Ninja Slushi™ Professional Frozen Drink Maker

Pour & Slush

No-Prep Slushes

Simply Fill & Select. Add 2-8 cups (16-64 oz) to the unit, then select desired preset.

Refer to the Inspiration Guide for the Create Your Own Milkshake & Frappé chart.

Using the Rinse Cycle

This cycle agitates, without cooling, to rinse the unit. After using the Rinse cycle, wash all parts by hand or in a dishwasher to fully clean the unit after each use.

1. Dispense any remaining frozen drink.
2. Stop the current preset. Press the RINSE button.
3. Add hot water up to the vessel's max fill line (64 oz).
4. Slowly dispense the water from the unit immediately after filling.
   NOTE: This water will dispense quickly. Ensure you use a large cup or bowl to capture it.
5. Stop Rinse cycle by pressing the RINSE button again.
6. Press the power button to turn off the unit.
   NOTE: If needed, repeat until frozen drink is rinsed off the evaporator.

Refer to the Inspiration Guide for more details on cleaning parts after using the Rinse cycle.

What's in the Box

Components:

• Motor Base
• Bail Handle
• Easy-Fill Port & Cover
• Evaporator (attached to motor base)
• Auger
• Vessel* (16-oz minimum liquid capacity. 64-oz maximum liquid capacity.)
• Comfort Handle
• Pour Spout (with removable shroud)
• Condensation Catch
• Control Panel
• 2-Part Drip Tray (Store drip tray on side of unit by sliding it onto the knob.)

NOTE: Colors, components, and functions may vary by model.

Using the Ninja Slushi™

1. Add liquid(s) through the easy-fill port.
2. Press the power button to turn on.
3. Select a preset to start.
4. If desired, adjust default/optimal temperature.
5. Unit will beep and LEDs will remain solid once frozen drink reaches temperature.
6. Dispense and enjoy.
   NOTE: Unit will continue running to keep your frozen drink at ideal temperature.

Recipes

Kickstarter: One-Ingredient Soda Slush

Total Time: 15 MIN (2-3 servings) / 40 MIN (4-6 servings) / 45 MIN (6-8 servings)

Ingredients:

• 2-3 Servings: 2 (12-oz) cans (or 3 cups) soda
• 4-6 Servings: 4 (12-oz) cans (or 6 cups) soda
• 6-8 Servings: 5 (12-oz) cans (or 7 1/2 cups) soda

Directions:

1. Pour soda into the vessel.
2. Select SLUSH. Preset will start at the recommended temperature for ideal texture. If desired, adjust temperature.
3. Once frozen drink reaches optimal temperature, unit will beep. Dispense and enjoy.

Use any of the following sodas: cola, orange, lemon-lime, cream, root beer, ginger ale, grape, or any other soda.

TIPS: For best results, chill liquid before adding to the unit. Diet soda (or soda made with sugar alternatives) will NOT work in this unit.

NOTE: For easier cleaning, DO NOT turn off preset until all frozen drink has been dispensed.

Kickstarter: Frozen Mango Margarita

Total Time: 30 MIN (2-3 servings) / 45 MIN (4-6 servings) / 50 MIN (6-8 servings)

Ingredients:

• 2-3 Servings: 2 cups mango margarita mix, 1/3 cup water, 1/3 cup lime juice, 1/3 cup tequila
• 4-6 Servings: 4 cups mango margarita mix, 2/3 cup water, 2/3 cup lime juice, 2/3 cup tequila
• 6-8 Servings: 5 cups mango margarita mix, 3/4 cup water, 3/4 cup lime juice, 3/4 cup tequila

Directions:

1. Pour all ingredients into the vessel.
2. Select SPIKED SLUSH. Preset will start at the recommended temperature for ideal texture. If desired, adjust temperature.
3. Once frozen drink reaches optimal temperature, unit will beep. Dispense and enjoy.

MAKE IT A MOCKTAIL: Swap out the tequila for zero-proof tequila and run on the SLUSH program. The preset will start at the default level-adjust temperature control to illuminate 5 bars.

TIPS: For best results, chill liquid before adding to the unit.

NOTE: For easier cleaning, DO NOT turn off preset until all frozen drink has been dispensed.

Using the Control Panel

Presets

5 unique presets that use RapidChill Technology to determine the perfect temperature for the ideal frozen drink.

Temperature Control Setting

Each preset will start at a default/optimal temperature for ideal texture. If desired, adjust the temperature for your perfect frozen drink texture.

• For sippable frozen drinks, decrease the temperature level by pressing the bottom arrow on the control panel.
• For thicker, colder frozen drinks, increase the temperature level by pressing the top arrow on the control panel.

Temperature Progress: Temperature Control LEDs pulse showing progress to reach temperature. Unit will beep and LEDs will remain solid once complete.

Troubleshooting Tips

• Recipe Not Slushing? If your recipe has not reached the desired texture after 60 minutes, use the Temperature Control Setting to increase the temperature one level. Wait 10-15 minutes to test the recipe. If the texture still isn't what you desire, increase temperature by one level again. Repeat until desired texture is achieved.
• Slush Not Dispensing? For the best dispensing experience, fill the unit to the max fill line and ensure the unit is running. For a smoother dispense experience, decrease the temperature level by pressing the bottom arrow on the control panel. More sippable frozen drinks will dispense smoother.

Alerts

• Low-Sugar Alert: Temperature Control LEDs will flash one at a time in descending order, preset LEDs will flash, and the unit will beep every minute for 15 minutes. If a drink does not meet minimum requirement of total sugar: Add 1-2 tablespoons flavored syrup, juice, sugar, date sugar, coconut sugar, maple syrup, agave, simple syrup, or honey per serving. Combine additional sugar with the base prior to pouring into unit.
• High-Alcohol/High-Sugar Alert: Temperature Control LEDs will flash one at a time in ascending order, preset LEDs will flash, and the unit will beep every minute for 15 minutes. If a drink exceeds the maximum alcohol and sugar amounts: Add 1/4 cup water; soda; tonic water; seltzer; or plain, chilled coffee/tea per serving to dilute the input.

Refer to the Inspiration Guide for more sugar and alcohol guidelines.