Nimble ChargeShot Wireless 5000mAh Battery Pack User Guide

Nimble ChargeShot Wireless 5000mAh Battery Pack

Product Overview

This document provides information for the Nimble ChargeShot Wireless 5000mAh Battery Pack.

Product Dimensions: 61 mm width, 90.5 mm height (packaging insert).

Product Size: 101mm Height x 68mm Width.

Quantity: 1 (4PP)

Material: 60g woodfree paper.

Logo Description: Features a silhouette of a dog with the text "TFC - FOR GOOD."

Specifications

Battery Capacity: 5,000mAh
Battery Type: 3.7V/5,000mAh
USB-C Input/Output: 5V/3.0A, 9V/2.22A, 12V/1.67A
USB-A Output: 5V/3.0A, 9V/2.0A, 12V/1.5A
Wireless Charging Output: 5W, 7.5W, 10W, 15W

Getting Started and Usage

LED Charge Indicator

Click the Power Button once. Up to four white LEDs will illuminate to show charging status and current battery level.

Charging the ChargeShot Wireless Battery

Connect the included cable to a power source (e.g., a Nimble USB Wall Charger) and insert the Type-C connector into the battery's USB-C port. For first-time use, charge the battery for 7-9 hours or until all four LED indicator lights remain on.

Charging Your Device via USB-C or USB-A Port

Ensure the ChargeShot Wireless Battery is fully charged. Connect your mobile phone or other USB device to the USB-C or USB-A port. If charging doesn't start automatically, press the Power Button once to wake the battery and initiate charging if it's in sleep mode.

Charging Your Device via Wireless Charging

Ensure the ChargeShot Wireless Battery is fully charged. Verify your mobile phone supports wireless charging (refer to your phone's manual). Place the ChargeShot Wireless Battery on the back of your mobile phone and press the Power Button once to wake the battery and start charging. A soft noise during charging is normal. It is also normal for the phone and charger to become warm; both are protected against overheating.

Turning Off and Stopping Charging

Stop charging by disconnecting your device or press and hold the Power Button for three seconds to enter sleep mode.

Important Care Instructions

Do not drop, short circuit, disassemble, or continue to use the product or charging cable if damaged.
Never dispose of batteries in the garbage. Bring used batteries to your local battery recycling center or return them to Nimble for responsible reclamation.
Clean the product using a dry cloth. Do not expose to liquids.
Keep this product out of reach of children and animals.
Avoid extreme heat, hot environments, and direct sunlight when charging. Storing the battery at temperatures above 76°C (170°F) for extended periods (more than 2 hours) may damage the battery and pose a fire risk.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Customer Support

For FAQs, visit: gonimble.com/FAQs

For customer support, visit: gonimble.com/support

Email: hello@gonimble.com

This product is from a PUBLIC BENEFIT CORPORATION.

	Nimble CHAMP Portable Charger 10,000mAh: User Guide and Specifications Comprehensive guide to the Nimble CHAMP Portable Charger (10,000mAh), covering LED indicators, charging modes, technical specifications, and important care instructions for optimal use.
	Nimble CHAMP Pro Portable Charger User Guide Instructions and specifications for the Nimble CHAMP Pro Portable Charger, a 20,000mAh power bank with 65W USB-C Power Delivery.
	Apollo Wireless Stand Quick Start Guide \| Nimble Get started with your Apollo Wireless Stand. This guide provides setup instructions, usage tips, safety information, warranty details, and FCC compliance for Nimble's fast wireless charging stand.
	Nimble Apollo Fast Wireless Charger: User Guide and Specifications Learn about the Nimble Apollo Fast Wireless Charger, including its input/output specifications, magnetic alignment, LED indicators, usage instructions, warranty, and FCC compliance.
	Monster Design Exemplars: Goblins and Troglodytes for Nimble RPG A guide to designing and running Goblin and Troglodyte encounters in the Nimble RPG system, including lore, stats, and adventure seeds.