Magene AT Series Smart Bike Headlight

Initial Setup Warning

⚠️ For first-time use, please unlock the mode first. Long press the button for 3 seconds to unlock.

Package Contents

The package includes the following items:

1. Magene AT Series Smart Bike Headlight unit (also referred to as "Front Light" or "前灯").
2. Handlebar mounting bracket with a fixing strap.
3. GoPro-style mounting adapter.
4. Rail-style mounting adapter.
5. USB-C charging cable with an angled connector.
6. USB-C charging cable with straight connectors.
7. A small screw.
8. A screwdriver.
9. An Allen wrench.

Installation

This product offers two installation methods: UP mounting and Down mounting.

UP Mounting

1. Step 1: Assemble the fixing strap and nut onto the mounting bracket.
2. Step 2: Attach the assembled bracket to the bicycle handlebar.
3. Step 3: Secure the headlight onto the mounted bracket.

Down Mounting

1. Step 1: Position the mounting bracket on the handlebar.
2. Step 2: Insert the strap through the bracket.
3. Step 3: Fasten the strap to secure the bracket.
4. Step 4: Attach the headlight to the bracket.
5. Step 5: Ensure the headlight is properly seated on the bracket.
6. Step 6: The headlight is now mounted in the down position.

Light Modes

The AT Series lights offer various modes with different brightness levels and durations.

AT1200 Model

AT1600 Model

*Endurance data was measured in accordance with ANSI/NEMA FL 1-2009 standards. The test was conducted under indoor temperature of 25°C and wind speed of 25KM/H conditions. The actual range time will vary with temperature and ventilation conditions.

Product Specifications

Instructions and Features

Basic Controls

• To prevent accidental activation during transport, the AT series lights are in lock mode. Long press the power button for 3 seconds to release the lock.
• Lights may continue to broadcast in the off state; broadcast is off in locked state.
• Long press the power button for 1 second to switch the light on or off. Click the power button to cycle through modes: Low Light -> Medium Light -> High Light -> Daytime Blinking -> Nighttime Blinking -> Breathing.
• Mode Memory: After powering on, the light will revert to the mode it was in before the last power off.

LED Indicator Status

Temperature Control Protection

AT series lights are equipped with an intelligent temperature control system. This system automatically reduces brightness in case of overheating to protect the equipment and prolong its service life.

Reverse Charging

AT series lights can charge other devices, such as bike computers and phones.

Intelligent Connection

The AT series lights support the ANT+ standard protocol. Connecting with a compatible bike computer allows for intelligent control of the lights during rides, including features like SOS mode (supported by some code meters) and other functions.

Customized Mode

Connect the AT series lights to the "Naughty Deer Sports" APP via Bluetooth to enable customized light modes (10 kinds), set up light automation, upgrade firmware, and access other features.

Performance Parameters

Warnings

Failure to observe the following potential hazards may result in serious injury or even fatal accidents.

Attention Warning

• Proper use of the device can enhance your cycling experience. However, improper use may result in distractions and serious personal injury.
• Use the device only for quickly obtaining information. Always pay attention to your surroundings and do not allow the device to distract you for extended periods.
• Over-focusing on the device may cause you to overlook obstacles or dangers. Use this device at your own risk and operate it reasonably and cautiously.

Cycling Warning

• Please maintain your best attention and judgment to cycle in the safest way possible.
• Ensure your bicycle and all its components are well-maintained and correctly installed.

Battery Warning

Failure to comply with the following guidelines may shorten the battery life or lead to equipment damage, fire, chemical burns, electrolyte leakage, and risk of injury.

• Do not disassemble, modify, pierce, squeeze, or damage the battery.
• Do not expose the device and battery to flames, explosions, or other hazards.
• Do not store the device in a high-temperature environment, such as a dryer or a car parked under direct sunlight.
• Do not immerse the battery in water or other liquids.
• Avoid frequent excessive charging operations.
• Do not charge the battery near a source of heat or under extreme hot conditions.
• Strictly follow the charging requirements to prevent danger caused by excessive current.
• If the product is not in use for a long time, it is recommended to fully charge the battery for storage to extend its life span.

Warranty Clause

Three Guarantees

• The product has passed strict quality inspection. Free repairs are provided for failures caused by product quality problems during the warranty period under normal use, according to warranty card instructions.
• Within 7 days from the date of purchase (inclusive), unconditional return and exchange are available for quality problems with the product itself.
• The warranty period for the product host is 12 months from the date of purchase, and 3 months for other accessories, based on the warranty time of the electronic warranty card. Local laws and regulations shall prevail in case of conflict.
• Product warranty repairs require the use of original packaging and designated logistics transportation. Otherwise, the user will bear transportation costs or losses.

Situations Not Within the Scope of Warranty

• Exceeding the warranty period.
• Damage caused by improper use, maintenance, and storage.
• Product damage caused by not following the instruction manual or installation instructions.
• Unauthorized repairs, misuse, collisions, negligence, abuse, liquid entry, accidents, modifications, or unclear use of non-product accessories.
• Absence of an electronic warranty card or valid invoice.
• Product number or code on the electronic warranty card does not match the physical product.
• Failures and damage caused by factors other than the product's own design, manufacturing, and quality issues.
• Normal wear and tear, dirt (scratches), and damage caused by human factors (contact with chemicals, sharp objects, falling, squeezing).
• Damage caused by force majeure.

Product After-Sales Service Period

• Magene provides lifetime after-sales service for products.
• After the product warranty period expires, a cost fee will be charged for product repairs, and only labor and parts costs will be charged for human damage repairs.
• Please provide accurate name and contact information when sending your device for repairs so the repair center can contact you promptly for pickup.

Magene reserves the right to modify and interpret the above content.

Declarations and Compliance

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

CE Declaration of Conformity

Hereby, Qingdao Magene Intelligence Technology Co., Ltd. declares that this product is in compliance with the Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://magenefitness.com/certificate.html

UK Declaration of Conformity

Hereby, Qingdao Magene Intelligence Technology Co., Ltd. declares that this product is in compliance with The Radio Equipment Regulations 2017. The full text of the declaration of conformity is available at the following internet address: https://magenefitness.com/certificate.html

Recycling and Licenses

WEEE (Waste Electronic Electric Equipment) - European Directive 2012/19/EU

The symbol [♻️] on the product or its packaging indicates that this product must not be disposed of with household waste. It is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. Separate collection and recycling will help conserve natural resources and ensure it is recycled in a manner that protects human health and the environment. For more information, contact your local city office, household waste disposal service, or the shop where you purchased the product.

Batteries

In accordance with the Battery Directive, used batteries should not be disposed of in domestic waste. Dispose of your batteries in the collection containers specific for this purpose in retail stores.