nVent California Proposition 65 Declaration of Compliance

California Proposition 65

In accordance with nVent's ESG commitments and California's Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65), nVent strives to deliver products and services that reduce environmental and health and safety impacts. nVent declares, to the best of its knowledge and based on supplier responses and due diligence, that certain products contain chemicals listed under California Proposition 65. These products are labelled and packaged in accordance with the warning requirements. nVent continuously monitors regulations and exercises due diligence within its supply chain to ensure ongoing compliance.

The following table identifies products and articles that contain regulated substances, per California Proposition 65. This list is updated as new information warrants.

Summary of Identified Products and Substances

The primary regulated substance identified across a wide range of nVent products is Styrene (CAS No. 100-42-5), which is associated with the chemical effect of Cancer.

Other substances identified in specific product categories include:

Ethylbenzene (CAS No. 100-41-4) and Titanium Dioxide (CAS No. 13463-67-7) in Touch-Up Paint products.
Dichloromethane (CAS No. 75-09-2) in Air Conditioner - R407C Only products.

The document lists an extensive catalog of nVent product part numbers across various categories, including but not limited to:

Fiberglass Enclosures (e.g., A1-706, A11-2414, A12-2424 series)
Extension Collars - Fiberglass (e.g., A1-EXT706LG, A31-EXT1207LG)
APO Covers and Bases - Fiberglass (e.g., A1-COVERLG, A1-BASELG)
Wiring Troughs - Fiberglass (e.g., F4412FG, F44W12FG)
Feed-Throughs - Fiberglass (e.g., F44W120STFG, F44W24FG)
Box Connectors - Fiberglass (e.g., F44WBFG)
Mounting Foot Kits, Mounting Bracket Kits, Back Plates, Latch Kits
Rack Top Baffles, Window - ABS
Touch-Up Paints
Mount Floor Brush Kits, Cable Tek Post and Gate Kits
RF Solar Boxes, Fiberglass Roof Fans, Exhaust Grilles
Management Spools, Adaptor Frames, Inner Doors, Plinths

The full list of specific part numbers for each product category is detailed in the original document.

	nVent Declaration of Compliance: California Proposition 65 nVent's official declaration regarding California Proposition 65 compliance for its Electrical Connections products. This document lists specific products, the Proposition 65 chemicals they contain, and the associated health effects, based on nVent's due diligence and supplier information.
	nVent LENTON Cadweld Filler Material RBF180 - Product Information Information on nVent LENTON Cadweld filler material, a proprietary blend of iron and aluminum, for rebar splicing. Includes product details, safety notices, and contact information.
	nVent ESD Clip for Strut for AdvancedMC - Product Information Detailed information on the nVent ESD Clip for Strut, catalog number 20849-021, designed for AdvancedMC guide rails. Includes product attributes and installation warnings.
	nVent MI9 Series 100mm Plinth Base - Installation and Specifications Details on the nVent MI9 Series 100mm Plinth Base, including part number MHPL0806C141S, features, materials, and installation warnings. Learn about its use with M19 enclosures for cable management.
	nVent Declaration of Compliance RoHS Directive 2011/65/EU Declaration of Compliance for nVent products regarding RoHS Directive 2011/65/EU and its amendment 2015/863/EU, listing products and any restricted substances or exemptions.
	nVent Electrical Connections RoHS Declaration of Compliance This document declares the compliance of nVent Electrical Connections products with RoHS Directive 2011/65/EU and its amendment 2015/863/EU. It lists product families and specific part numbers that are compliant or non-compliant, along with any applicable exemptions.
	nVent Battery Energy Storage Solutions: Resilient, Safe, and Efficient Electrical Systems Explore nVent's comprehensive Battery Energy Storage Solutions (BESS), offering robust enclosures, advanced cooling, reliable electrical distribution, and grounding for mission-critical applications. Enhance safety, efficiency, and reduce total cost of ownership.
	ProAir Harsh Environment Indoor CR23 Air Conditioner - 1600 BTU, 115V Detailed information on the nVent ProAir Harsh Environment Indoor CR23 air conditioner, featuring 1600 BTU cooling capacity, 115V operation, and a durable light gray steel construction for corrosive environments. Includes product attributes, features, and industry standards.

California Proposition 65

Summary of Identified Products and Substances

Related Documents