Apollo Wireless Stand Quick Start Guide

Product Overview

Product Name: Apollo Wireless Stand

Type: Fast Wireless Charging

Quantity: 1 (6PP)

Dimensions (Flat): 180mm Width x 100mm Height

Dimensions (Folded): 60mm Width x 100mm Height

Materials: 60g Woodfree Paper

Visual representation of dimensions: The product's flat form is depicted with a width of 180mm and a height of 100mm. When folded, it measures 60mm in width and 100mm in height.

Specifications

Input: 19V/1.3A

Output: 5W, 7.5W, 10W, 15W

Assembly Instructions

Follow these steps to assemble and connect your Apollo Wireless Stand:

1. Connect the Stand Top to the Base.
2. Connect the Cable to the Stand Base.
3. Plug the Wall Adapter into a wall outlet.

Diagram description: The assembly diagram illustrates connecting the top part of the stand to its base, then connecting a cable to the stand's base, and finally plugging the wall adapter into a power outlet.

LED Charge Indicator

Solid White: Device is charging.

Blinking White: Interference between the pad and your device.

Instructions for Proper Usage

• Always use the included Wall Charger for the safest and most efficient charging experience.
• The stand supports charging through most slim, protective cases (up to 3mm thick).
• Handle the device gently; avoid dropping it. Do not disassemble or attempt to modify it in any way.
• Contact Nimble directly if your product stops working or becomes damaged.

Warranty

This product is under warranty for 2 years from the original date of purchase. Please keep your proof of purchase.

Safety First

The built-in overcharge and temperature protection prevents overheating and manages charging voltage, even in extreme environments.

Important Care Instructions

• Stop using this product immediately if it becomes damaged.
• Never dispose of wireless chargers in household garbage.
• Send your old wireless chargers to Nimble for responsible reclamation.
• Clean the product using a dry cloth only. Do not expose to liquids.
• Avoid extreme heat, hot environments, and direct sunlight while charging.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Customer Service & Support

For FAQs and support, please visit:

Web: gonimble.com/support

Email: hello@gonimble.com

Company: Nimble

Affiliation: A Public Benefit Corporation