Smart Ring User Manual

Important Disclaimer

Please note that the ring service is not intended to diagnose, treat, or prevent any diseases or medical conditions. The information and data provided are for reference only and cannot replace the services of health professionals or physicians. Consult a professional physician for any health concerns.

Product Specifications

• Product Name: Smart Ring
• Product Weight: Approximately 5.0 grams
• Outer Surface Material: Stainless steel
• Main Material: Epoxy resin
• Memory: Built-in 512 KB
• CPU: PHY6222
• Heart Rate Sensor: HX3602
• Battery Capacity: 15 mAh per ring
• Standby Time: 10-15 days
• Charging Method: Magnetic charging (USB rated 5V)
• Connection Method: Low power wireless 5.1
• Operating System: Compatible with Android 6.0 and above, for iPhone 10.0 and above
• Waterproof Level: IP68

Usage Requirements

This device can only be used on Android and iPhone smartphones. System requirements: Android 6.0 and above, iPhone 10.0 and above.

APP Download

Scan the QR code or visit the APP Store or App Store to download and install the APP. Please accept all related permission requests. After installation, open the APP without logging in and bind the device to use it normally.

Component Introduction

The ring features a charging contact and a photoelectric sensor on its inner surface.

[Diagram Description: A circular smart ring, depicted with a charging contact and a photoelectric sensor on the inner surface.]

Charging the Ring

1. Magnetic Linear Charging:

Use the equipped magnetic charging cable to attach to the metal point on the inner ring. Connect the other end of the charging cable to a USB charging head or computer USB interface. Please charge the device for the first time when using this product; it will automatically turn on during charging.

Important: Use only charging accessories provided by the original factory. Non-original cables may cause reverse charging, leading to ring damage or accidents. Use a charging head that meets safety requirements (5V output voltage) or a computer USB port.

Charging time is approximately 1 hour from low to full. A red indicator light flashes during charging, and a green light flashes slower when fully charged. If no light flashes, reconnect the cable.

2. Storage Type Charging Compartment:

Remove the charging compartment and insert the provided USB charging cable into the charging port to charge it fully. The red light indicates charging, and the green light indicates a full charge.

When fully charged, attach the ring's charging contact to the compartment's charging port for convenient transport and recharging.

Tips:

• It is recommended to use magnetic linear charging for the first charge. Remove the ring from its charging case if charging with one.
• Do not leave the ring without power for extended periods, as it may become unchargeable or unable to power on.

Power On/Power Off

• Power On: Automatically turns on when charging.
• Power Off: Click the "Shutdown" option on the APP device page (this shuts down and saves the device after a full charge when not in use).

Device Connection APP

Navigate to the app, click the device module, then click the "Settings → +" icon to enter the automatic search list to find and connect the device.

The app automatically saves the ring's wireless address and will search for and connect to the ring when the app is opened or running in the background.

Note for Android users: Grant all notification permissions, such as reading contact information, and allow the app to run in the background according to your phone's settings.

APP Function Introduction

Healthy Three Rings

• Exercise (upper half of the outer ring): Data is collected from exercise sessions. Daily data is cleared early in the morning. Continuous activity for over 10 minutes (walking, running, etc.) counts as one exercise session. Set exercise goals in personal information.
• Calories (inner loop): Data is derived from exercise and step count. Daily data is cleared early in the morning. Set calorie goals in personal information.
• Standing (lower half of the outer ring): Data source is based on step count. If steps exceed 20 continuously within an hour, a "standing" hour is recorded. Daily data is cleared early in the morning. Set standing goals in personal information.

Activity Tracking

Step Counting: Records daily steps in real-time, resets to zero early in the morning. Set target steps and check completion rate.

Bar Chart: Displays the distribution of steps per hour from 0:00 to 23:00. A bar chart appears at corresponding times when steps are generated.

[Diagram Description: A bar chart illustrating the distribution of steps per hour throughout a day.]

History: Shows the number of steps, goal completion, and distance at various points in time.

Exercise

Details daily exercise duration, frequency, and calories burned.

Bar Chart: Displays the distribution of steps per hour from 0:00 to 23:00. During exercise, a bar chart appears at the corresponding time.

[Diagram Description: A bar chart showing step distribution during exercise periods.]

Exercise Records: Summarizes total calories burned, total exercise duration, and total number of workouts.

Sleep

Wear the ring to sleep. Connecting to the app allows you to check sleep quality, sleep depth, and wakefulness time, as well as view historical sleep data.

[Diagram Description: A representation of sleep data, showing total sleep time (e.g., 5 hours and 31 minutes) and sleep stages like Light Sleep.]

Explanation: Sleep data is recorded and available only when the ring is worn overnight and connected to the app.

Heart Rate/Blood Pressure/Blood Oxygen

When the ring is connected, measurements can be initiated via the APP. Historical data and curve graphs can be viewed. The ring automatically measures these metrics every 2 hours by default (monitoring stops during charging and sleep).

Searching for Devices

Connect to the app. Once connected, your phone can search for the ring, and the ring's LED light will flash to indicate it.

Remote Photography

When connected to the app, the app enters the remote control camera interface. Shake the ring, and it will automatically take a photo after a 3-second countdown, allowing the app to access saved selfies in the album.

Other Settings

Restore Factory Settings: Clears current steps, calories, and other associated app settings for the ring, restoring it to default configurations.

Maintenance

• Keep the ring clean and hygienic.
• Avoid using in high temperature and high humidity environments for extended periods.
• Pay attention to the cleaning and maintenance of the charging contacts.
• If not used for a long time, charge the device approximately every 20 days and store it with the power completely off.

Tip: This product cannot be sold as a medical device.

Precautions for Use

1. Wireless connection may be lost beyond a certain distance during use. The ring search function can only be initiated after reconnection.
2. Wireless connections may occasionally drop. Reconnect manually if the connection is lost for more than five minutes.

Common Troubleshooting

If you encounter problems, please refer to the following solutions. Contact the dealer or designated repair personnel if the issue persists.

• Unable to search for ring wireless: The battery level is too low. Connect a charger to charge.
• APP automatically disconnects from the ring:
  • The battery level is too low. Connect a charger to charge.
  • The distance between the phone and the ring is too far. Disconnect, reduce the distance, and reconnect automatically.
• The ring has a short lifespan: The battery is not fully charged. Ensure sufficient charging time.
• The ring cannot be charged properly: Check if the battery is usable, as performance may decrease after years of use. Verify the charger is functioning correctly; try updating or replacing the charger.

Safety Warning

• Never allow children and pets to play with this product, as it contains components that can cause choking.
• Do not replace the battery, open the casing, or disassemble the product without authorization, as this may lead to safety risks.
• Do not expose the product to very high or very low temperatures.
• Do not use this product in high temperature and humidity environments. Do not use chemical reagents to clean the product.
• Do not place the product in a high temperature and high pressure environment, as the battery may explode. Do not wear the product while charging. Do not charge the product when it is wet.