BLAISE V8S User Manual

Product Overview

The BLAISE V8S is a Bluetooth communication system designed for helmets, offering intercom, music, and telephone functionalities.

Buttons and Controls

• Volume Down: [short press] previous song, [long press] volume down.
• Volume Up: [short press] next song, [long press] volume up. [double click] to switch between Chinese and English voice broadcast, [double click] to wake [voice assistant].
• Intercom Button: [short press] to enter intercom mode, [long press] to switch between transmit/receive modes for pairing.
• Power/Voice Switch: [long press for 3 seconds] to turn on/off. [double click] to switch between Chinese and English voice broadcast.

Indicator Lights

• Work Indicator Light: [light flashes quickly] when not connected to Bluetooth. [short press successful: green light accompanied by blue light] when intercom pairing is successful. [light flashes blue and green quickly] after successful pairing.
• Charging Indicator Light: [red light] when charging, [light off] when fully charged.

Ports

• Mini microphone interface
• Type-C charging port

Important Reminder

If sound effect and volume differ significantly after helmet installation, adjust speaker position inside the helmet.

Telephone Function

When intercom and Bluetooth are connected to a mobile phone, the system automatically switches to phone call reception for incoming calls. After ending the call, intercom functionality resumes.

Call Handling

• Answer Mode: Automatic answer ([after 10 seconds]) or manual answer ([short press] during incoming call).
• During Call: [short press] to hang up the phone. [long press for 2 seconds] to refuse to answer.
• Other: [double click] replay of last number, [short press] cancel outgoing call.

Music Features

Controls for music playback:

• [play/pause]
• [previous song]
• [next song]
• [volume-down]
• [volume-up]

Intercom Function

Bluetooth Intercom Connection Operation

Intercom Mode Operation: [short press] the intercom button enters transmit mode. The other unit needs to [short press] to enter transmit mode and then [long press] to switch to receive mode for pairing.

Intercom Connection Conditions: One unit must be in intercom reception mode, and the other in intercom transmission mode for pairing.

First-time Intercom Connection: After units power on and before Bluetooth connection, [short press] the intercom button on either unit to enter intercom mode. Then, [long press] the intercom button on one unit to enter transmit mode. Intercom pairing can then be performed. After successful pairing, the light flashes blue and green quickly, enabling intercom calls.

Product Specifications

List of Items

• ① BLAISE V8S Host * 1
• ② Speaker microphone * 1
• ③ Clip type * 2
• ④ Screws * 1
• ⑤ Velcro * 1
• ⑥ Speaker Velcro * 1
• ⑦ Type-C charging cable * 1
• ⑧ Mini microphone * 1
• ⑨ Instruction Manual * 1

Important Notes

• Do not expose product to open flame to avoid explosion.
• Keep away from sharp objects to prevent product damage.
• Do not disassemble the product to avoid damage to electronic components.
• If not used for a long time, store in a dry place.

FCC Compliance Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.