iClever BTH02 Wireless Headphones - User Manual
What's in the box
- 1 x iClever BTH02 Headphones
- 1 x Charging Cable
- 1 x 3.5mm Audio Cable
- 1 x User Manual
Illustration of the headphones, charging cable, and audio cable.
Overview
1) Illustration
Diagram showing the top view of the headphones with labels for: Power On/Off, Volume Up, Volume Down, Multifunction Button, LED Indicator Light, Micro USB Charging Port, 3.5mm Audio Cable, and Microphone.
LED Indicator Instruction
Headphones Status | LED Indicator |
---|---|
Power on | Blue indicator flashes 4 times |
Power off | Red indicator glows for 1s and goes off |
BT Pairing | The indicator flashes red and blue alternately |
BT Connected | Blue indicator flashes once every 7 seconds |
Low Battery | Red indicator flashes twice every 2 seconds |
In charging process | Red indicator lights up sturdily |
Fully Charged | The LED indicator light will turn blue |
Bluetooth Connection
1) Turn On The Headphones
Note: The headphones will automatically enter pairing mode when being switched on for the first time.
Illustration showing the headphones and a mobile device screen indicating Bluetooth pairing.
Music Control
Diagram showing the bottom view of the headphones with labels for controlling music playback: Previous Track (Press x3 Times), Next Track (Press x2 Times).
Phone Call
Diagram showing the bottom view of the headphones with labels for call management: Answer (Press x1 Times), End Call (Press x1 Times), Reject (Long Press 3S).
Specifications
- Premium 40mm Dynamic Driver
- Frequency Response: 20Hz - 20KHz
- Support: BT5.0 A2DP v1.2, AVRCP v1.5, HFPv1.5, HSPv1.2
- Bluetooth transmitter frequency range: 2.402-2.480GHz
- Bluetooth transmitter power: <4dBm
- Bluetooth transmitter modulation: GFSK π/4 DQPSK, 8DPSK
- Battery type: Lithium-ion Polymer (3.7V, 500 mAH)
- Battery charge time: <2hrs
- Music play time: 22hrs
- Weight: 0.15kg
- Frequency band: 2.402GHz- 2.480GHz
- Maximum transmission power: ≤8dBm
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
IC Caution
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
- (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Le presentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisee aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de 'appareildoit accepter tout brouillageradioelec trique subi, memesi le brouillageest susceptible d'encompromettre le fonctionnement.
Declarations
Hereby, Thousandshores Deutschland GmbH declares that the radio equipment type Wireless Headphones BTH02 is in compliance with Directive 2014/53/EU. The full text of the EU declaration conformity is available at the following internet address: http://files.iclever.com/BTH02-DOC-EN.pdf
Hiermit erklärt Thousandshores Deutschland GmbH, dass der Funkanlagentyp Wireless Headphones BTH02 der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: http://files.iclever.com/BTH02-DOC-DE.pdf
Learn more about the UK Declaration of Conformity, Please click below link to download. http://files.iclever.com/BTH02-DOC-UK.pdf
Logos for CE, RoHS, and recycling symbol.
Made in China
FCC ID: 2AUKD-BTH02