Product Overview
This document provides instructions for operating the Smart Ring, including its specifications, indicator lights, power management, mode switching, troubleshooting, and care guidelines.
The Smart Ring features two virtual buttons, a charging light, and connects via Bluetooth to compatible devices.
Product Specification
- Input voltage: 5V
- Input Current: 20mA
- Usage time: 8 hours
- Charging time: 90 minutes
- Bluetooth effective distance: 1.0 meters
- Supported system: iOS 13.6/Android 5.0 or above
Indicator Light Description
Status Indicator:
- Blue light flashes: Waiting for Bluetooth pairing status.
- Blue light stays on for 3 seconds: Bluetooth connected successfully.
Battery Indicator:
- Red light flashing: Low battery, please charge the device.
- Steady green light: The device is fully charged.
Power On
Press the two virtual buttons simultaneously for 6 seconds to power on the device. The blue light will flash, indicating it is waiting for Bluetooth connection.
To connect, turn on your phone's Bluetooth setting, find the device named "SO+" in the list, and connect it.
Note for Apple Users: To enable the auxiliary touch function, go to Settings > Accessibility > Touch > AssistiveTouch, and turn it on. Alternatively, you can say, "Siri, enable assistive touch."
Mode Switch
Long press the up button for six seconds. The purple light will flash.
- Purple light flashing once: MODE A (default, for remote selfie camera control).
- Purple light flashing twice: MODE B.
To PLAY/PAUSE/SKIP MUSIC, you must select MODE B.
MODE A
Supported Apps: TikTok, Instagram, YouTube
- Click the down button: Video page down
- Click the up button: Video page up
- Press the down button for two seconds: Take a photo
- Double click the up button quickly: Like video
MODE B
Supported Apps: Facebook, Twitter
- Click the down button: Video page down
- Click the up button: Video page up
- Press the down button for two seconds: Song pause/play
- Double click the up button quickly: Switch to the next song
Power Off
Long press both buttons for 6 seconds to power off the device. The red light will flash once.
Standby Mode
If the smart ring is idle for 20 minutes, it will automatically enter standby mode. To resume usage, the smart ring will automatically connect to the last paired mobile phone.
Troubleshooting
1. Bluetooth Connection Fails
Please ensure that the Bluetooth setting is turned on your phone or tablet.
If the smart ring has no power or low power, the Bluetooth connection cannot be made. Please charge the ring until the green light is visible.
Care and Maintenance Rules
- The surface of the ring is made of epoxy resin. Do not place hard objects against it to avoid scratching the surface of the smart ring.
- Do not contact with strong acid and alkali chemicals to avoid corrosion.
- The outer ring is made of epoxy resin, which is very tough and should prevent wear.
- Please clean with a neutral solution and a soft cloth.
- The ring contains batteries. Do not expose it to high temperatures for a long time.
