Hunter Pilot™ Network Control System Commissioning Checklist

Document Purpose and Submission

This form must be completed and returned to Hunter Industries Inc. by an authorized service provider or the Hunter field service manager for the activation of the Hunter service network plan. Respond to all items that correspond with a description or an "X".

Return To:

Hunter Industries
ATTN: Hunter Golf HSN
1840 La Costa Meadows Drive
San Marcos, CA 92078

Email To: golf@hunter.global

Golf Course Information

Golf Course Name:
Mailing Address:
City:	State/Region:
Zip Code:	Country:
Distributor:	Branch:

Golf Course Contact

Name:

Phone:

Email:

Installer

Name:

Phone:

Email:

Commissioning

Witness (Golf Course Employee):	Hunter SSO Email:
Title:	Title:	Date:

System Type (Add Number of Controllers)

Two-Wire:

Conventional:

Additional Equipment Installed

Weather Station:

POGO® Data Logger:

POGO® Probe:

Communication Type

Wired:

UHFA Radio:

Maintenance Radio:

Authorized Frequencies

Operator Training Completion

Instructor Initials: ____________________ Operator Initials (all that apply): ____________________

Field Interface Connected to Ground (if applicable)

Rod:

Plate:

Ohms Reading:

TeamViewer

TeamViewer ID: ____________________ Password: ____________________

Additional Checklist

[ ] TeamViewer is verified and operational
[ ] Pilot computer Pilot updates completed Firmware: ________
[ ] Windows updates on Pilot computer completed
[ ] Pilot computer Lenovo updates completed
[ ] Pilot CCS database completed
[ ] Pilot CCS map completed
[ ] Hunter SSO created
[ ] Pilot CCS database backup enabled
[ ] Pilot Navigator™ application configuration completed
[ ] Central PC and field interface powered via surge-protected device
[ ] Pilot Command Center Software is operational
[ ] PilotFCP Utility is operational
[ ] Field communication test from CCS performed
[ ] Bidirectional module inventory completed (if applicable)
[ ] 3-minute test cycle of all stations for reporting and operation completed
[ ] 3M-DBRY splices are used on connections
[ ] Wiring layout/Pilot-SG Drawing obtained in PDF
[ ] All Pilot-SG installed correctly

UFHA Radio Report

ATTENTION: When using UHFA modules in controllers, prioritize signal quality over RSSI, as it more accurately reflects communication reliability. If experiencing communication problems, try adding more antennas or using multiple frequencies with MultiTalk™ Technology.

Controller Number	Date Marked	Quality Value	RSSI Value

Programmer Grounding Report

ATTENTION: If grounding is necessary due to lightning activity in the area, all programmers must be grounded and tested with a ground resistance meter. Ground resistance should be 10 ohms or less. If this requirement is not met, additional ground rods or plates must be installed.

Controller Number	Date Marked	Plate (P) or Rod (V)	Resistance Value

PILOT-SG Grounding Report

ATTENTION: If grounding is necessary due to lightning activity, all PILOT-SG must be grounded and tested with a ground resistance meter. Ground resistance should be 10 ohms or less. If this requirement is not met, additional rods or plates must be installed. At least 10% of PILOT-SG must be tested to verify compliance.

PILOT-SG Location	Date Marked	Plate (P) or Rod (V)	Resistance Value

Pilot Hub Current/Diagnostic Report

ATTENTION: Bidirectional modules consume approximately 1 mA each. Output modules must remain within specified mA tolerances for proper operation.

	Output Module	mA Reading	Total Cable Circuits	mA per Circuit	Total Bidirectional Modules
Controller 1	1
	2
	3
	4
Controller 2	1
	2
	3
	4
Controller 3	1
	2
	3
	4
Controller 4	1
	2
	3
	4

	Hunter Pilot Control Network Commissioning Checklist A checklist for commissioning Hunter Pilot Control Networks, ensuring proper installation and operation of golf irrigation systems. Includes sections for golf course information, contact details, installation contractor information, commissioning details, system type, equipment installed, communication type, licensed frequencies, operator training, field interface grounding, TeamViewer setup, and various system checks.
	Hunter G-995-E-73-P2 Golf Rotor - Specifications and Performance Detailed specifications and performance data for the Hunter G-995-E-73-P2 golf rotor, including pressure, flow rate, and precipitation rates for various nozzles.
	Hunter International Price List 2020 for Residential and Commercial Irrigation Explore the Hunter International Price List 2020, featuring a comprehensive range of residential and commercial irrigation products including gear-driven rotors, valves, controllers, nozzles, and accessories. This catalog provides detailed pricing and specifications for innovative irrigation solutions.
	Hunter G-990 Golf Rotor: Performance Data and Specifications Detailed performance data, specifications, and shipping information for the Hunter G-990 Golf Rotor, including nozzle performance, pressure, radius, flow, and precipitation rates.
	Hunter Product Catalogue: Residential, Commercial, and Golf Irrigation Explore the Hunter Industries Product Catalogue, featuring advanced irrigation solutions for residential, commercial, and golf applications. Discover innovative controllers, efficient sprinklers, and micro-irrigation products designed for water savings and optimal landscape health.
	Hunter G-990-DD-73-P2 Golf Rotor: Performance and Specifications Detailed specifications and performance data for the Hunter G-990-DD-73-P2 Golf Rotor, including nozzle performance, dimensions, and shipping information. Features a full-circle opposing nozzle configuration and valve-in-head design.
	Hunter Pro-C Residential and Commercial Irrigation Controller Detailed overview of the Hunter Pro-C irrigation controller, highlighting its features, flexibility, and compatibility with Solar Sync for efficient water management in residential and commercial applications.
	Centralus Irrigation Management Platform for ACC2 and ICC2 Controllers Hunter's Centralus is a web-based irrigation management platform offering powerful and flexible remote irrigation control for ACC2 and ICC2 controllers. Features include mobile-friendly access, user-friendly dashboards, secure cloud-based control, multi-day weather forecasts, and real-time flow monitoring.