Philips MainsFit LED T8 Tube
An energy-efficient and easy-to-install lighting solution.
Product Overview
The Philips MainsFit LED T8 Tube is a next-generation lighting product designed to replace traditional fluorescent T8 lamps. It offers significant energy savings, a longer lifespan, and improved light quality, making it an ideal choice for commercial, industrial, and retail environments.
This LED tube is engineered for straightforward installation, allowing users to upgrade their existing fluorescent fixtures without the need for complex rewiring or ballast replacement. The MainsFit technology enables direct connection to the mains voltage, simplifying the process and reducing installation time and costs.
Key Features:
- Direct mains voltage connection (no ballast required)
- High energy efficiency, leading to substantial energy savings
- Long operational life, reducing maintenance frequency
- Excellent light quality and consistency
- Environmentally friendly design, free from mercury
[Image: Two linear LED light tubes, one labeled 'LED'.]
Installation Guide
The Philips MainsFit LED T8 Tube is designed for a simple and direct replacement of existing fluorescent T8 lamps. Follow these steps for a safe and efficient installation:
Step 1: Safety First
Ensure that the power supply to the lighting fixture is switched OFF at the main breaker before commencing any work. If you are unsure about any part of the installation process, consult a qualified electrician.
Step 2: Remove Old Lamp
Carefully remove the existing fluorescent T8 tube from the fixture. This typically involves rotating the tube slightly and pulling it out of the sockets.
[Diagram: A fluorescent light fixture with a T8 fluorescent tube installed, labeled 'T8 LAMP'.]
[Diagram: The fluorescent tube being removed from the fixture.]
Step 3: Install MainsFit LED T8 Tube
Insert the Philips MainsFit LED T8 Tube into the fixture sockets. Align the pins on the tube ends with the sockets and gently push and rotate the tube until it is securely seated.
[Diagram: A Philips MainsFit LED T8 tube being inserted into the fixture sockets.]
[Diagram: Close-up view of the LED tube's end connector fitting into the fixture socket.]
Step 4: Electrical Connection (Direct Mains)
The MainsFit LED T8 Tube connects directly to the mains voltage. The internal driver eliminates the need for an external ballast. Ensure the fixture's wiring is compatible with direct mains connection. The tube connects to the live and neutral supply.
[Diagram: Electrical connection showing direct mains input ([Line], [Neutral], [Earth]) to the LED tube, bypassing the ballast.]
Step 5: Power On
Once the tube is securely installed and connections are verified, switch the power supply back ON at the main breaker. The LED tube should now illuminate.
Technical Specifications
The following specifications are typical for Philips MainsFit LED T8 Tubes. Specific model numbers may vary in exact performance characteristics.
| Specification | Details |
|---|---|
| Product Type | LED T8 Tube |
| Brand | Philips |
| Technology | MainsFit (Direct Mains Connection) |
| Ballast Requirement | None Required |
| Wattage | (Varies by model, e.g., 18W, 20W) |
| Length | (Varies by model, e.g., 1200mm, 1500mm) |
| Color Temperature | (e.g., 4000K Cool White, 6500K Daylight) |
| Voltage | 220-240V AC |
| Lifespan | (Typically 50,000+ hours) |
| Certifications | RoHS compliant, cULus certified |
Certifications:
This product meets environmental and safety standards, indicated by:
- RoHS compliant: Indicates compliance with the Restriction of Hazardous Substances directive.
- cULus certified: Indicates certification by Underwriters Laboratories (UL) and Canadian Standards Association (CSA) for safety and performance.
