Defender SAVAGE ART. 64808, 64834
GAMING CHAIR
User manual
Parts and Hardware
The following parts and hardware are included for assembly:
| ID | Description | Quantity | Diagram Reference |
|---|---|---|---|
| 1 | Seat Base | 1 | Diagram 1 |
| 2 | Backrest Support | 1 | Diagram 2 |
| 3 | Armrests (Left & Right) | 2 | Diagram 3 |
| 4 | Five-Star Base | 1 | Diagram 4 |
| 5 | Gas Lift Cylinder | 1 | Diagram 5 |
| 6 | Control Mechanism | 1 | Diagram 5 |
| 7 | Height/Tilt Adjuster | 1 | Diagram 7 |
| 8 | Casters (Wheels) | 5 | Diagram 4 |
| 9 | Backrest Cushion | 1 | Diagram 9 |
| A | M6x20mm Screw | 4 | Diagram A |
| B | M6x35mm Screw | 3 | Diagram B |
| C | M8x30mm Screw | 5 | Diagram C |
| D | Allen Key (Large) | 1 | Diagram D |
| E | Allen Key (Small) | 2 | Diagram E |
| F | Washer | 4 | Diagram F |
| G | Washer | 1 | Diagram G |
Assembly Instructions
Follow these steps to assemble your Defender SAVAGE gaming chair:
Step 1: Prepare the Base
Assemble the five-star base (4) by inserting the casters (8) into the ends of each leg. Place the gas lift cylinder (5) into the central opening of the five-star base (4). The wider end of the cylinder should be at the bottom.
[Diagram 4: Shows the five-star base with five wheels being inserted. Diagram 5: Shows the gas lift cylinder being placed into the center of the base.]
Step 2: Attach Mechanism to Seat Base
Mount the control mechanism (6) to the underside of the seat base (1) using three M6x35mm screws (B). Ensure the mechanism is oriented correctly, typically with the lever facing forward, as indicated in the diagram.
[Diagram 1: Shows the seat base. Diagram 5: Shows the control mechanism being attached to the underside of the seat base with screws.]
Step 3: Attach Armrests
Attach the left and right armrests (3) to the sides of the seat base (1) using four M6x20mm screws (A) and four washers (F). Use the large Allen key (D) for tightening.
[Diagram 3: Shows armrests being attached to the seat base with screws and washers.]
Step 4: Attach Backrest
Attach the backrest support (2) to the rear of the seat base (1) using five M8x30mm screws (C) and one washer (G). Use the small Allen key (E) for tightening.
[Diagram 2: Shows the backrest. Diagram 6: Shows the backrest being attached to the seat base with screws and a washer.]
Step 5: Connect Seat Assembly to Base
Carefully lower the assembled seat unit (seat base with attached backrest and armrests) onto the gas lift cylinder (5) protruding from the five-star base (4). The connection should be secure. The chair will lower onto the cylinder as weight is applied.
[Diagram 8: Shows the assembled seat unit being placed onto the gas lift cylinder on the base.]
Step 6: Install Height/Tilt Adjuster
Install the height/tilt adjuster (7) into the control mechanism (6) on the underside of the seat base (1). This lever is used to adjust chair height and tilt.
[Diagram 7: Shows the adjuster lever. Diagram 5: Shows the location of the control mechanism.]
Step 7: Final Check
Ensure all screws are tightened and the chair is stable. The backrest cushion (9) is shown in the final illustration (Diagram 9) and can be attached as needed.
[Diagram 9: Shows the fully assembled Defender SAVAGE gaming chair.]
Warranty Information
Warranty Exclusions
Warranty service is not provided in the following situations:
- Expiration of the warranty period (warranty period is settled from the date of sale to the end user).
- Incorrect filling in of the warranty card.
- Incorrect plug in to power grid.
- Breach to safety of guarantee seals, fixing joint assemblies of the case; presence of elements of opening on outside and inside parts of the product.
- If the product designed for household use was used for professional purposes.
- Damage due to penetration of foreign objects, substances, liquids or insects inside the product.
- Damage due to breach to normal work of supply network – 220V +/- 10%. (except of automatic voltage regulators)
- If the product was opened and repaired by a person unauthorized for that by the dealer.
- Incorrect operation or careless handling.
- Damage to the product due to natural disasters.
- Presence of elements indicating mechanical damage (fall, hit).
- Disability of connected devices of other producers.
Manufacturer and Importer Details
Manufacturer: Anji Jifang Furniture Co., Ltd
Address: 4th Floor, Bada Logistics Building, Logistics Park, Sunshine Industrial Zone, Dipu Town, Anji County, Zhejiang Province, China. Made in China.
EU Importer: Defender Technology OÜ
Address: Betooni str 11, 11415, Tallinn, Estonia.
Website: www.defender-global.com
Russian Importer: OOO "TD Kompaniya Defender"
Address: 127030 Moscow, Sushchevskaya str., 27, bldg. 2, floor 3, room III, office 63.
Website: www.defender.ru
Ukrainian Manufacturer: Anji Jifang Furniture Co., Ltd.
Ukrainian Importer: TOV "Proizvodstvennoe Predpriyatie 'Promyslovye Sistemy'"
Address: Kirillovskaya str., 40A, Kyiv, 04080, Ukraine.
Website: www.defender-global.com
Product Lifespan and Storage
Warranty Period: 6 months
Service Life: 6 months
Shelf Life: 5 years
Storage Conditions: Store in a dry, ventilated room at temperatures from -5 to +40 °C and relative humidity not exceeding 80%.
The EAC mark (Евразийское соответствие) indicates compliance with Eurasian Economic Union technical regulations.
