ClearOne Flex Room Design Guide
Document Revision: 1.9 - 08 April 2022
Room Application
Flexible Seating, Media Content Sharing, Video and Teleconferencing
Included Interfaces
- VoIP
- Analog Telco
- Wireless Media Sharing
Primary Equipment
- Converge Pro 2 48VT
- BMA 360 Microphones
- LS6CT Speakers
- Clickshare CX
Software/Firmware Revisions Utilized
- Console AI Version: 7.5.4.1
- DSP Version: 8.5.15.0
- BMA 360 Version: 1.0.6.10
Room Illustrations
A floor plan illustrating a large, open-plan meeting room. The room dimensions are approximately 15.25 meters by 7.62 meters. It features flexible seating arrangements with multiple tables and chairs. Key AV components indicated are a ClickShare CX unit, two BMA 360 microphone arrays, a WIFI Access Point, and LS6CT Ceiling Speakers distributed throughout the room.
Room Description
Large open plan room with mobile seating and tables. Great space for having general meetings and sharing content with a focus on wireless, hands-free operation.
Wiring Diagram
This wiring diagram depicts the system connectivity. A ClearOne Converge Pro 2 48VT DSP Mixer serves as the central hub. It connects to two BMA 360 Microphone Arrays and multiple LS6CT Ceiling Speakers via P-Link (CAT 6 cables). A ClickShare CX unit is connected for wireless content sharing. The system also interfaces with network, VoIP, and telephone lines via RJ45 connectors. Power is supplied via 90W PoE injectors for the BMA 360 units. The diagram includes a legend indicating connections for P-Link, Network, USB, HDMI, and Wireless. A note specifies that individual P-Link runs should not exceed 61 meters.
Equipment List
| Qty | Part Number | Product Name | Description |
|---|---|---|---|
| 1 | 910-3200-008 | CONVERGE Pro 2 48VT | DSP Mixer with 4 Mic/Line AEC Inputs, 8 Mic/ Line Outputs, USB Audio, VoIP, Telephone Interface, 2 x 10 Watt Power Amplifier |
| 2 | 910-3200-209 | 90W PoE++ power supply kit for BMA | Includes 1 x 90 Watt PoE++ Injector, 2 x 7.6m CAT6 cables |
| 1 | 910-3200-202 | 36W PoE+ power supply kit for BMA | Includes 1 x 36 Watt PoE+ Injector, 2 x 7.6m CAT6 cables |
| 2 | 910-3200-208-I | BMA 360 600 mm | BMA with 4 x 15 Watt Power Amplifiers. PoE Injector and CAT6 cables not included. |
| 1 | 910-3200-302 | USB Expander for CONVERGE Pro 2 | Includes 1.8m USB cable |
| 4 | 910-151-001-01 | Ceiling Speakers | Includes 2 x LS6CT ceiling speakers with 8 ohm and 70V/100V transformer taps and ceiling tile bridges. |
FlowView™ Diagram
The FlowView™ diagram illustrates the signal flow within the system. Inputs include USB EXP RX (from ClickShare_RX), Conference RX (Telco, VoIP, BT), and Room Microphones (BMA_360). These signals are processed by a central 'Mixer Block_001'. Outputs include USB EXP TX, ClickShare_TX, Conference TX (Telco, VoIP, BT), and Room Speakers (BMA360_Speaker-GR). The diagram shows logical grouping and connections between components.
Included Macros
- Microphone_Mute: Mutes both room BMA 360 Microphones.
- Microphone_Unmute: Unmutes both room BMA 360 Microphones.
- Room_SPKR_Mute: Mutes all room speaker channels.
- Room_SPKR_Unmute: Unmutes all room speaker channels.
- Room_VOL_DN: Decreases the room speaker volume by 3 dB per execution.
- Room_VOL_UP: Increases the room speaker volume by 3 dB per execution.
* Macros can be executed via Telnet or serial communications. Refer to the Converge Pro 2 Serial Command Reference Manual for details.
Sales and Inquiries
Headquarters
Unit 3, 58 Waterway Drive
Coomera, QLD, 4209, Australia
Contact Information
Phone: Main: +61 7 5561 7530
Sales: sales@avdistributors.com.au
Tech Support: support@avdistributors.com.au
Other product names may be registered trademarks of their respective owners who do not necessarily endorse ClearOne or ClearOne's products. All rights reserved. Information in this document subject to change without notice. © 2022 ClearOne.
