Step 1: Download the Amibot App
To get started with your Amibot Animal MOTION robot vacuum, download the dedicated mobile application. You can find it on the major app stores.
Available on: [App Store] or [Google Play Store]
Step 2: Launch and Navigate the App
Open the Amibot app on your smartphone or tablet. The initial screen you'll see is the 'AMIBOT HOME' interface. If necessary, search for 'AMIBOT HOME' within the app.
After accessing the home screen, navigate to the 'Account' section.
[App Screen: Showing AMIBOT HOME interface, then Account screen]
Step 3: Initiate Robot Connection
Locate the power button on your Amibot Animal MOTION robot. Press this button to begin the pairing process with the app.
[Robot Image: Hand pressing the power button on the robot]
[Next Step Indicator] →
Step 4: Robot Initialization
In the Amibot app, you will be presented with an 'Initialization' screen. Tap the 'Confirm' button to proceed with the setup.
[App Screen: Initialization screen with a Confirm button]
Step 5: Robot Status Indicators
During initialization, the robot will provide audible feedback. Expect it to take approximately 6 seconds, followed by two beeps and potentially a voice prompt confirming its status.
[Robot Status: 6 sec. | Beep x2 | Voice]
[Next Step Indicator] →
Step 6: Wi-Fi Network Configuration
To connect your robot to the internet, you need to configure its Wi-Fi settings. Select your preferred Wi-Fi network (2.4GHz or 5GHz) from the list. Enter your Wi-Fi password accurately and then tap 'Confirm'.
[App Screen: Wi-Fi selection interface showing 2.4GHz/5GHz options, password field, and Confirm button]
[Next Step Indicator] →
Step 7: Connection Confirmation
Once the Wi-Fi connection is successfully established, the Amibot app will display a confirmation message. Your Amibot Animal MOTION robot is now connected and ready for use.
[App Screen: Confirmation of successful connection, showing 'AMIBOT Animal Motion' and a checkmark]
