Logo: G21
Manual: 5-Drawer Tool Trolley G21 Cooper 5
Assembly Instructions
Step 1: Initial Setup
The main trolley body is presented. Two side panels are shown with arrows indicating they attach to the sides. Two sets of wheels are depicted below the trolley, with upward-pointing arrows suggesting their attachment to the base.
Step 2: Attaching Wheels
This step illustrates the attachment of four caster wheels to the bottom of the trolley. Multiple screws are shown for each wheel, indicating they are secured by screws.
Step 3: Installing the Handle
A side handle is shown being mounted onto the trolley. Screws are indicated for fastening the handle securely.
Step 4: Fitting the Side Tray
A small utility tray is depicted being attached to the side of the trolley. Two screws are shown for its installation.
Step 5: Completed Assembly
The final view shows the fully assembled 5-drawer tool trolley, featuring its characteristic drawers, side handle, and caster wheels.
Product Details
The product is identified as the "G21 Cooper 5 5-Drawer Tool Trolley". The drawer fronts are labeled with "Cooper 5" and a manufacturer's logo.
