Belkin BoostCharge Power Bank 26K with 32W PD PPS

Important Safety Instructions

WARNING: When using this product, basic precautions should always be followed, including the following:

• Read the operating instructions, including charging instructions and information on the minimum and maximum operating temperatures supplied with this power bank.
• To reduce the risk of injury, close supervision is necessary when the product is used near or by children.
• For indoor and dry location use only. Do not expose power bank to rain or snow. Keep the power bank away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids.
• Use of a power bank in a manner not recommended in these instructions may result in a risk of fire or injury to persons.
• The power bank will generate heat when charging. Always charge in a well-ventilated area. Do not charge under pillows, blankets, inside a purse or on flammable surfaces.
• Do not use the power bank if visible defects are observed or if it has been wet or damaged or modified to prevent against electric shock, explosion, and/or injury. Contact the dealer or authorized agent or Belkin for assistance.
• Do not disassemble, open, microwave, incinerate, paint, insert foreign objects into the power bank.
• Do not use the power bank in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons.
• Do not expose the power bank to fire or excessive temperature. Exposure to fire or temperature above 100°C may cause explosion.
• Do not subject the power bank to mechanical shock such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on the power bank.
• Do not short-circuit the power bank or store it in a receptacle where it may be short-circuited by other metallic or conductive objects.

Operating Conditions: 0° C to 40° C

Product Specifications

Product Name: BOOSTCHARGE Power Bank 26K with 32W PD PPS

Model No: BPB016

Input (C1/C2): 5V 3A, 9V 2.22A, 12V 1.67A

Output (C1/C2): 5V 3A, 9V 2.22A, 12V 1.67A, PPS 3.3V-6V 3A, 3.3V-11V 1.8A

Output (A1/A2): 5V 2.4A

Total Output:

• (A1+A2): 5.0V 2.4A (12.0W Max.)
• (C1+C2): 5.0V 3.0A (15.0W Max.)
• (C1/C2+A1/A2): 32W Max.

Capacity: 96.2Wh, 7.4V, 13000mAh

Compliance Information

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

Innovation, Science and Economic Development Canada Statement

This device complies with ICES-003 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) This device may not cause interference, and 2) This device must accept any interference, including interference that may cause undesired operation of the device.

This digital apparatus complies with CAN ICES-003(B) / NMB-003 (B).

Simplified EU Declaration of Conformity

Belkin International, Inc. declares that this product conforms with EMC Directive 2014/30/EU, Low Voltage Directive 2014/35/EU, and (EU) 2015/863 RoHS Directive 2011/65/EU (Recast). The full text of the EU declaration of conformity is available at: www.belkin.com/doc

UKCA conformity

• Safety Directive: Electrical Equipment(Safety) Regulations 2016
• EMC Directive: Electromagnetic Compatibility Regulations 2016(S.I.2016/1091)

Disposal Information for User

For information on product disposal, please refer to http://www.belkin.com/uk/weee-regulations/

Pursuant to and in accordance with Article 14 of the Directive 2012/19/EU of the European Parliament on waste in electrical and electronic equipment (WEEE). The barred symbol of the rubbish bin shown on the equipment indicates that, at the end of its useful life, the product must be collected separately from other waste.

Therefore, any product that has reached the end of its useful life must be given to waste disposal centers specializing in separate collection of waste electrical and electronic equipment or given back to the dealer when purchasing a new WEEE, pursuant to and in accordance with Article 14 as implemented in the country. Adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environment and health and optimizes the recycling and reuse of components making up the electronic equipment. Abusive disposal of the product by the user involves application of the administrative sanctions according to the laws in force.