Govee TV Backlight 3 Lite User Manual

Safety Instructions

• Be cautious of static electricity during installation and usage. Keep the product away from sharp objects or strong corrosive chemicals.
• When bending the strip light during installation, avoid folding the LED components as it may affect the product's lifespan.
• Remove nails, metal, or other conductive objects from the installation surface before attaching the strip light, as it may cause short-circuiting.
• Do not install the strip light near any heat sources.
• Do not allow children to install the strip light alone.
• Avoid installing the strip light near potentially dangerous sources (e.g., candles, liquid-filled objects).
• CAUTION-The product is not a toy. Children and the disabled should use it under adult supervision.

Introduction

Thank you for choosing the Govee TV Backlight 3 Lite. This TV strip light provides an immersive viewing experience. The camera positioned in the top center of your TV can intelligently capture the colors displayed and automatically apply them to your lights. It significantly enriches your gaming worlds and movie nights.

What You Get

At a Glance

Control Box

The control box features the following:

• On/Off Button: Press to turn on/off.
• Color Button: Press to adjust the color.
• Music/Dimmer Button: Press to enter Music Mode. Long press to adjust the brightness.
• Indicator Light:
  • a. A red light indicates the device is not connected to the network.
  • b. A blue light indicates the device has successfully connected to the network.
  • c. No light indicates the device is not powered on or malfunctioning.

Camera

The camera unit includes:

• Camera X 1
• Silicone Pad
• Type-C Input port

Installing Your Device

Preparation Before Installing

• Unbox the strip light and check all items listed in the packing list.
• Power on the strip light and check whether it lights up.

Installing Steps

1. Wipe the installation surface: Ensure the back of your TV is dry and clean. (Visual: A hand holding a cloth wiping a TV screen.)
2. Attach the strip light: Stick the LED strip light to the back of the TV. Press it firmly and reinforce it with the provided clips. (Visual: LED strip being applied to the back of a TV, with clips shown.)
3. Position the camera: Place the camera at the top center of the TV. Ensure the TV's top edge fits snugly into the right-angle slot at the front of the camera. (Visual: TV with camera mounted at the top center, with close-up diagrams showing the 90-degree angle fit.)
4. Connect cables to control box: Insert the cable from the strip light and the camera cable into the control box. The ports are labeled Type-C/DC. (Visual: Control box with DC and Type-C ports, showing cables being plugged in.)
5. Position the control box: Ensure the control box is placed in a convenient location near your TV.
6. Power on and connect: Power on the strip light and connect it using the Govee Home App.

Pairing Your Device with Govee Home App

What you need:

• A Wi-Fi router supporting 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.

Steps:

1. Download the Govee Home App from the App Store (iOS devices) or Google Play (Android devices). (Visual: App Store and Google Play logos with "Download on the App Store" and "GET IT ON Google Play" text.)
2. Turn on your smartphone's Bluetooth.
3. Open the Govee Home app, tap the "+" icon in the top right corner, and search for "H6097".
4. Tap the device icon and follow the on-screen instructions to complete pairing.

Calibrating the Camera with Govee Home App

1. Mount the camera: Mount the camera to the center of the screen. (Visual: TV screen with a dashed line indicating the center, and the camera positioned at the top center.)
2. Apply calibration stickers: Stick the provided foam stickers to the 7 calibration points on the screen. (Visual: TV screen with 7 square stickers placed at designated points.)
3. Begin calibration: Open the Govee Home App, navigate to the details page, and tap "Calibration". Follow the on-screen instructions.
   • Tips: Drag the seven calibration points to the corresponding position points. (Visual: Diagram showing calibration points and lines connecting them.)
   • Ensure calibration points are chosen correctly and calibration lines do not overlap or cross each other, or extend outside the screen. The chip will then automatically calibrate the fish-eye picture and capture colors. (Visual: Examples of correct and incorrect calibration line configurations.)

Controlling the Device with Your Voice

1. Open the Govee Home app and tap the device icon to enter the details page.
2. Tap the settings icon in the top right corner.
3. Select "User Guide" and follow the on-screen instructions to control the device using your voice.

Specifications

Troubleshooting

1. The strip light does not light up:
   • Check all wired connections. Unplug and replug the power adapter and the DC port to ensure the control box powers on correctly. The strip light will light up 10s after being powered on.
   • Check the wired connections for the strip light and the camera.
   • If you unplugged the strip light, reboot the power adapter after the light is working correctly.
2. Calibration failed:
   • Calibrate the strip light again.
   • Make sure no other strong lights are affecting the camera.
   • Calibration points must be chosen correctly. For example, the top calibration point on your TV cannot be dragged to the bottom. The calibration lines cannot overlap or cross each other.
   • Calibration can only begin after the strip light is successfully connected to Wi-Fi.
3. The provided strip light's adhesive doesn't stick well:
   • Wipe the installation surface to ensure it is dry and clean.
   • When attaching the strip light, make sure you press down firmly.
   • Reinforce the strip light with the provided clips or other strong adhesives.
4. Calibration and picture upload failure:
   • With your smartphone, check whether the Wi-Fi connection is stable.
5. Wi-Fi connection failure:
   • Do not skip the Wi-Fi connection during setup. Ensure you input the correct Wi-Fi name and password according to the app's instructions.
   • 5GHz Wi-Fi is not supported. Connect the strip light to a 2.4G Wi-Fi band, then reboot your router.
   • With your smartphone, check whether the Wi-Fi connection is stable.
   • The strip light is not compatible with the Wi-Fi name or password. Please change the Wi-Fi name and password.
   • The strip light is not compatible with your router. Please try to connect your strip light to a smartphone hotspot.

Disassembly Tip

The product is divided into two parts: (1) a light source and (2) an adapter. By detaching the output terminal of the adapter, you can easily remove the light source or the adapter. (Visual: Diagram showing the LED strip light and the control box/adapter separated.)

Customer Service

• ? Warranty: 12-Month Limited Warranty
• ?️ Support: Lifetime Technical Support
• ✉️ Email: support@govee.com
• ? Official Website: www.govee.com
• Social Media: @Govee, @govee_official, @govee.official, @Goveeofficial, @Govee.smarthome