Safety Instructions
Please read and follow all safety instructions provided in this manual.
- When installing and using, pay attention to static electricity. Keep the product away from sharp objects or strong corrosive chemicals.
- When bending the light strips during installation, avoid bending the LED components, as this may affect the product's lifespan.
- Before attaching the light strips, remove nails, metal, or other conductive objects from the installation surface to prevent short circuits.
- Do not install the light strips near heat sources.
- Do not allow children to install the light strips by themselves.
- Do not install the light strips near potentially hazardous sources (e.g., candles, items filled with liquid, etc.).
Package Contents
- 4x LED Light Strip
- 1x Adapter
- 1x Control Box
- 1x Camera
- 1x User Manual
Control Box Description
Illustration of the Govee control box with three buttons labeled 'Power', 'Color', and 'Music/Dimming', and an indicator light.
Power Button: Press to turn the light strips on/off.
Color: Press to set the strip color.
Music / Dimming: Press to enter Music mode. Long press to adjust brightness.
Indicator Light
- a) Red light indicates the device is not connected to the network.
- b) Blue light indicates the device has successfully connected to the network.
- c) No light indicates the device is not powered on or not functioning correctly.
Installing Your Device
1. Preparation Before Installation
- a) Open the package and check all items listed in the package contents.
- b) Turn on the light strips and check if they light up.
2. Installation Procedure
- a) Clean the surface where you will install the strips, ensuring it is dry and clean.
- b) Attach the light strips to the back of the television. Press them firmly and then reinforce them with the provided clips.
Diagram showing the LED light strips being attached to the back of a television screen, with a hand pressing them onto the surface. Arrows indicate the direction of attachment.
- c) Place the camera at the top center of the television.
- d) Connect the light strip cable and the camera cable to the control box (USB-C/DC).
Diagram showing the control box connected to the LED strips and camera, and plugged into a power outlet. The camera is positioned at the top center of the TV.
Pairing Your Device with Govee Home App
For pairing, you will need a WiFi router supporting 2.4GHz and 802.11 b/g/n bands. 5GHz band is not supported.
- Download the Govee Home app from the App Store or Google Play.
- Turn on Bluetooth on your smartphone.
- Open the app, tap the "+" icon in the top right corner, and search for "H6097".
- Tap the device icon and follow the on-screen instructions to complete pairing.
Camera Calibration with Govee Home App
- Mount the camera at the top center of the screen.
- Apply the stickers to the 7 calibration points on the screen.
Illustration of a TV screen with seven square markers indicating calibration points, and a circular icon representing the camera at the top.
- Open the Govee Home app and click to enter the H6099 page. Navigate to the settings page and click on "Calibration". Follow the in-app instructions to complete the calibration.
Tips:
- a) Drag the calibration points on the app screen to the locations of the corresponding orange foam stickers.
- b) The red calibration points are the same as one orange foam sticker in two different cameras.
Diagram illustrating the camera's view of the TV screen, showing the fisheye distortion and the placement of positioning points for calibration.
The image will be distorted by the fisheye lens. Ensure that the calibration points are selected correctly and that the calibration points do not overlap or cross.
Voice Control
- Open the app and tap the device icon to go to the details page.
- Tap the settings icon in the top right corner.
- Select the "Using Guidance" option and follow the on-screen instructions to control the device by voice.
Specifications
- Input Voltage (Adapter): 100-240VAC 50/60Hz
- Input Voltage (Control Box): 12VDC / 2A
- Length: 2.4 m
- Light Display Technology: RGBICW
Troubleshooting
Light Strips Not Lighting Up
- Check all cable connections. Disconnect and reconnect the power adapter and DC port to ensure the control box powers on correctly. The light strips should light up 10 seconds after power-on.
- Before turning on the light strips, ensure they are plugged into the LED port.
- If you disconnected the light strips, restart the power adapter after the lights function correctly.
Calibration Failed
- Recalibrate the light strips.
- Ensure no other strong light is affecting the camera.
- Calibration points must be selected correctly. For example, the top calibration point of the TV cannot be dragged to the bottom. Calibration lines must not overlap or cross.
- Calibration can only be initiated after successfully connecting the light strip to the WiFi network.
Included Stickers Not Sticking Well
- Wipe the installation surface to ensure it is dry and clean.
- When attaching the light strips, press them firmly.
- Reinforce the light strips using the provided clips or other strong adhesive tapes.
WiFi Connection Failed
- During setup, do not skip any WiFi connection steps. Ensure you have entered the correct WiFi name and password according to the app's instructions.
- 5GHz WiFi is not supported. Connect the light strip to the 2.4G WiFi band and restart the router.
- Use your smartphone to check if the WiFi connection is stable.
- The light strips may not be compatible with your router. Try connecting the light strips to your smartphone's hotspot.
Support and Compliance
Support Email: info@tygotec.eu
EU Declaration of Conformity
Shenzhen Intellirocks Tech Co. Ltd. hereby declares that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.
A copy of the EU Declaration of Conformity is available online at www.govee.com/
EU Contact Address:
BellaCocool GmbH: info@bellacocool.de
Pattenkoferstraße 18, 10247 Berlin, Germany
