VTech 7” Touch Screen Wi-Fi 1080p Pan & Tilt Monitor

About Your VTech 7” Touch Screen Wi-Fi 1080p Pan & Tilt Monitor

This monitor allows you to stay close to your baby when you are on the move or away. It is Wi-Fi enabled, using your home wireless network to stream live video and audio through the 1080p baby unit and 7-inch color screen parent unit. You can also monitor from your smartphone and mobile tablet using the MyVTech Baby Pro app.

How the System Works

The parent unit and baby unit connect in Direct mode by default for out-of-the-box streaming. For enhanced connection and remote monitoring, you can set up the monitor in Wi-Fi Router mode using your home Wi-Fi network. Auto mode automatically selects the most reliable connection.

• Direct Mode: Parent unit and baby unit connect directly. Live video streaming from the parent unit only.
• Wi-Fi Router Mode: Uses your home Wi-Fi network for connection. Supports parent unit and MyVTech Baby Pro app streaming.
• Auto Mode: Automatically selects between Direct and Wi-Fi connection modes.

What’s in the Box

Your baby monitor package contains:

1. Parent unit
2. Baby unit(s) (1 for RM7868HD, 2 for RM7868-2HD)
3. Power adapters (2)
4. Quick start guide

Protect Your Privacy and Online Security

VTech recommends the following best practices:

• Ensure your wireless connection is secure (WPA2-PSK with AES).
• Change default router settings (SSID and passwords).
• Keep devices updated with security patches.
• Disable Universal Plug and Play (UPnP) on your router.

For more information, visit:

• Federal Communications Commission: www.fcc.gov/consumers/guides/how-protect-yourself-online
• U.S. Department of Homeland Security: www.us-cert.gov/ncas/tips/ST15-003
• Federal Trade Commission: https://www.consumer.ftc.gov/articles/0382-using-ip-cameras-safely
• Wi-Fi Alliance: http://www.wi-fi.org/discover-wi-fi/security

Connect, Charge, and Power On the Baby Monitor

Connect the Baby Monitor

Use only the supplied power adapters. Ensure units are not connected to switch-controlled outlets.

Charge the Parent Unit Battery

The parent unit has a built-in rechargeable battery. Charge the battery for 12 hours before first use. The battery icon indicates the charge status.

Power On the Baby Unit

Slide the ON/OFF switch to power on the baby unit.

Parent Unit Overview

1. 3-level sound indicator light
2. LINK LED light
3. LED light (charging indicator)
4. TALK button
5. MENU | SELECT button
6. Arrow keys
7. Volume control
8. Zoom button
9. Power | LCD ON/OFF button
10. Microphone
11. Touch screen
12. Antenna
13. Speaker
14. Power jack
15. RESET button
16. Stand

Baby Unit Overview

1. Light sensor
2. Camera lens
3. Infrared LEDs (for night vision)
4. Microphone
5. Night Light
6. Night Light Control Key
7. LED indicator (connection status)
8. ON/OFF switch
9. Speaker
10. Temperature sensor
11. Power jack
12. Wall mount slots
13. PAIR button

Mobile Access

Install MyVTech Baby Pro Mobile App

Download the app from the App Store or Google Play Store. Search for “myvtech baby pro”.

Pair Your Baby Unit with the Mobile App

1. Press MENU on the parent unit, navigate to Connect Mobile Phone.
2. Scan the QR code displayed on the parent unit with your mobile device to download the app.
3. Follow the instructions in the mobile app to set up and pair your baby unit. Create a user account, activate it via email, and then pair the camera.

Basic Operation

Test the Sound Level and Position the Baby Monitor

Place the baby unit more than 3 feet (1 meter) away from your baby. Ensure the parent unit is also more than 3 feet away from the baby unit to avoid feedback. Adjust volume as needed.

Talk to Your Baby

Press and hold the TALK button to speak to the baby unit. Release to hear your baby.

Zoom

Press the Zoom button to zoom in or out.

Adjust Speaker Volume

Press the volume control buttons to adjust the parent unit speaker volume.

Turn On/Off Parent Unit Screen

Press the LCD ON/OFF button to turn the screen off. Press any key to turn it back on.

Reset the Parent Unit

Press the RESET button on the back of the unit with a pin.

Mount the Baby Unit (Optional)

1. Place the wall mount bracket on the wall and mark screw holes.
2. Drill holes and insert wall plugs if necessary.
3. Align the bracket with screws and tighten.
4. Place the baby unit on the bracket and slide to lock.
5. Adjust the viewing angle by tilting the bracket.

Monitoring Modes (RM7868-2HD only)

Choose from Single Mode (full screen of one baby unit), Split Mode (all baby units simultaneously), or Patrol Mode (cycles through baby units every 10 seconds).

• Single Mode: Displays images from the selected baby unit in full screen.
• Split Mode: Displays images from all paired baby units at the same time in split view.
• Patrol Mode: Displays a single camera view that transitions to a different baby unit every 10 seconds.

To change modes, press MENU, navigate to Monitoring Mode, and select your preferred mode.

Night Light

Control the night light remotely via the parent unit or directly on the baby unit using the Night Light Control Key.

• On the Parent Unit: Navigate to the Night Light menu to turn on/off, change color, adjust brightness, or set a timer.
• On the Baby Unit: Single tap the Night Light Control Key to turn on/off. Tap and hold to adjust brightness.

Melodies and Soothing Sounds

Select and play melodies or soothing sounds. Set a timer for playback or play non-stop. Adjust baby unit speaker volume.

General Settings

Configure Wi-Fi settings, connection modes, screen brightness, screen lock/off timers, temperature display format, language, reset settings, and software updates.

Alerts Settings

Adjust alert volumes, set temperature alerts (min/max), and enable/disable low battery and motion detection alert tones. Adjust motion sensitivity.

Help and Info

Access support information, system information, and privacy information.

Auto Software and Firmware Update

Connect your baby monitor to your secured home Wi-Fi network to receive the latest updates. Follow on-screen instructions for updates. Updates may also occur automatically when the parent unit is powered off and then on again.

Test the Location for the Baby Unit

Use the parent unit’s Wi-Fi signal strength indicator to find a suitable location for the baby unit. Adjust the distance between the baby unit and Wi-Fi router if needed.

General Product Care

Avoid placing the product near heating appliances or sources of electrical noise. Do not expose to direct sunlight or moisture. Avoid dropping. Clean with a soft damp cloth. Do not immerse in water or use liquid cleaners.

Storage

Store the units and adapters in a cool, dry place when not in use.

Frequently Asked Questions

• Can I turn the parent unit display screen off but keep hearing sounds? Yes, press the LCD ON/OFF button.
• Why is the baby unit not responding normally? Disconnect power, wait, and reconnect. Reboot the parent unit.
• Why is my screen in black and white? The baby unit automatically activates infrared LEDs in dim light for night vision.
• Why does my baby unit show offline or lose connection? Check Wi-Fi router settings. Other electronic products may cause interference; move the baby unit away from them.
• Why can’t I hear a sound? Increase parent unit speaker volume or set a higher sound sensitivity level.

Important Safety Instructions

Read all warnings and instructions. Adult setup is required. Do not install the baby unit above 6.5 feet (2 meters). This product is an aid, not a substitute for responsible adult supervision. Do not use near water. Use only the provided battery and adapters. Ensure proper ventilation. Do not push objects into openings. Do not disassemble. Test sound reception periodically. Supervise children to ensure they do not play with the product. Keep small parts out of reach of children.

Caution: Burn hazard, fire hazard, explosion hazard associated with battery mishandling. Do not expose to extreme temperatures or direct sunlight. Keep cords out of reach of children (more than 3 ft / 0.9m). Never place the camera unit in the baby’s crib or playpen. Do not cover the units.

Precautions for users of implanted cardiac pacemakers: Keep wireless devices at least six inches from the pacemaker. Do not place wireless devices directly over the pacemaker when it is turned ON.

Electromagnetic fields (EMF): This VTech product complies with all standards regarding electromagnetic fields.

FCC and IC Regulations

This equipment complies with FCC Part 15 rules for Class B digital devices. Operation is subject to conditions that it does not cause harmful interference and accepts any received interference. The baby unit should be installed and operated with at least 8 inches (20 cm) distance from all persons’ bodies. The parent unit transmitter and antenna should be held at least 1 inch (2.5 cm) from your face.

This Class B digital apparatus complies with Canadian requirement: CAN ICES-3 (B)/NMB-3(B).

This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSS standards. RF radiation exposure limits are met for uncontrolled environments.

Limited Warranty

VTech warrants the Product to be free from defects in material and workmanship for ONE (1) YEAR from the date of purchase (90 days for refurbished products). This warranty covers replacement of materially defective products. It does not cover misuse, accidents, unauthorized repairs, or damage from external causes. To obtain warranty service in the USA, visit www.vtechphones.com or call 1 (800) 595-9511. In Canada, visit www.vtechcanada.com or call 1 (800) 267-7377. Retain your original sales receipt as proof of purchase.

RBRC Seal

The RBRC seal indicates VTech’s participation in an industry program to collect and recycle lithium-ion batteries. Contact 1 (800) 8 BATTERY® for information on battery recycling.