Defender Forsage GTR Gaming Wheel - Operation Manual
Brand: Defender
Model: Forsage GTR
1. Installation
- Connect the pedals.
- Connect the USB plug.
- Wait until Windows installs the driver.
- Secure the steering wheel on the table with a clamp.
Description of Components:
- Wheel: X Axis
- Bumpers (LT/RT): Y Axis
- Pedals: LT/RT, Y Axis
- Gear shift lever: 1/2
- D-PAD: D-PAD
- Buttons 1-12
- MODE button
- Mode LED
Mode Switching:
- Short press MODE button: Changes Analog/Digital mode.
- Press and hold MODE button (3 sec): Switches between XInput and DInput modes.
2. Functions
Button Mapping:
| Button | PC XInput | PC DirectInput |
|---|---|---|
| Left Bumper (LB) | X | 1 |
| Right Bumper (RB) | B | 2 |
| Buttons 1, 2, 3, 4 | 1, 2, 3, 4 | 1, 2, 3, 4 |
| Buttons 5, 7, 9, 11 | 5, 7, 9, 11 | 5, 7, 9, 11 |
| Buttons 6, 8, 10, 12 | 6, 8, 10, 12 | 6, 8, 10, 12 |
| D-PAD | D-PAD | D-PAD |
| Wheel Axis | X Axis | X Axis |
| Pedals (Accelerator/Brake) | Y Axis | Y Axis |
| Gear shift lever | 1/2 | 1/2 |
3. Sensitivity Configuration
LED Indicator:
- Fast flickering: Long press MODE button for 3 seconds (for XInput mode).
- Press: Indicates an action.
- Slow flickering: Pressing a control to restore its function.
- Turns off: Function restored or reset.
Sensitivity Levels:
- High sensitivity
- Middle sensitivity
- Low sensitivity (default)
To adjust sensitivity, press and hold buttons 9 and 10. Then, press the desired control (pedal, gear lever, or bumper) and select the sensitivity level by pressing button 1 through 8.
4. Changing Button Functions
You can assign the functions of the pedals, gear lever, and bumpers to buttons 1-8.
- Press and hold buttons 9 and 10. The LED will flicker rapidly.
- Press the pedal, gear lever, or bumper whose function you want to change. The LED will flicker slowly.
- Press the desired button (1-8) to assign the function. The LED will turn off, indicating the function has been assigned.
5. Restoring Functions
You can restore the default functions of the pedals and bumpers.
To restore functions of one control:
- Press and hold buttons 9 and 10. The LED will flicker rapidly.
- Press the control you wish to restore. The LED will flicker slowly.
- Press the same control again. The LED will turn off, indicating the function has been restored.
To restore functions of all controls:
- Press and hold buttons 9 and 10. The LED will flicker rapidly.
- Press button 10 and hold it until the LED turns off. This will restore all functions to their defaults.
ATTENTION: Disconnecting the gaming wheel or restarting the computer will reset the gaming wheel settings to default.
Warranty Information
The product comes with a 12-month warranty from the date of sale. Please ensure the seller stamps and dates the warranty card upon purchase. Keep the warranty card for future reference.
Warranty Terms:
- The user confirms they have read and understood the warranty terms.
- No claims are made regarding the product's appearance or completeness at the time of purchase.
- Record of warranty repair (date of receiving, date of returning the product) should be noted by the service center.
