BLAISE GT1 Motorcycle Helmet Intercom System

Product Overview

The BLAISE GT1 is a motorcycle helmet intercom system designed for communication and entertainment on the go.

Key Components:

• Intercom Button: Used for intercom functions.
• Intercom Indicator (Green): Shows intercom status.
• Voice Assistant Button: Activates voice assistant.
• Volume Down / Previous Song Button: Controls volume and music tracks.
• Power On/Off / Play/Pause / Intercom Button: Multi-function button for power and media control.
• Work Indicator (RGB): Displays system status and lighting effects.
• Charging Indicator (Red): Shows charging status.
• Charging Port: For connecting the charging cable.
• Speaker/Microphone Interface: Connects to helmet audio components.

Power On/Off

Power On:

• Press and hold the power button for 3 seconds.
• A power-on prompt tone will sound.
• The LED indicator will blink quickly.

Power Off:

• Press and hold the power button for 3 seconds.
• A shutdown tone will sound.
• The LED indicator will turn off.

Voice Prompt Language Selection:

• Double-tap the power button to switch between Spanish and English voice prompts.

Bluetooth Pairing

Bluetooth Waiting for Pairing: The work indicator (RGB) flashes quickly.

Bluetooth Pairing Successful: The work indicator (RGB) flashes slowly.

Intercom Pairing

Intercom Mode Activation:

• Short press the intercom button to enter intercom mode.
• Short press again to exit intercom mode.
• Long press the intercom button to toggle between intercom transmit and receive modes.

Intercom Connection Conditions: For pairing, one unit must be in receiving mode, and the other in transmitting mode.

Intercom Mode Lights:

• Green indicator light flashes fast: Enter transmitter mode (with voice prompts).
• Green indicator light flashes slowly: Enter receiver mode (with voice prompts).

Connection Success: The intercom indicator blinks once at intervals, accompanied by a success prompt. You can now communicate.

Adjusting Intercom Volume: Long press the volume up and down buttons.

First-Time Connection: After powering on both units, short press the intercom button on both to enter receiving mode. Then, long press the intercom button on one unit to switch it to transmitting mode for pairing.

Reconnecting: Once paired, simply power on both units and short press the intercom button to automatically reconnect.

Music Features

• Play/Pause: Short press the volume button when music is paused.
• Next Song: Long press the Volume + button.
• Previous Song: Long press the Volume - button.

Phone Features

Answering Calls:

• Manual Answer: Short press the power/intercom button.
• Automatic Answer: The device will answer automatically after 10 seconds (toggle this setting via double-click when Bluetooth is not connected).

During a Call:

• End Call: Short press the power/intercom button.

Incoming Call Actions:

• Answer: Short press the power/intercom button.
• Reject Call: Press and hold the power/intercom button for 2 seconds.

Other Phone Functions:

• Redial Last Number: Double-click the power/intercom button.
• Cancel Outgoing Call: Short press the power/intercom button.

Charging Mode

• When the machine is turned on and the charger is plugged in, the machine will automatically shut down.
• Charging: Red indicator light is on.
• Fully Charged: All lights turn off.

Lighting/Voice Assistant

• Lighting Effects: Long press the light/voice assistant button to activate/switch RGB lighting effects. RGB lights are off by default each time the device is powered on.
• Voice Assistant: Short press the light/voice assistant button to wake up the voice assistant.

List of Items

• GT1 Mainframe: 1
• Speaker Microphone: 1
• Base with Clip: 1
• Velcro Installation Package: 1
• Type-C Charging Cable: 1
• Instruction Manual: 1

Important Notice & Warnings

Installation Notice: Before installing in the helmet, connect your mobile phone according to the Quick Manual instructions to check the sound effect and volume. If there is a significant difference after installation, adjust the speaker position inside the helmet.

Safety Warnings:

• Do not expose the product to open flames to prevent explosions.
• Do not disassemble the product to avoid damage to internal electronics.
• Keep away from sharp objects that could damage the product.
• Store in a dry place if not used for an extended period.

FCC Compliance:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.