FRÖTORP Coffee Table
Assembly Instructions
Introduction
Welcome to the assembly guide for your FRÖTORP coffee table. Please follow these steps carefully to ensure a smooth and correct assembly. Ensure you have all parts and tools before you begin.
Important Notes:
- Assemble on a soft surface, such as a rug, to prevent scratches. ❌
- Ensure all parts are correctly oriented before assembly.
- If you have any issues or have questions, please contact IKEA customer support. ?
Parts List
- 1x Allen Key [100092]
- 6x Screws (Type A) [124435 / 112522]
- 6x Screws (Type B) [10074074 / 10074193]
- 3x Connectors/Dowels [194765]
- 9x Wooden Support Planks [118578 / 10147716 / 10147613]
Assembly Steps
Step 1: Attach Legs to Main Frame
Place the main circular frame on a soft surface. Align the three legs with the designated mounting points on the underside of the frame. Insert screws [124435 / 112522] through the frame and into the legs. Do not fully tighten yet. ❌ [Incorrect orientation or force indicated by crossed-out diagrams].
Visual: Three legs being attached to the underside of a large circular frame with screws.
Step 2: Secure Legs
Using the Allen key [100092], fully tighten the screws inserted in Step 1 to secure the legs to the main frame. ??
Visual: Allen key being used to tighten screws connecting legs to the main frame.
Step 3: Attach Lower Shelf Supports
Position the three wooden support planks [118578 / 10147716 / 10147613] between the legs, forming the base for the lower shelf. Insert screws [10074074 / 10074193] through the legs and into the support planks. ⬇️
Visual: Three people inserting screws to attach horizontal wooden planks between the legs.
Step 4: Secure Lower Shelf Supports
Continue to secure the wooden support planks by tightening the screws [10074074 / 10074193] using the Allen key [100092]. ??
Visual: Allen key being used to tighten screws securing the lower shelf supports.
Step 5: Insert Connectors
Insert the three connectors/dowels [194765] into the pre-drilled holes on the top edge of the assembled frame structure. ⚪
Visual: Small round connectors being pushed into holes on the top of the frame.
Step 6: Place Lower Shelf
Carefully place the lower shelf (a large circular panel) onto the secured wooden support planks. ⬇️
Visual: A circular shelf being lowered onto the support planks.
Step 7: Attach Main Tabletop Frame
Align the main tabletop frame (the circular structure with legs) over the lower shelf. Insert screws [118578 / 10147716 / 10147613] through the frame and into the lower shelf to secure it. ?
Visual: The main tabletop frame being attached to the lower shelf with screws.
Step 8: Place Glass Top
With assistance, carefully lift and place the glass tabletop onto the main frame. Ensure the glass is seated evenly and does not rest on any sharp edges. ???
Visual: Two people carefully placing a large glass tabletop onto the assembled frame. Close-ups show correct placement and a warning against incorrect placement.
Step 9: Final Check
Perform a final check of all connections and ensure the table is stable. Make any necessary adjustments. ✔️
Visual: Two people inspecting the assembled table.
