iClever Wireless Headphones

Package Contents

The package includes:

• 1 x iClever BTH13 Wireless Headphones
• 1 x User Manual
• 1 x 3.5mm Audio Cable
• 1 x USB Type-C Cable

Product Diagram

The headphones feature the following controls and indicators:

• Light On / Off button
• Volume + / Next Track button
• MFB (Multi-Function Button)
• Volume - / Previous Track button
• Power Button
• LED Indicator
• Type-C Charging Port
• 3.5mm Audio Input
• Microphone

On/Off

Power on: Switch the button to the "ON" direction. The LED indicator flashes blue for 1 second, and the colorful lights turn on.

Shutdown: Switch the button to "OFF" direction. The headphone turns off. The LED indicator flashes blue for 1 second and then goes off.

Bluetooth Pairing

In the power-on state, switch the button to the "ON" direction. The colorful lights are on, and Bluetooth enters the pairing state with red and blue lights flashing alternately.

Turn on the Bluetooth of your mobile phone. Find and select "iClever-BTH13" in the device list for Bluetooth pairing connection.

Light On / Off

Short press the "Light On / Off" button to turn the light on or off.

Volume Limit Gear Switching

1. Press and hold the "+" & "-" buttons simultaneously to switch the volume limit to 74dB, with a voice broadcast of “74dB”.
2. Press and hold the "+" & "-" buttons simultaneously to switch the volume limit to 85dB, with a voice broadcast of “85dB”.
3. Press and hold the "+" & "-" buttons simultaneously to switch the volume limit to 94dB, with a voice broadcast of “94dB”.

Operation of Buttons

Voice Prompt

How to Charge the Headphone

Connect the Type-C cable to the Type-C port on the headphone and a 5V power outlet (power adapter is not included). The indicator light will glow red to indicate charging. When the headphone is fully charged, the indicator light will change from red to blue.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

For more information about the Declaration of Conformity, please visit: http://files.iclever.com/BTH13-DOC-EN.pdf