ℹ️ Document Conversion Notice: This document has been converted from PDF and formatted to fit this screen. Diagrams and images may be available only in the original here.

Futaba S3001 Standard Servo

Key Features

Pulse width control system
Ballraced servo
Special long-life servo motor
Indirect-drive potentiometer, protects pot from shock loads
Surface-mount amplifier construction
High torque

Specifications

Power requirement: 4.8 V ~ 6.0 V
Idle current: 12 mA
Torque: 3 kg-cm
Speed: 0.22 sec/60°
Size: 40.4 x 19.8 x 36 mm (1.59 x 0.78 x 1.42 in)
Weight: 45.1g (1.59 oz)

Connections

To each channel port of the receiver:

Black: GND

Red: VCC

White: Signal

[Servo motor with three wires connected to a receiver port]

Models: S3001 Standard Servo, S3001, Standard Servo, Servo

Google Docs
Google Drive
Download [pdf]

File Info : application/pdf, 1 Pages, 28.42KB

S3001 GPL Ghostscript 10.01.1

Related Documents

	Futaba S.BUS PC-Link Software Manual: Connect and Configure RC Servos This manual provides instructions for using the Futaba S.BUS PC-Link software with the CIU-2 USB adapter to set and change operating parameters for Futaba S.BUS servos. It covers software installation, hardware connection, software operation, and detailed explanations of each servo parameter.
	Futaba 4EX 4-Channel FM Radio Control System Instruction Manual Comprehensive instruction manual for the Futaba 4EX 4-channel FM radio control system for aircraft. Covers setup, programming, safety guidelines, and accessories for RC model enthusiasts. Visit http://www.futaba-rc.com for updates.
	Futaba S148 Standard Servo Specifications and Connection Guide Detailed technical specifications for the Futaba S148 Standard Servo, including power requirements, torque, speed, dimensions, weight, and a clear explanation of its wire connections (GND, VCC, Signal).
	Futaba GYD470 RC Drift Car Gyro: Instruction Manual & Setup Guide Comprehensive instruction manual for the Futaba GYD470 Rate Gyro for RC Drift Cars. Learn about features, setup, connections, adjustments, AVCS/NORMAL modes, and S.BUS compatibility for enhanced steering control.
	Futaba R314SB T-FHSS 4-Channel Receiver for Model Cars - Manual & Specifications Comprehensive guide to the Futaba R314SB T-FHSS 2.4GHz S.BUS2 4-channel receiver for model cars, including setup, linking, features, and specifications.
	Futaba R7208SB FASSTest-2.4GHz Receiver: Features, Installation, and Operation Guide This guide provides detailed information on the Futaba R7208SB FASSTest-2.4GHz receiver, including its features, setup, installation, channel modes, dual receiver link system, telemetry capabilities, and LED indicators. It covers essential precautions and compliance information for safe and effective operation.
	Futaba FP-4NBL AM 4 Channel Radio Control System Instruction Manual Comprehensive instruction manual for the Futaba FP-4NBL AM 4 Channel digital proportional radio control system, detailing transmitter and receiver features, setup, operation, and precautions for RC models.
	Futaba T16IZ and GYA553 Ver.2 Airplane Gyro Setup Guide This guide provides detailed instructions for setting up the Futaba GYA553 airplane gyro system with the T16IZ transmitter. It covers connections, configuration of gyro direction, servo limits, holding power, and S.BUS settings for optimal flight control.