Lorex 2K Wire-Free Camera U424AA Series Quick Start Guide
Thank you for your purchase! How to get started with your 2K Wire-Free Camera.
Safety Precautions
- Read this guide carefully and keep it for future reference.
- Follow all instructions for safe use and handling of the product.
- Operate the camera within the specified temperature, humidity and voltage and use manufacturer approved accessories.
- Do not disassemble the camera.
- Do not point the camera directly at the sun or a source of intense light.
- Periodic cleaning may be required. Use a damp cloth only. Do not use any harsh, chemical-based cleaners.
Disclaimers
- A regulated UL / CSA approved power supply is required for use with this camera (included). Use of a non-regulated, non-conforming power supply can damage this product and voids the warranty.
- Not intended for submersion in water. Installation in a sheltered location recommended.
- Audio recording without consent is illegal in certain jurisdictions. Lorex Corporation assumes no liability for use of its products that does not conform with local laws.
- This camera includes an Auto Mechanical IR Cut Filter. When the camera changes between Day/Night viewing modes, an audible clicking noise may be heard from the camera. This clicking is normal and indicates that the camera filter is working.
- Some channels on the 5GHz Wi-Fi band are restricted in Canada. This means certain Wi-Fi networks may not be available to connect to during setup.
Section 1: Package Contents
The package contains the following items:
- 2K Wire-Free Security Camera (x1)
- Camera Antenna (x1)
- Re-chargeable Battery Pack (x1)
- Charging Adapter & Cable (x1)
- Allen Key (x1)
- Drill Bit (x1)
- Screwdriver (x1)
- Anchors (x4)
- Screws (x4)
- Security Screws (x2)
- Mounting Bracket (x1)
Section 2: Overview
Front View:
- 1. Detachable antenna
- 2. Warning light
- 3. PIR sensor
- 4. Locking screw
- 5. Power port
- 6. Battery charging indicator
Side View:
- 7. Fastener
- 8. Pairing button
- 9. Adjustment ring
- 10. Battery release tabs (x2)
- 11. Mounting plate slots (x2)
Dimensions:
- Height: 4.8" (121mm)
- Width: 5.2" (131mm)
- Length: 2.9" (73mm)
Section 3: Before You Start
The camera battery comes partially charged. Please, fully charge the battery before use and setup. You can charge the battery pack inside or outside of the camera.
To charge the camera battery pack:
- Remove the protective film on the battery contacts and camera lens.
- Using the provided battery charging adapter and cable, connect the camera to a nearby outlet.
Camera Battery Charging Indicator:
| Green (solid) | Fully charged |
| Red (solid) | Charging |
Battery Charging Time:
| 2-cell | 2-4 hours |
| 3-cell | 3-5 hours |
Section 4: Setup
- Turn the adjustment ring counter-clockwise to loosen and angle the camera.
- Screw in the antenna.
- Insert the battery pack into the bottom of the camera.
Note: You will hear a 'beep' when the power pack is properly inserted. If you do not hear this alert, remove the power pack by pushing in on the battery release tabs then re-insert.
Section 5: Pairing to the App
- Download the Lorex Cirrus app by scanning the QR code.
- Open the Lorex Cirrus app and sign in or create an account.
- From the Home screen, select your recorder from the list of devices.
- Tap any free channel marked with a [Wi-Fi icon].
- Tap Pair.
- Press and hold the pairing button on the back of the camera until the red LED lights stop flashing, then release the pairing button. A 'Pairing success!' message will appear on screen. If you do not see this message, repeat steps 3-6.
Optional: Pairing on the Recorder
Click the [add channel icon] in an empty channel screen. After you press and hold the pairing button on the back of your camera, you will have 30 seconds to pair the camera.
Section 6: App Live View
The app displays the live view of your camera. Key features include:
- Device casting
- Settings
- Favorite group
- Name display
- Device name
- Search / playback video
The bottom of the screen shows controls for snapshot, record, view, audio, and talk.
Section 7: Mounting
- Set the mounting bracket to the desired mounting position.
- Mark holes through the mounting bracket.
- Using the included drill bit, drill holes where marked.
- Using the included screwdriver, secure the bracket with the provided mounting screws.
- Optional: If you are mounting the camera into drywall, use the provided drywall anchors.
- Orient the camera fastener upwards, then align the camera's mounting plate slots to the tabs in the mounting bracket. Push in and slide down to secure in place.
- Insert the security screw through the fastener on the top of the camera and mounting bracket, then tighten with the screwdriver.
- Tighten the pre-installed locking screw using the screwdriver.
Note: To remove the battery pack in the future, loosen the locking screw. - Adjust the camera to the desired position. Tighten the adjustment ring clockwise.
Need help?
Visit help.lorex.com for up-to-date information and resources:
- Download product guides
- Watch how-to-videos
- Find related troubleshooting tips & FAQs
Register your product
Please see our full Terms of Service and Limited Hardware Warranty Policy at lorex.com/warranty.
FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Copyright © 2021 Lorex Corporation. As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE. All rights reserved.
Lorex Support: Help Center
Security Cameras & Systems | Lorex USA – Lorex Corporation
