GS200 User's Manual

Appearance Description

The GS200 smart glasses feature a design with the following components:

• Microphone: Integrated into the frame.
• Charging indicator: A visual indicator for charging status.
• Speaker: Built into the arms of the glasses, positioned near the ears.
• Charging contacts: Located on the frame for power connection.
• Touch area: A functional area on the exterior of the right temple arm for user interaction.

Tip: Only the right mirror leg touch area operation is supported.

Operation Method

• Power on: Automatic power-on upon wearing.
• Shut down: Automatic shutdown after 10 seconds of inactivity.
• Play music: Single click to Play/Pause, double-click to switch songs.
• Bluetooth call: Single click to answer/end a call, long press to reject a call.
• Siri: Press and hold for 3 seconds to activate the Siri voice assistant.

Charging Instructions

Connect the charging cable to the glasses and plug the USB connector into a power source such as a computer, power bank, or a standard USB adapter. Full charge time is approximately 40 minutes.

Bluetooth Pairing

On your mobile phone, enable Bluetooth and search for the glasses' Bluetooth name, "XXX". Select and connect, then confirm pairing on your mobile phone.

Product Parameters

• Speaker: Hi-Fi
• Microphone: Voice Noise Cancellation
• Product Type: Smart Glasses
• Bluetooth: Bluetooth 5.0
• Music playing time: Approximately 3 hours
• Product weight: 37g
• Charging time: Approximately 40 minutes
• Product size: 162.4*138.5*43MM
• Battery capacity: 150mAh

Main Functions

• Music playback
• Bluetooth calling

Precautions

• Do not subject the main unit to severe impact.
• Avoid contact with chemicals such as benzene or thinner.
• Keep away from strong magnetic fields and high-voltage stations.
• Avoid direct sunlight or proximity to heat appliances.
• Do not disassemble, repair, or modify the product yourself.
• Please dispose of packaging, batteries, and old electronic products responsibly and sorted correctly.

Warranty Information

FCC Compliance Information

FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.