull, when moving this product.
• Do not alter the product, including the power strip and LED working light.

DANGER: ⚠️ Do not stand on this product. You may fall or cause the product to tip.

DANGER: ⚠️ Do not move the product prior to closing and locking all drawers. Drawers could open, making the product unstable and prone to tipping.

DANGER: ⚠️ Do not mount this product on a truck bed or any other moving object.

WARNING: ⚠️ Keep the product on a level surface. It may become unstable and tip if stored or moved on an uneven surface.

WARNING: ⚠️ Be careful when closing the cover. Remove hands before closing.

WARNING: ⚠️ Do not unplug by pulling on the cord. Grasp the plug, not the cord.

CAUTION: ⚠️ Do not lift this product directly with a forklift or tow with any mechanical devices.

CAUTION: ⚠️ Do not exceed the maximum product weight, including contents, or the maximum weight for each drawer. See Specifications on page 4.

CAUTION: ⚠️ Only transport this product when empty. Properly secure when transporting.

WARNING: ⚠️ Unplug from outlet when not in use and before putting on or taking off parts.

WARNING: ⚠️ Keep the cord away from heated surfaces.

WARNING: ⚠️ Do not use outdoors.

Plug and Outlet Safety:

• This product is for use on a nominal 120-volt circuit with a grounding plug. Ensure chest/cabinet plugs match the outlet. Never modify the plug. Do not use adapter plugs with grounded power strips.
• Avoid body contact with earthed or grounded surfaces (pipes, radiators, etc.) as there is an increased risk of electric shock.
• Chests/cabinets marked "Grounding Required" have a power strip with a three-wire cord and three-prong grounding plug. This must be connected to a properly grounded outlet. Grounding provides a low-resistance path to carry electricity away from the user, reducing shock risk. The grounding prong connects through the green wire in the cord to the power strip's grounding system. This green wire must be the only wire connected to the grounding system and attached to an electrically "live" terminal. Ensure your power strip is plugged into an appropriate, properly installed, and grounded outlet according to all codes and ordinances.

Safety Information (continued):

WARNING: ⚠️ The chest-cabinet is intended for household use.

WARNING: ⚠️ Do not allow the product to fall from high places.

WARNING: ⚠️ For loading, place heavier items at the bottom and not near the top to prevent tipping.

DANGER: ⚠️ To reduce the risk of electric shock, always unplug this chest-cabinet from the electrical outlet before cleaning.

CAUTION: ⚠️ Do not use the side handle as a point of leverage to lift the unit off the ground. It is only designed to aid in movement around on casters. Failure to adhere may cause the handle to break, leading to personal injury or product damage.

LED Working Light Safety:

• Close supervision is necessary when the product is used near children to reduce injury risk.
• Do not contact hot parts.
• Only use attachments recommended or sold by the manufacturer.
• To reduce electrical shock risk, do not put the product in water or other liquid. Do not place or store where it can fall into a tub or sink.

WARNING: ⚠️ Only use the Portable luminaire with the included Transformer rated 100-240Vac, 50/60Hz, 0.5A max and output 5Vdc, 2.4A.

CAUTION: ⚠️ This working light is designed for indoor use only. Do not use in humid environments (e.g., bathrooms) or outdoors, as components may short-circuit and cause accidents.

FCC Compliance:

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used per instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: ⚠️ Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Responsible Party Information:

Clearwater Metal Vn JSC
Lot CN2, Mai Trung IZ, An Tay Village, Ben Cat Town, Binh Duong Province, Vietnam.
Tel: +84.274.3581.773
Product name: Power strip 6 / 8 outlets with 2 USB ports
Model#: K2415009 / K2415010 / K2415014 / K2415021

Warranty

The manufacturer warrants the product to be free from defects in materials and workmanship for a period of five (5) years from the date of purchase. This warranty applies only to the original consumer and only to products used in normal use and service. If the product is found to be defective, the manufacturer's sole obligation and your exclusive remedy is the repair or replacement of the product at the manufacturer's discretion, provided the product has not been damaged through misuse, abuse, accident, modifications, alteration, neglect, or mishandling. This warranty does not apply to any product found to have been improperly installed, set-up, or used in any way not in accordance with the supplied instructions. This warranty does not apply to product failure resulting from accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not related to faulty material or workmanship. This warranty does not apply to the finish on any portion of the products, such as surface and/or weathering, as this is considered normal wear and tear.

The manufacturer does not warrant, and specifically disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor/expense costs involved in the replacement or repair of said product.

Contact the Customer Service Team at 1-888-HD-HUSKY or visit www.huskytools.com.

Pre-assembly

Tools Required

Phillips screwdriver ?

Safety goggles ?

Hardware Included

NOTE: Hardware not shown to actual size.

Specifications

NOTE: ℹ️ Begin product assembly close to the final intended location of your chest/cabinet. This product is heavy and may be difficult to move after assembly.

Package Contents

The package includes the following main components:

• Top chest (B)
• Rolling cabinet (E)
• Side locker (O)
• Handles (A, D)
• Casters (G, H)
• Drawer liners (L)
• Power strips (N) and brackets (F)
• Locks (J) and keys (K)
• Drawer slides
• Shelf clips (P) and shelves (Q)
• LED work light (R)
• Coat hook (S)
• Various brackets (C) and screws/bolts (AA, BB, CC, DD, EE)

Detailed breakdown of parts:

Assembly Instructions

Step 1: Attaching the side handle

Attach the side handle (D) to the rolling cabinet (E) using four bolts (AA). The holes in the cabinet are tapped and do not require nuts.

Step 2: Placing the chest

NOTE: ℹ️ Two people may be required to complete this step.

Attach two handles (A) to the top chest (B) for each side by using two bolts (BB) per handle. Place the top chest (B) on top of the rolling cabinet (E).

Step 3: Installing the brackets

NOTE: ℹ️ The holes in the cabinet are tapped and do not require nuts.

Attach the brackets (C) to the back of the product to secure the top chest (B) to the rolling cabinet (E). Place the brackets over the holes and secure with four screws (DD) per bracket. Tighten all screws securely with a screwdriver.

Step 4: Attaching the power strip brackets

Attach the power strip brackets (F) to the top chest (B) and rolling cabinet (E) by using two screws (DD) per bracket. Tighten all screws using a screwdriver. Do not over-tighten the bolts to avoid damage to the finish.

Step 5: Installing the drawer liner

Place the drawer liners (L) in appropriately sized drawers and the chest lid area to protect the surface.

Step 6: Installing the casters

CAUTION: ⚠️ Do not over-tighten the screws.

Lay the side locker (O) on its back, using packaging material to protect the finish. Mount the two swivel casters with brake (G) to the side locker (O) using four bolts (CC) per caster. The swivel casters with brake (G) should be installed on the end of the side locker (O). Tighten all bolts with a wrench (EE).

Step 7: Installing the handles on the side locker

Remove the handles (A) from the top chest (B) by loosening the bolts (BB). Attach the handles (A) to the side locker (O) by using two bolts (BB) for each handle. Tighten all bolts securely with a screwdriver.

Step 8: Attaching the side locker to the cabinet

NOTE: ℹ️ Two people may be required to complete this step.

Screw the bolts (CC) on the top chest (B) and rolling cabinet (E). Do not fully tighten bolts at this time. Return the side locker (O) to its upright position. Clip the side locker (O) to the bolts on the left side of the top chest (B) and rolling cabinet (E). Pull the side locker (O) down to ensure it is well mounted.

Step 9: Tightening the side locker

Open the door of the side locker (O). Tighten all the bolts inside the panel by using a screwdriver.

Step 10: Installing the brackets on side locker

NOTE: ℹ️ The holes in the cabinet are tapped and do not require nuts.

Attach the brackets (C) to the back of the product to secure the side locker (O) to the top chest (B) and rolling cabinet (E). Place the brackets over the holes and secure with four screws (DD) per bracket. Tighten all screws securely with a screwdriver.

Step 11: Installing the shelf brackets

Install the four shelf clips (P) for a shelf (Q) inside the locker area at the desired shelf height location. Ensure all shelf clips are aligned horizontally and properly seated in the slots.

Step 12: Installing the shelf

Install the shelf (Q) inside the locker area so that it sits on top of the four shelf clips (P) flush and level.

Operation

Step 1: Locking and unlocking the unit

IMPORTANT: ℹ️ The drawers must be fully closed before locking/unlocking the unit.

To lock the unit, insert the key (K) into the lock (J) and turn it one quarter turn counterclockwise. Then remove the key.

To unlock the unit, insert the key (K) into the lock (J) and turn it one quarter turn clockwise. Then remove the key.

Step 2: Removing/installing the drawers

Removing the drawers:

• Fully extend and empty the drawer.
• On the slide, lift up the plastic release lever on one slide and push down the plastic release lever on the other slide.
• Gently pull the drawer out so the slides can ride over the stops.

Installing the drawers:

• Pull the slides and slide carrier out until fully extended.
• Hold the slide on the cabinet while aligning it with the slide on the drawer.
• Slightly insert one side and repeat for the other side.
• Slowly push the drawer until it is fully closed to engage the slide.
• Open and close the drawer to verify proper operation.

Step 3: Opening the top chest lid

Open the top chest lid to 90 degrees first. Push it into the top chest's inside-bottom.

IMPORTANT: ℹ️ The lid must be fully closed before moving the unit.

Step 4: Installing the LED work light

Connect the USB wire with the adapter. Plug in the magnetic LED work light (R) on the tool chest for extra light. Press the button on the LED light to turn it on for use.

Maintenance

Step 1: Maintaining the casters

Grease the casters annually using high-quality bearing grease.

Step 2: Maintaining the drawers

Periodically clean the drawer trim and inside the drawers with a mild detergent and water. Remove grease and oil with a standard, nonflammable cleaning fluid.

The use of drawer liners is recommended to protect the finish inside the drawers and make them easier to clean. Drawer liners can be purchased at The Home Depot and can be cleaned with soap and water.

Lubricate the slides semi-annually with grease or equivalent.

Care and Cleaning

This steel product has been coated with industrial powder coating for a durable finish.

To help protect the powder-coated finish, do not allow harsh chemicals (oil, grease, or other chemical) to remain on the powder coating surface.

Use a glass cleaner (Windex® or equivalent product) to clean and maintain all surfaces of powder coating.

Service Parts

The following parts are available for service: