KODAK LUMA 400 Portable HD Smart Projector

Quick Start Guide

Thank you for purchasing the KODAK LUMA 400 Portable HD Smart Projector. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty for details.

Please make sure to view and download the full user guide at https://www.kodakphotoplus.com/pages/luma-400-projector-support

Product Overview

Projector Ports (View A)

• 1. Lens
• 2. Air Outlet
• 3. Up button
• 4. Confirm / Back button (press more than two (2) seconds)
• 5. Right button
• 6. Left button
• 7. Down button
• 8. Power Indicator
• 9. Audio Output (3.5 mm)
• 10. USB-C Charging Input
• 11. USB Input/Power Out
• 12. HDMI Input
• 13. Reset
• 14. DC Input (15 V/2 A)

Projector Features (View B)

• 1. Power button
• 2. Speaker
• 3. Air Inlet
• 4. Tripod Dock
• 5. Rating Label
• 6. Non-Slip Mat
• 7. Focus Wheel

Remote Control

Remote Buttons

• Power On/Off button
• Confirm button
• Mouse button
• Back button
• AAA Battery compartment
• Indicator light
• Home button
• Direction Key
• Menu button
• Volume Control / Page Up & Down buttons

Remote Pairing

• Within two (2) minutes of turning on the projector, press and hold both the Volume Up (+) and Volume Down (-) buttons for approximately three (3) seconds.
• The indicator light on the remote will flash quickly and then stop. When the flashing stops, the remote has successfully paired with the projector.

Note on Volume Buttons

While the mouse button is activated, the Volume + or Volume - buttons will function as page up and down.

Using Your Phone

Control the projector with the KODAK LUMA App from the Apple App Store or the Google Play store for a more intuitive experience. Use your phone as a remote to navigate menus, mirror your screen, input login information, and control media volume. The reverse screen mirroring feature allows you to view the LUMA interface directly on your phone.

App Setup:

• Search for "KODAK LUMA" in your phone's app store.
• Download the app and ensure your phone is connected to the same Wi-Fi network as the projector.
• Open the app and follow the instructions to pair it with the projector for remote functionality.

Charging the Projector

Connect the projector to the provided charger and allow it to fully charge before first use. Use only the original charger. A flashing red indicator LED, a red battery icon on screen, or a "Low Battery" notification indicates a low battery. While charging, the indicator LED is solid red. Once charging is complete, the indicator LED turns solid white.

To charge, connect the cable to the USB-C charging port or the DC adapter to the DC port.

Powering the Projector On/Off

To turn the projector on or off, hold the power button on the side for three (3) seconds.

Note: The projector can also be turned on or off using the remote control's POWER button when connected to a power adapter.

Adjusting the Focus

If the image appears fuzzy or unfocused, use the focus wheel on the side of the projector. Turn the wheel up or down until the image is sharp and clear.

Note: If an image or video remains fuzzy after adjusting the focus wheel, try pressing and holding the confirm button to return to the main menu. If the main menu graphics are clear but the image is still fuzzy, the issue might be with the image or video quality itself.

Adjusting Volume

Use the Volume Up (+) and Volume Down (-) buttons on the remote control during playback. Volume controls are also available in the remote app on your phone.

Connecting to an External Device

To access photos or videos from a USB drive, insert it into the corresponding port and navigate to Source > File Browser.

For HDMI-compatible devices, connect an HDMI cable (an HDMI-to-HDMI cable is included) from the device to your projector. If your device requires an adapter, it must be purchased separately.

An AUDIO OUT jack is available on the left side for audio devices or headphones.

Note: When both an HDMI device and a USB drive are connected, the HDMI device takes precedence. Disconnect the USB drive to access other sources.

Connecting to a Wireless Network

Connecting to a wireless network enables the use of pre-loaded apps and downloading new apps from the app store, leveraging the Android operating system.

Steps:

• From the home screen, select Settings > Wi-Fi.
• Select the correct network from the list. Use the projector's or remote's arrows to navigate the keyboard and enter the password.
• The projector will connect to the network when it is in range.

Connecting a Bluetooth Device

Steps:

• From the home screen, select Settings.
• In the Settings menu, select Bluetooth.
• Turn on the device you wish to connect.
• Select the device from the Bluetooth list to connect.
• Wait a few minutes for the projector to connect to your device.

Screen Mirroring (Android/Windows - Miracast®)

Setup:

• From the projector home screen, navigate to the Source page, select Screen Mirroring, then select Miracast®. The projector's name will be displayed for identification.
• Ensure your device is connected to the same network as the projector.
• Activate the screen mirroring software on your device.

For Android Devices:

On Samsung devices, swipe down from the top notification bar to the expanded view, swipe left if necessary, and tap the SmartView icon to activate screen sharing.

Note: Check your device settings for screen casting/mirroring options. Names may vary (e.g., Cast, Screen Mirroring, Smart View). Devices must be running Android version 4.1.2 or later.

For Windows® 10 Devices:

• From the start menu, select Settings.
• In the Settings menu, select Devices.
• On the left side, select Connected Devices, then click Add a Device.
• Select the projector from the list and click Connect.
• A dialog box will appear on the projector screen to confirm the connection. Use the remote to highlight "Accept" and press the confirm button.
• Your screen will now be mirrored to the projector.
• When finished, select Disconnect on your device.

Screen Mirroring (iOS)

Setup:

• From the projector home screen, select Source > Screen Mirroring, then select AirPlay. The projector's name will be displayed for identification.
• Ensure your device is connected to the same network as the projector.
• Activate the screen mirroring software on your device.
• On your iOS device, swipe down to reveal the Control Center and tap the Screen Mirroring button.
• Select the projector from the list of devices and select Connect. A dialog box will appear on the projector screen to confirm the connection. Use the remote to highlight "Accept" and press the confirm button.
• Your screen will now be mirrored to the projector.
• When finished, select Disconnect on your device.

Customer Service Contact Information

For any product issues, please contact customer service before returning the item to the place of purchase.

U.S. Support: kodak@camarketing.com | 844-516-1539

International Support: kodakintl@camarketing.com | 844-516-1540

Trademarks and Licensing

The Kodak trademark, logo, and trade dress are used under license from Eastman Kodak Company.

Android is a trademark of Google, LLC.

Bluetooth is a trademark of Bluetooth SIG, Inc. USA.

DLP® and the DLP logo are registered trademarks of Texas Instruments.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and/or other countries.

Lightning, Mac, and AirPlay are trademarks of Apple Inc. in the U.S. and other countries.

iOS is a trademark of Cisco in the U.S. and other countries and is used under license.

Wi-Fi and Miracast are trademarks of Wi-Fi Alliance in the U.S. and/or other countries.

Windows is a trademark of Microsoft Corporation and other countries.

All other products, brand names, company names, and logos are trademarks of their respective owners, used merely to identify their respective products, and are not meant to connote any sponsorship, endorsement, or approval.

Distributed by: C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837, USA

©2021 C&A IP Holdings, LLC. All Rights Reserved. Made in China.