Amibot Signature Urban Quick Guide
Welcome to your Amibot Signature Urban. This guide will help you get started.
Step 1: Prepare the Robot
There are two options for preparing the robot:
- Option A: Water Tank Installation
- Open the water tank cover on the robot.
- Insert the water tank.
- Close the water tank cover.
- Option B: Dustbin Installation
- Open the dustbin cover on the robot.
- Insert the dustbin.
- Close the dustbin cover.
Step 2: Power On
Ensure the robot is placed on a flat surface. Locate the power button and press it to turn the robot on.
Step 3: Charging Station Setup
Place the charging station against a wall on a level surface. Ensure there is at least 1 meter of clearance on both sides and 2 meters in front of the charging station for optimal robot navigation.
Step 4: Connect to Power
Connect the power adapter to the charging station and plug it into a power outlet. The robot will automatically detect the charging station and begin charging when placed nearby.
Step 5: Place Robot on Charging Station
Gently place the robot onto the charging station, aligning the charging contacts. The robot will indicate it is charging.
Step 6: Start Cleaning
Once fully charged, the robot is ready to clean. Press the start button to begin the cleaning cycle.