GS260 Smart Glasses User Manual

1. Appearance Description

The GS260 smart glasses are designed with a symmetrical distribution of components. The frame houses the buttons, microphone, and indicator light. Charging contacts and a speaker are also integrated into the design.

Key components:

• Microphone
• Indicator light
• Charging contact
• Speaker

2. Gesture Operation

Control your GS260 smart glasses with simple gestures:

• Power On/Off: Long press both left and right buttons simultaneously for 3 seconds.
• Reject Call: Long press either the left or right button during an incoming call.
• Answer/Hang Up Call, Play/Pause Music: Single click either the left or right button.
• Previous Song: Double-click the left button.
• Next Song: Double-tap the right button.
• Activate Voice Assistant (Siri): Triple-tap the left button.

3. Charging Instructions

To charge the GS260 smart glasses:

• Connect the charging cable to the glasses.
• Plug the USB end into a standard charger.
• Full charge takes approximately 1.5 hours.

Charging time: Approximately 1.5 hours.

4. Wireless Pairing

Connect your GS260 smart glasses to your device:

1. Turn on wireless on your mobile phone.
2. Search for the glasses' name, "GS260".
3. Click "Connect" on your phone.
4. Click "Pair" on your phone to complete the connection.

5. Product Parameters

• Product Type: Smart Glasses
• Wireless Connection: Bluetooth 5.3
• Battery Life: Approximately 3 hours
• Charging Time: Approximately 1.5 hours
• Speaker: High fidelity
• Microphone: Voice noise reduction
• Battery Capacity: 210mAh

6. Main Functions

• Music playback ♫
• Wireless calls ?

7. Precautions

Please observe the following precautions to ensure safe and proper use of your GS260 smart glasses:

• Do not strike the glasses forcefully.
• Avoid contact with chemicals such as benzene and thinners.
• Keep away from strong magnetic fields and electric shock stations.
• Avoid direct sunlight and heating appliances.
• Do not attempt to disassemble, repair, or modify the product yourself.
• Dispose of packaging, batteries, and old electronic products responsibly according to local regulations.

FCC Compliance Information

FCC Warning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body.