2BOOM BX311 Small Sound Cannon Speaker with Light

Charging Instructions

For best results, fully charge the speaker before use.

• Connect the USB cord (included) to the charging port of the speaker and insert the other end into a port on your computer or similar power source.
• The RED LED turns on indicating that the battery is being charged. Once it is fully charged, the Red LED will turn off. It takes 5 to 7 hours to fully charge the speaker.

Note: In order to have better battery life, please do not charge for over 6 hours. Overcharging the speaker can adversely impact the battery life. Turn off the speaker when it's not in use to save battery power.

Turning on/off the speaker

• To turn “ON”, press the “ON/OFF” switch to the ON position.
• To turn “OFF”, press the “ON/OFF” switch to the OFF position.

Pairing the speaker with Bluetooth devices

• Turn ON the speaker, the LED display will show “BLUE”, the speaker is now in pairing mode.
• Turn on the Bluetooth on your mobile phone or other Bluetooth enabled devices.
• It will search for various devices.
• The pairing name is "5B536BT". Search and pair with this device.
• If required, enter the password "0000" to confirm to finalize pairing.
• Once paired successfully, you would hear an indication tone. Select your favorite song at the Bluetooth device and music would now stream through Bluetooth speaker.
• If you fail to pair it within the time frame or you want to pair it with a new device, please follow the steps outlined above.

Note: Speaker will automatically pair with previously paired devices. If you insert an SD card or USB flash drive while using the Bluetooth function, the speaker will automatically switch to the USB/SD function. To return to the Bluetooth function, press the MODE button.

Listening to Music wirelessly

Please ensure that your device is paired with the Bluetooth speaker successfully.

Note: An indication tone will alert you when the volume is adjusted to the maximum level.

AUX function of the speaker

• Turn on the speaker.
• Press the "MODE" button until Aux mode is selected; the LED display will show "Lod" first and then “LINE”.
• Plug the 3.5mm auxiliary cable (included) into the Aux input of the speaker, and the other end of the cable connects to the audio device (such as cell phone / computer / tablet etc.).
• Select your favorite song at the source device and play.

Note: Functions like skip backward, skip forward etc. can be only controlled through source devices, while playing music in Auxiliary mode.

Listening to Music using Micro SD card slot

1. Turn on the speaker.
2. Insert Micro SD(TF) card or USB flash drive into the card slot. The LED display will show "Lod" first and then “SD” or “USB”. Music will stream automatically.
3. Press Skip backward or Skip forward to move forward or backward on your playlist.
4. Press Play/Pause button to Play or Pause a track.

Note: While using Bluetooth, if you insert a Micro SD(TF) card or USB flash drive, the speaker will automatically switch to the Micro SD(TF)/USB function. You can press the MODE button again to select the Bluetooth mode.

FM RADIO

1. Turn on the speaker.
2. Insert the auxiliary cord (included) into the auxiliary port. Leave the other end of the cord open; the auxiliary cord serves as an FM antenna while in FM radio mode.
3. Press the “MODE” button until FM mode is selected; the LED display will show “Lod" first and then the FM frequency.
4. Press the Play/Pause button once and the device would automatically search and store all the FM radio stations.
5. Press Skip backward or Skip forward button to change the FM radio stations.

TIPS!!

1. Press the “MODE” button to switch different functions of the speaker. The modes appear in the following sequence: Bluetooth / SD-USB/FM radio/Aux-in.
2. When the unit is not in use, turn off the device to save the battery power.
3. Do not overcharge the unit; every charge should not exceed 8 hours.

Using the microphone (Microphone not included)

1. Turn on the speaker.
2. Insert the plug of the microphone (not included) into the microphone input of the speaker.
3. Turn on the microphone.
4. Long press the Skip backward or Skip forward button and press the Mic volume button to adjust the desired output level.
5. You are now ready for Karaoke.

Do's and Don'ts

• Do not play music at excessive levels, as damage to hearing and/or equipment may result.
• Do not use outdoors in wet or in damp surroundings.

Care and Maintenance

Read the following recommendations before using the Bluetooth speaker. Following these, you will be able to enjoy the product for many years.

• Do not expose the Bluetooth speaker to liquid, moisture or humidity to avoid the product's internal circuit being affected.
• Don't use abrasive cleaning solvents to clean the device.
• Do not expose the device to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
• Don't dispose of the device in a fire as it will result in an explosion.
• Don't expose the device to contact with sharp objects as this will cause scratches and damage.
• Don't let the device fall on the floor. The internal circuit might get damaged.
• Don't attempt to disassemble the device as it may get damaged if you are not professional.

Specifications

(Note: Battery life & charging time may vary based on usage & types of devices used.)