FLORSJÖN Toilet Brush

Important Information

As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialised dealer.

FLORSJÖN Toilet Brush Assembly

Follow these steps to assemble your FLORSJÖN toilet brush:

1. Step 1: Assemble Handle and Brush Head

   Connect the handle to the brush head. The handle screws into the brush head. Ensure it is securely tightened by hand.

   [Diagram: A person screwing the handle into the brush head. A close-up shows the threaded connection being tightened.]

2. Step 2: Place Brush in Holder

   Insert the assembled toilet brush into its holder.

   [Diagram: The toilet brush being lowered into its holder.]

3. Step 3: Cleaning and Disassembly

   To clean or replace the brush head, remove the brush from the holder. The handle can be detached from the brush head by unscrewing it.

   [Diagram: The brush being removed from the holder and placed into a trash bin. Another diagram shows the handle being unscrewed from the brush head.]

KROKSJÖN Wall Mount Installation

Instructions for installing a KROKSJÖN wall mount, suitable for various bathroom accessories including the FLORSJÖN toilet brush holder.

[Information icon: ? KROKSJÖN product details, 24h symbol.]

Tools Required:

• Spirit level
• Pencil
• Utility knife
• Allen key (provided)

General Advice:

Screws and wall plugs are not included. Select fixings appropriate for your wall material. [Diagram: A cross ❌ indicating incorrect screw type.]

Installation Steps:

1. Step 1: Prepare and Mark

   Choose the desired mounting location. Use a spirit level and pencil to mark the position for the wall bracket.

   [Diagram: Person marking a wall with a spirit level and pencil.]

2. Step 2: Attach Wall Bracket

   Secure the wall bracket to the wall using suitable screws and wall plugs. Ensure correct alignment.

   [Diagram: Wall bracket being attached to the wall with screws.]

3. Step 3: Attach Accessory to Bracket

   Connect the accessory (e.g., holder) to the wall bracket.

   [Diagram: Accessory being attached to the wall bracket.]

4. Step 4: Secure Accessory

   Use the provided screws and Allen key to tighten and secure the accessory to the bracket.

   [Diagram: Hand using an Allen key to tighten screws.]

5. Step 5: Weight Limit and Cleaning

   The maximum load capacity is 1 kg (2.2 lb). For cleaning, use a spray bottle and cloth. Avoid incorrect methods.

   [Diagram: Weight symbol 1 kg (2.2 lb). Diagram: Spray bottle, cloth, and a cross ❌ for incorrect method.]