ClearOne Versa™ Mediabar™ - BlueTooth

1. About The Product

1.1 Feature

• Designed with built-in all-in-one camera, microphone, and speaker.
• With Speaker Tracking Function and Auto Framing Tracking Function.
• 110° ultra-wide FOV with no distortion, full coverage of the whole meeting room.
• 4K Ultra HD video @30fps, brings super clear video experience.
• EPTZ realizes automatic viewfinder and intelligently selects all participants.
• Effective and accurate speaker detection and tracking function, fast and accurate close-up of speakers.
• Built-in high-sensitive omnidirectional microphone, up to 5 meters of sound pickup distance, supports ANS, AEC, AGC.
• USB 3.0, MJPEG/H.264/H.265/YUV.
• Supports UVC/UAC protocol.
• Configure mute and mute prompt functions.
• Supports Bluetooth and USB connection (can not work together).
• Exquisite remote control settings, easy to hold and control.

1.2 Application Scenarios

Diagram shows a meeting room setup with a table and four people. Lines originating from the front of the room indicate a 110° ultra-wide field of view, covering the entire room.

2. Components

2.1 Accessories

The following accessories are included: Camera, AC Adapter, Remote Control, USB Cable (6 ft / 1.8 m), Wall Mount Bracket (2), Thumbscrew (8), Mounting Bar Clip (4), Mounting Bar (2).

2.2 Main Parts & Interfaces

Diagrams show the Front View, Side View, and Bottom View of the Versa Mediabar. The interfaces are numbered:

2.3 Remote & Control (Standard)

Diagram of the standard remote control with numbered buttons. Functions include:

2.4 Common Function

2.4.1 EPTZ

The camera supports EPTZ control, and 4x digital zoom. The EPTZ can be controlled via direction keys to adjust the image position. The current image size can be adjusted via the zoom button. Note: The Pan / Tile button cannot work under the max FOV.

2.4.2 Auto Framing

This product has an auto framing function. Press the corresponding key, and the camera screen intelligently scales according to the number of people in the meeting scene, centralizing all participants. Press again to turn off the automatic box. Note: The auto framing state will be ended by pressing PTZ buttons or the Auto Framing button.

2.4.3 Speaker Tracking

The all-in-one supports Speaker Tracking function. Press the Speaker Tracking button to turn on/off the function. The all-in-one will give the person who is speaking a close-up view when Speaker Tracking is ON.

2.4.4 Set/Call The Preset

Long press (2 seconds) the number buttons to set a preset. Short press the number buttons to CALL a saved preset, and the camera will quickly go to the saved preset position.

2.4.5 Menu Function

After entering the menu, select menu options via direction keys. Press the HOME key to enter options and adjust them using the pan button. Press the Menu key to return to the previous menu until exiting.

2.4.6 USB And Bluetooth Switching Instructions

After the camera is connected to the USB cable and powered on, the default is USB mode. Long press the HOME key for 2 seconds: the sound source switches to Bluetooth, and "BT" is displayed for 5 seconds. Bluetooth is visible and connects automatically (pairing required for the first time). In Bluetooth mode, long press the HOME key for 2 seconds: Bluetooth disconnects, "USB" is displayed for 5 seconds, the sound source switches to USB, and Bluetooth becomes invisible and cannot connect.

2.4.7 Indicator

3. Installation

3.1. Dimension Figure

Dimensions of the Versa Mediabar: Width (Front View): 23.70 inches (602 mm). Height (Front View): 3.74 inches (95 mm). Depth (Side View): 2.91 inches (74 mm). Depth (Bottom View): 15.28 inches (388 mm).

3.2. Installation

3.2.1. Bracket (Standard)

For standard bracket installation: If the TV lacks a mounting bracket, attach the mount bars using screw holes on the back of the TV. Alternatively, if using a mounting bracket, attach the mount bars to the mounting bracket.

3.2.2. Wall-mount

For wall-mount installation: Drill holes at the desired mounting location based on the aperture and position of the mounting hole, and fix the bracket with screws. Then, insert the camera base into the bracket's groove, ensuring it is firmly attached.

3.3 Connection

USB Connection: The Versa Mediabar connects to a laptop via a USB cable and AC adapter.

Bluetooth Connection: The Versa Mediabar can connect wirelessly via Bluetooth to a smartphone, tablet, or laptop.

3.4 Bluetooth Connectivity

Step 1

Open the camera application on your laptop and select the media bar camera to see the OSD menu. Press the MENU button on the remote and navigate to the SYSTEM menu for options.

Step 2

In the SYSTEM menu options, change the ACTIVE AUDIO setting from USB to BT.

Step 3

To pair for the first time, add the Versa Mediabar BT as a Bluetooth device in your laptop's settings. Once paired, connect by clicking "connect". Disconnect the USB cable from the Versa Mediabar to the laptop and ensure Bluetooth is enabled on the laptop to select the "Versa Mediabar BT" from search results.

Step 4

The laptop audio is now connected to the media bar's speaker and microphone system.

4. Menu

4.1. Menu Structure

The OSD menu can be accessed via the MENU button on the remote. Navigation uses arrow buttons, and the HOME button enters sub-menus. The main menu includes IMAGE, SYSTEM, DEVICE INFO, and DEFAULTS.

Image Menu

System Menu

Device Info Menu

Defaults Menu

The DEFAULTS menu allows CONFIRMATION to reset settings.

5. Technical Data

Camera

Audio

Interface

General